thank you for the information my friend tried to use a aftermarket programming Smart key on his car and cleared memory I have a brand new Xtool D9 and the same procedure worked for it never done it before but your video was very helpful 😊🚗
Awesome video. I'm facing a similar issue, the key shows when inserted, but the immobilizer is active with the yellow key light solid by the check engine light and the car will not start. The alarm indicator never stops flashing yellow either. My car will only switch to On mode and get stuck there until I disconnect a battery terminal. This actually occurred once before, but cleared after letting the car sit with the battery disconnected for about 3 weeks. I'm sure this wasn't the fix and I just lucked up the first time. I have a 2014 Murano with only one key fob. I have the physical key for both, but lost the main key fob while troubleshooting the issue before. I've tried numerous steps online from holding the alert button for 5 seconds, holding the physical key lock position for 30 seconds, keeping the remote over 10 feet away overnight just to be safe, disconnecting the battery of my car for weeks now, changing the fob battery, using a strong jump device to ensure the battery on the car is strong enough, etc. Important Note: When changing the key fob battery, I did notice that one of the tips of the 4 prongs that contact the battery had broken off. I moved the prongs so all would make solid contact with the battery, but wonder if that could be the issue. I don't have the funds to take it to the dealership so I'm trying to do what I can to restore my transportation. Any info or suggestions would be greatly appreciated. Thanks and stay blessed! 🙏🏾
the only thing is try to get a locksmith and let him make you. one new key or at least insert one if not working you need to see a professional electrician or auto tech when comes to car electrical you need diagnose result
Sir, i have a similar scenario. It was running, same key, i went in to do some work, detached the battery, had to detach ecu because it was in the way, plugged everything back in, no start. I believe it is the steering lock sensor, i have acquire a used through the junkyard, set it so the motor inside doesnt work, still no start and key showing? Just curious of your location? Thanks
Hi Mr Mohammad , my name is Hamid, I saw your video but I don't have machine to diagnose my self so I need you to fix my 2011 Nissan Murano remote control please tell me how I can get you , Thank you
@@carmenriver1696 I did not figure it out, apparently it was intelligent mode and steering lock problems. I went to Nissan garage but they want over £2k to fix it. I have another company who is ready to fix it with just around half what Nissan demands. But it will take about 4-6 weeks before the parts arrived
Hi can i program duplicate key from autel maxiap200, i mistakenly delete duplicate key id kindly help, but original is working, can i reprogram with small portable maxiap200
thank you for the information my friend tried to use a aftermarket programming Smart key on his car and cleared memory I have a brand new Xtool D9 and the same procedure worked for it never done it before but your video was very helpful 😊🚗
Glad it helped
Awesome video. I'm facing a similar issue, the key shows when inserted, but the immobilizer is active with the yellow key light solid by the check engine light and the car will not start. The alarm indicator never stops flashing yellow either. My car will only switch to On mode and get stuck there until I disconnect a battery terminal. This actually occurred once before, but cleared after letting the car sit with the battery disconnected for about 3 weeks. I'm sure this wasn't the fix and I just lucked up the first time.
I have a 2014 Murano with only one key fob. I have the physical key for both, but lost the main key fob while troubleshooting the issue before. I've tried numerous steps online from holding the alert button for 5 seconds, holding the physical key lock position for 30 seconds, keeping the remote over 10 feet away overnight just to be safe, disconnecting the battery of my car for weeks now, changing the fob battery, using a strong jump device to ensure the battery on the car is strong enough, etc.
Important Note: When changing the key fob battery, I did notice that one of the tips of the 4 prongs that contact the battery had broken off. I moved the prongs so all would make solid contact with the battery, but wonder if that could be the issue. I don't have the funds to take it to the dealership so I'm trying to do what I can to restore my transportation. Any info or suggestions would be greatly appreciated. Thanks and stay blessed! 🙏🏾
the only thing is try to get a locksmith and let him make you. one new key or at least insert one if not working you need to see a professional electrician or auto tech when comes to car electrical you need diagnose result
@@BestCarFixes Understood. Thank you for the reply! Stay blessed, brother!
Sir, i have a similar scenario.
It was running, same key, i went in to do some work, detached the battery, had to detach ecu because it was in the way, plugged everything back in, no start.
I believe it is the steering lock sensor, i have acquire a used through the junkyard, set it so the motor inside doesnt work, still no start and key showing?
Just curious of your location?
Thanks
Sorry to hear that, call me 347-228-1875
You in NY?
Hi Mr Mohammad , my name is Hamid,
I saw your video but I don't have machine to diagnose my self so I need you to fix my 2011 Nissan Murano remote control please tell me how I can get you ,
Thank you
Your the best , do you provide training?
Soon
Where are you based please?
Good evening I am facing the same problem with my 2009 murano, how can you help please ?
Thank you
Mine too out of nowhere but my screen don’t work so this didn’t help... did you figure it out
@@carmenriver1696 I did not figure it out, apparently it was intelligent mode and steering lock problems. I went to Nissan garage but they want over £2k to fix it.
I have another company who is ready to fix it with just around half what Nissan demands.
But it will take about 4-6 weeks before the parts arrived
*intelligent module *
Do you have to have the j box ecu tool to learn the 09 murano key are just the Autel scanner
it depends what tools you have
Hi can i program duplicate key from autel maxiap200, i mistakenly delete duplicate key id kindly help, but original is working, can i reprogram with small portable maxiap200
what is that machine? where do yo plug that? can you please describe each step?
i use autel scanner wby obd2 i insert the key in ignition place or slot
@@BestCarFixes ok thank you
my mother took the key out of her fob and put it where the fob goes and now it wont come out how do i go about in getting it out
Call me please if you still need help 3472281875
hey i need help bro
Call me 12372281875