Custom Ported Truck Box Build for 4-8” Sundown Audio SA subs (under seat)
ฝัง
- เผยแพร่เมื่อ 12 ต.ค. 2024
- Tight spaces and big magnets, make for difficult build 😖 Customer raised the rear seat 3”, for this one and I needed every inch. I tried to keep the box tucked under the seat, as best I could. He will be pushing them with a Sundown 2K......enjoy ✌🏽
Been researching a while for ideas to get maximum airspace for my f150 to install 4 - EXL-X 8" Subwoofers. This is the only video I’ve seen where the person the person actually built the box right by considering SPL efficiency for maximum air flow. Impressed and that doesn’t happen often.
I appreciate you checking out this build and enjoying it bro 👍🏽 I had no idea, this one would be this popular with folks. 🤷🏽♂️ I get emails weekly about this particular build. Had a friend of mine send me a screenshot of a guy on FB, asking if anyone would build this one for him. Customer still has it in his truck and seems to be very happy with it 👍🏽 Thanks again bro!
@@210Designs are you in San antonio area by any chance? Only asking because 210 is the area code here and I would like to get a quote
@@gabrielgalaxygh Sorry bruh, Oklahoma. The 210 goes back to my 📟 days 😆 it was my code and spells out my name. Second and tenth letters in the alphabet 👌🏽 Thanks for watching and reaching out!
@@210Designs damn and haha the pager days. When life was simpler...
Thanks anyways and good luck to you.
You do great work
@@gabrielgalaxygh Thank you 👌🏽
Like a museum inside of that beautiful box, great job and thank you for sharing your talents
😆 thanks bro! I had to get creative with this build. Limited on space with this build for sure 👌🏽Thanks for watching!
I have 2 8's left. Someone jacked my deck, 10, and amp. Gotta build a box. Nice box😎
Sorry to hear that bro, but at least you have 2 of these monsters left. Ain’t nothing like a thief 😡
Your attention to detail is top notch!! Fantastic work.
Appreciate that young bro 👌🏽 Thanks for watching!
I just did a 3 8" build with these with a 2-1/2 lift and needed every inch.....those subwoofers sounds very good....gave them .75 each
That’s awesome man 👏🏽👏🏽👏🏽👏🏽 Definitely some monsters for sure.
Well my friend you did it again. Another Grand slam build. 👍👍👍👏👏🤘
The Beige Wonder - Thanks dawg! This one had me sweating on the mounting depth 😳 but it worked out.
@@210Designs I went to the gram for a demo. And man I see in the pictures that fit looked like it might need some chicken grease to pull off the fit lol 😂🤣😅👍
The Beige Wonder - Yea, I tried to get a couple vids, but they don’t do any justice. All I have is my 5 channel, 400rms on the sub channel. Yea, I coulda definitely used some for sure bro. Had me sweating over here.
Awesome build and video. Just what I needed, thanks a lot sir.. keep it up.
That flush mount is the lick!! Another dope one!
jaz97 - Thanks man! Think I’m gonna keep doing a flush trim baffle, on all my boxes. Unless the customer doesn’t want it.
Have to say!! You built that box wth passion !! Good job ..💪
Thank you very much 🙏🏽 Glad it showed man, because I sure did 🤙🏽
Very very nice build, thanks for sharing
Your more than welcome. Thanks for watching and your comment 🤙🏽
Nicely done, I enjoy watching your videos.
LIKES2CRAWL - Thanks bro, I really appreciate that 👌🏾 I’ve got several on here, showing different type builds and car audio.
Yeah that’s why I like your videos, it’s NOT the same design over and over.👍🏼
LIKES2CRAWL - Exactly 😁
This box is amazing! I need one for my ‘18 Silverado. Too bad you don’t ship.
Thanks homie, yea my hands are tide on shipping. Appreciate you watching and enjoying this build tho 💯
@@210Designs where are you located … I’ll come get the box
@@liljerry496 - In a small town in Oklahoma 👌🏽
Can you build me one for a 21’ gmc?
Nice job man. Piano so relaxing. 👍👌
Daniel Leon -I appreciate that bro!
Bro I swear you make these builds look so easy! Props!
FredTPLHarris - Thanks homie 👌🏾 I really appreciate that. I see you making great head way on that box your working on. Looks very complicated 🤭 Stay with it cause you know I’m watching!!!!
Man that box is beautiful
c Los - Thanks man, I really appreciate that. Definitely a crowd favorite 👌🏾
Hi, how's it going? MBE said to check out and give you some love so I subscribed to your channel. I'm VERY EXCITED to check out ALL of your videos!!! I LOVE BUILD enclosures but have figured out how to design them yet LOL. Oh SORRY my names Michael Groves from Warsaw, Indiana. I'm Every excited to see the pieces of ART that you have made!!!! I'm glad MBE sent me here!!! Have an AWESOME DAY!!! ✌
Thank you very much for your subscription to my channel Michael G. MBE is a talented builder and very knowledgeable in this car audio game. Always glad to help and share what we know with others. Please, feel free to checkout my posts and ask any questions you like. I have no secrets when it comes to my builds/installs. I only speak-on and give advice, on. what I’ve personally experienced myself 👌🏽 I love all types of car audio brands….no discrimination here. Again, thank you and MBE for your support 💯
Your welcome!! Thank you for what you do and what you share because in the first video I watched I learned how to fix the thing that I messed up on my first couple of enclosures. I like building my own because I like working with my hands and working with my son when he was helping me. It gives me great satisfaction to look when it's finished and say I built that. My whole lumbar is fused and when I'm building most of the time it takes my mind off the pain. Sorry for the long message. THANK YOU FOR SHARING and HELPING ME just in your first video I watched!!!! 😊😁
@@michaelgroves7178 You sir are more than welcome 🤝 That’s exactly why I share my builds…to help the next builder. There’s more than one way to build an enclosure. The trick is finding which works best for you. Glad to hear that about you and your son 👏🏽 quality time is priceless. As for your back….ouch bro. My father-in-law was the same way, so I have nothing but respect on that. Feel free to check any of my builds, old and new. Been listing for several years now and I believe I have improved since over the years 😆 If you ever have any questions or needing to run ideas, just hit me up. I’m also on IG@210.designs.
or email: bj.hammon@yahoo.com
Thanks again and happy building 👌🏽
this would fit in my truck no problem.. damn im jealous lol
Brad Price 😆😆 thank you and so am I.
Me to and by the looks of it i have the same truck. Interested in building another??
Great job! That box looks beautiful.
Tone Man - Thank you very much man! Was definitely one of my favorites 👍🏽
Awesome video brother. Your craftsmanship is mind blowing. Every video I watch of yours I go "how the f**** does this guy do this". Keep up the great work 👍👍👍
mpulford 311 - Thank you for sharing that man. I pride myself in my work and glad it shows. I’m always learning something new, which I love. Sometimes I set back and wonder the same thing 🤯
Dude ur a beast with ur builds..
Edgar Warner - Lol, I appreciate homie!
nice and clean! I too use the sawdust trick but I have recently started using the quick version of JB weld.
eric dudley - That’s what’s up! I have so much of it laying around, figured I’d keep using it....it’s paid for 😂 I may give thAt JB a try tho. Thanks for sharing bro!
@@210Designs yes I have sawdust in every nook and cranny I've got a bucket full of it.
nioce as always family. listen up folks class is in session!!
JJonescaraudio1 - That’s what’s up man. I really appreciate that 💯
Great work. Perfect to detail and quality .
Fabian Melendrez - Thanks man and I appreciate you watching as well 👌🏾
210 / Designs you’ve gained a new subscriber, please keep up the great videos.
Fabian Melendrez - Thank you very much bro 🙌🏽 I haven’t posted in a while, but getting ready to start back. Stay tuned 👌🏾
210 / Designs yes please do I sure there is lots of people out there that watches your videos. I ran across this video last night and I watched about 5 others.
Fabian Melendrez - Good deal man 👏🏽 Glad to hear that. I post vids for two reasons. To show how I build and to help the next builder. I love high end and entry level car audio. It will all perform as long as its used correctly 👍🏽
Seriously impressed with the wood work. However, the speaker terminals killed it for me...
kavio013 / Sorry to hear that 🤙🏾
Box like yours are my goal man you do amazing work bro keep up the great work
loudjunkey 420 - That’s up bro!!!! I really appreciate that, coming from another great box builder 💯 I’m trying to get on your power/pressure level 🤯 You keep it hard to breathe in those rides 🤙🏾
210 / Designs bro I put it together you care so much bout your work it’s unreal yeah I got loud build but bro your skills surpasses me by far I will admit that with no shame builder like you that take pride in there work me I got alil ghetto in me that say build it and it’ll be loud haha
Nice need me one of these for my f150
IKESTERrocks - Thanks! Customer had to raise his seat 4” for this one. Subs were huge!
@@210Designs no way overall or like it was at a angle?
Super build
S.L Subwoofer 1 - Thanks man 👍🏽
Awsome video man
Jorge bautista - Thanks bro, I really appreciate that 👌🏾 I’m on (IG@210.designs) for more frequent posts.
210 / Designs was just about to ask. Thank you!! Keep up the great work
Jorge bautista - Will do 👌🏾 Thanks again.
I would love to hear your boxes play
Roshun Flores - I’ve finally got my test station back up and running. I will start doing short demos. I can’t put full power to them, because it’s just a simple test setup.
Any idea what the spl was on those four 8s?
You did it once again brother. Happy New Year
Jmiyah11 Lol, I appreciate that bro. Happy New Year to you as well.
I like your work man great video i subscribed I'm new to this channel
The box you made does it fit a 2009 Chevy Silverado with the transmission hump on the floor? If so I would love for you to make me a box. Please text me back at your earliest convenience.
Yes, the customer’s truck had a 1” transmission hump. Unfortunately, I build locally in my area and not setup to ship my builds. I do know of (2) great builders that will ship.
facebook.com/customaudiobyjd?mibextid=LQQJ4d
facebook.com/mbenclosures?mibextid=LQQJ4d
Had to watch it on Mute!
Great work my Man
LFernandez919 - Thanks bro!!
@@210Designs are you locally in san Antonio
Wonder what this will do on the meter. Looks like it slams.
Steve Davis - Not real sure man. Customer is not into metering. Just likes his bass hitting tho 💪🏽
Very impressive.
Still love this build bro
😄 thanks bruh! I believe this is my most vied truck box build to date. Friends have seen screen shots of it on FB posts and people asking can any duplicate it for them 🤩 Customer is still rocking it in his truck 💪🏽
Beautiful Box !! Talk about custom fit like a glove 👍 what would be the biggest woofer size that would have the same fit on a 2018 Silverado crewcab jut like the one on the video?
jose anonas - Thanks bro! Yes it most definitely was. Su s were actually to big (magnet size and mounting depth) Customer had to list his rear seat, before I started the build. Factory height was to to low. It’s hard to fit most 8s u set the rear seat of these newer trucks, forward facing. Most have a front height of 7” I always recommend 6.5” for trucks. Makes things much easier, when designing a box. Plus they get loud and low like 8s 👌🏾
@@210Designs , Thank You for your response 👍
jose anonas - Anytime bro, I try to respond to every posts on my vids. Hope I was able to give you some direction. If you still want 8” recommendations, let me know. I’ll send some your way 👌🏾
Damn you elevator music, damn youuuuuuu!
😆😆😆😆👌🏽
Hey man, awesome box. Are you by chance in 210 (San Antonio). I'm a few hours south of that and I want to get an underseat box built for a 2022 F150 and your work looks dope.
What’s good Gene 🤝 Unfortunately, I’m located in a small town in Oklahoma. The “210” confuses a lot of folks 😆 It was my 📟 code, back in the day. Spells my name….2nd and 10th letters in the alphabet 👌🏽 Thank you for reaching out and the compliments. I hope you can find someone in your area, that can build your box.
Absolutely amazing
I’d love this box for my tundra! I bought a prefab a bomb one and put 4 skr svr and I’m just not happy
The way these subs/enclosure performed in the customers Chevy, I’m sure it would do the same in your Tundra. Hate to hear that about your current box tho…I mainly build locally in my area. This way I can guarantee both sub/box fitments and performance 👌🏽 Thank you for watching and the comment.
Looks so 🔥 you think 4 sa8s or 4 u8s would work in a 20 Ram 1500? Would really like 4 of the x8s but not sure I have the space with displacement. I was told could get around 2.9cu internal ported box under my seat. Trying to get the most output with what space I have with my DDM2000
Appreciate that homie 🤙🏽 Man that’s a hard one right there. The SA and U series both have huge magnets..which eat up air space. Customer had built spacer brackets and raised his seat 3” so we could get the cf and magnet clearances.
@210 / Designs dang 3" that's a good bit. That's what I was worried about if I could fit 4 8s under my seat. That's why I was also considering 4 1506s but I know the 4 8s would be louder but if I only can get 2.9cu box I might be close with 4 8s and jus have to do the 4 1506s
@@johnnypiper1717 Yea, originally it was only supposed to be (2) subs, so we had to refigure the design if he wanted it to work. I’m a firm believer in putting what will fit and not having to adjust the vehicle. I’d personally go with (4) 1506s and let’m eat off that amp. Those subs are no joke, don’t let the smaller size fool ya. I put (4) 6.5” Skars in a customer’s extended cab Chevy. Had everyone tripping when he would pull up 💯 and he was running them off an old school JL1000.1
@210 / Designs that sounds awesome, yeah I'm like you I much rather put the subs in a box that is made jus right for them and not have to raise my seats way up to the headliner lol. I know with those 1506s the box can be made jus right and I've seen videos of 4 1506s and they was slaming I could only imagine how loud they are in person. Think I may stick with my original plan and let them 1506s rip off that m2000. Appreciate the help bro and keep up the awesome work you make some killa ass enclousers 💯
@@johnnypiper1717 That’s what’s up bro! I think you’ll be much happier going that route. If you post an vids, I’ll be subscribing 👍🏽 Thanks again for your compliments and reaching out!
This box is perfect.. I’m deciding on what I want either 2 or 4 of these under the seat of my 2018 f150 crew cab. What would you recommend for deep bass out of the two? if you can tell me the specs of the box so I can find someone to build one for me?
Vonte94 - Thank you sir 👌🏾 Customer had to modify his back seat, in order to get these subs to fit. Two would be plenty for deep bass. I should still have the specs written down for this build. I’ll try and post them for ya.
210 / Designs appreciate that!
I building a box to put 3 sa8v3 under my back seat of 2013 f 150 limited with a seat lift. I think I currently will have 2.65 cubic ft. Do you think I should do 1 extra so I will have 4 total and how hard does this setup hit?
Monarch Lifestyle - If it was my truck, I would go with 3, just because of the limited airspace. This box sounded amazing, but I believe you will get more with 3. Hit notes with authority and grabbed the low notes with ease 👌🏾
210 / Designs thanks
Monarch Lifestyle - Anytime 👌🏾
Simply perfection
Brian Patterson - Thanks man, I really appreciate that. Trying my best.
Amazing work, and I'm running out of patience on a .75ft3 sealed box,
Appreciate it bro! These trucks have limited space, making it hard to get that subwoofer output, without modifications to the vehicle.
Love the box now the question is what's the ticket to build and ship?
Sorry bro I build locally in my area and don’t ship. To expensive and I have test fit all my builds in the vehicles.
I need a box just like this for my 14 Silverado how much they cost and yes I want it for 4 subs I will be powering them with my skar RP2000.1
God given talent right there man. Have you done anything like this for a 2004 supercrew f150?
Eugene Martin - That’s what’s up bro 👌🏾 thank you! No, can’t say that I have man. Folks mostly drive Chevy around here 🤷🏽♂️
Not an audio professional by any means. Would I be able to make a sealed box that size for my truck with 4x8s? I like the sound of my sealed box 2x10s in my truck currently. Thx
Johnny Giesbrecht - We all have to start somewhere bro. Yes it’s possible. However, the customer had to raise his rear seat 3”, in order to get this one to fit. Subs were to large for factory seat location.
@@210Designs awesome thx for the info
so nice
Brad Price - Thank you very much 👌🏾
Dam you got down on this box man. That's a dam good job!
I have a question. I'm building a box for 2-12s. I got a precision 4" flared tube port for it. Due to space the box will be about 2 cubic feet after sub and port displacement. My question is, when doing the formula to calculate port length, does the number of subs matter or will following the formula port length always give my the correct port length. My port length calculator doesn't ask how many subs, it only asks what tune I want, my box cubic feet and port diameter. So as long as I take into consideration and factor in the total sub displacement of all the subs, the port length calculator should be correct right?
Alexo - Thank you very much for the comment in this build. Yes port turning is based on net internal box volume and not the number of subs. A good average to figure squares inches required for a round port, is 9”-12”. *This is just average, I’ve went below and above these numbers and had no issues. Just stay close. Example: 2cf/net box x 9” = 18 square inches port area required Now factor your port (Port diameter / 2 = radius.
3.14 x (radius) squared = square inches of port area available).
damn i have a 2015 f150 and wante to use a underseat box but there none that suited me without using less power this is sick.. do you have a website? do you build for everybody or just locals
Brad Price - Thanks man I really appreciate that. Unfortunately I do not have a website and only able to build these boxes, for local folks. I do this in my spare time, as a hobby of mine. In all the truck boxes I’ve built, this one was by far the toughest. From a builders perspective, 6.5” subs are the way to go. No modifications needed to raise the seat and mounting depth is not an issue. Built one using 4-6.5” subs in a Silverado truck, that blew people away when he showed them what was in there.
210 / Designs understood .. it would still be great to be able to buy this box for what. 4 sa 8s or whatever subs.. how much did you charge for this?
Brad Price - I think the ticket was around $200 family friend.
210 / Designs very good deal lol.. you do very good work obviously know what you are doing
Brad Price - Thanks man, just trying to do my part out here. Helping people on a budget, get that custom quality work 👌🏾
Same truck I got and thats the box I been looking for, I know you only do locally but if you already built one would you build another and how much
Tionne Smith - 😆😆 I like that Conner bro 👌🏾 After I built this one I literally 🔥 the design. This one was very difficult for me and I decided it was my last 🤷🏽♂️ I do really appreciate you watching 🤙🏾
What’s the dimensions for 3-8” Sundown U series tuned to 33 for 2012 F150 super crew cab
Unfortunately I don’t know that one bro. If I had the truck, I could get all the measurements for ya 🤙🏽
Hey man. I have a 2017 Chevy Silverado Crew cab. What type of subwoofer set up do you recommend for that limited space? Awesome video by the way.
Edit: You know what never mind. The ending of the video just showed me. Again, awesome video.
Crew cab, limited? Lol. Rip them seats out and tell me how limited you are?! Jk, if you really insist on keeping the seats, then good luck. You can also have someone build a box that has the seats built on top of the enclosure.
Have you made any under seat box for 4 8’’ for a 2019 ram 1500
Hey Ricky 🤙🏽 Unfortunately I haven’t bro, but thank you for reaching out. You might hit up “mbcustoms” on here, FB or IG. He builds a lot of solid custom truck boxes.
Thanks for info
I can do this box how much I'm ready to get it done
Do you build and sell? Cause I would really like one for my 2016 f150 supercrew to fit under the rear seats..
Unfortunately, only locally in my area bro 🤙🏽 This way I have access to the vehicle and subs. To guarantee box & sub fitments, plus I can test the enclosure beforehand. Thank you for watching this vid and reaching g out 🫱🏽🫲🏼
I have a 83 El Camino I need a box with 4 Sundown 8s and the port in the middle. How much $$$
Definitely one I would need access to, in order to build one for. This is why I build locally in my area bro 👌🏾 Thanks for watching and checking in.
Yo 210/Designs I need some assistance I finally got this laptop right and plan on filming some videos this weekend. I was wondering what type of hardware would you recommend to mount my Soundqubed HDS 8"s in my T-Line enclosure? Would you use some standard wood screws or even some Wood- insert nuts with bolts? Either or what size would you recommend? The front baffle is 1in MDF and the rest is 3/4 MDF. What would you recommend? Thanks Big Bro
ZCustoms - Congrats on getting your electronics up and running homie. As to your question about mounting hardware. 99% of the time I use 1-5/8” coarse wood screws. When I need to upgrade (JL W713.5, 15” HCCA Orion’s, Skar VXF12, DD18”, Sundown ZV4 12”/18”, etc) I used 2” #12 coarse sheet metal screws. *recommended by JL Audio. Hope that helps. FYI- Always pre-drill your holes. I use a 7/64” drill bit, when using 1-5/8” wood screws. Drill at a small angle, away from the sub. This will insure you grab more wood, the further the screw goes in. Run them in with a drill, clutch set low. Then finish securing them manually. Haven’t had one strip yet or the sub vibrate loose.
ZCustoms - I used 1-5/8” on these SA 8s 💯
@@210Designs Nice thanks big bro. Yea it's time to start this TH-cam Journey no more procrastinating on it. This weekend I'm going to make my Intro video to my channel than follow up with a video of making a Trunk base floor and mounting and wiring the subs in the box and will start flogging of my daily mobile installs . And look out for some shout outs I will definitely be shouting you and your work and page. 2019 is going to be year to get everything rocking. Plan on also starting a Mobile detailing business as well. Big plans coming and watching your videos you know it inspires me to succeed.
Salute
ZCustoms - That’s awesome man!!!! I will definitely be locked in to your channels. I try to show my support as much as I can. And I greatly appreciate the respect bro. If you get some shirts or decals let me know and I’ll get some ordered, for me to rock over this way. 👌🏾
210 does that mean San Antonio anyway I need a speaker box for a F250 do you know where I could purchase one from you I mean a website
The Truth - Sorry buy the 210 isn’t an area code reference. It goes back to pager codes 👌🏾 I’m located in Oklahoma and do not have a website bro. I do these builds on the side.
Great build.
Had to turn off the audio though, was starting to lose hope and get a weird attraction to the lifetime television channel.
😆😆😆 Thanks for watching bro 👊🏽
Wow. Great vid. I want to build one for 4 8 inch under seat tuned to 32hz.vented. Do you have any plans you can sell. Or let me borrow. Lol. Its a 2003 gmc sierra 2500 crew with the bose system.
Thank you bro 🤙🏽 I believe the cut sheet is posted in the comments. Had no idea this box would be so popular 🙌🏽
th-cam.com/video/VlYVnov1Pdw/w-d-xo.html
James swain. I gotta 2004 chevy silverado 2500hd crew cab I'm dead set on putting 4 8s in. Getting everything up and out of the way right now. Idk if ur rear seat has the frame up under it but mine does 😐😐. If you have the same and have found something lemme know. If not I'll send you what I come up with.
@@austinleroy4915 I have the frame as well. And it sucks. I don't have any plans yet
I posted a link to my video on my previous comment. I've got measurements on there to of the space I've made if that helps any. I have 5.1 cubic feet using 1/2 mdf and 4.7 cubic feet using 3/4. I can get 5.8 on 1/2 and 5.3 on 3/4 if I throw another inch of washers on the top side of the seat lift. But it's made a ton of room at the very least there is no doubt I can fit three 8s. And the seats are still sturdy and still lift up and down.
@@austinleroy4915 would you happen to have the specs for this build
Hella clean
I’m trying to build one for my 02 Silverado but I dont understand what dimensions to make the box. I’m trying to make it to the specs of the subs I have. Could you tell me how you would measure the cubic feet of a box like this?
Here’s an app I still use when figuring on the fly. Very easy to use and a lot more stuff on the site as well. 👌🏽
www.the12volt.com/caraudio/boxcalcs.asp
Thanks a lot bro ✊🏽🙏🏽
@@TaylaFam Anytime 👌🏽
I was wondering if you can make the same box but for 10s
Unfortunately no, this box barely fit these 8s cf wise 🤙🏽
@@210Designs ohh ok cause i already have that same box but i want something more
@@cesarcardenas3209 Gotcha, yea these truck boxes are pretty limited on larger sub options. Unless you go sealed or face the subs up running shallow style.
How much will you charge me to build a box like this for my 2004 Ford F-150 crew cab
Thank you for watching and liking the build. Unfortunately, I only build locally in my area.
What does building somethin like that cost really curious but not sure where to go
urielgonzalez34 - My rates are below what normal shops charge, because I do this as a hobby and not to pay bills. With that being said, I can’t speak for them. This box was not a standard build for me. Very custom and critical on sub fitment. Anywhere from $300-$350 🤷🏽♂️
Hey man is there anyway I can get specs for a box like this? I’ll pay for it.
venosh rampersad I too would like the specs!
I would 3 lol. Need specs, help a brother out!!
2017 GMC Sierra 1500 base model double cab??? 2 10s???
Hey man. Perfect video. Definitely needed this for my 18 Silverado. I was wondering what were the dimensions of the port? I want to put a port out the front on my box
Thank you sir. I’ll check my notes and get back with ya 👌🏽
@@210Designs you are a legend 🙏
@@ShOcKtHeSyStEm527 Come on now 😆 I do alright bro 👊🏽 but thank you.
@@ShOcKtHeSyStEm527 Port tuned around 40hz, 19-1/4” Sq/Pa, 9% Moch
H: 5-1/2” x W: 3-1/2” x L: 21”
@@210Designs thank you so much 💪
I have a 2014 Chevy Silverado crew can I would like this same build for my truck...
How much would this cost plus applicable tax and shipping to Memphis, TN
Frederick Carter - Thanks for watching and leaving the comment. Unfortunately, I do not ship these enclosures. I build these locally and in my spare time.
Can I get the specs for the box so I can take it to a local shop... I’ll pay you for your time
Frederick Carter - Okay, when I get off work this evening, I’ll check my notes for ya 👌🏾
www.soundoffaudio.com/silverado-extended-cab/
@@bigtruckdriva901 Who are you using in Memphis for your audio? I am just south of the state line and been looking for a good shop
Are you able provide measurements/ design. I would be willing to pay for the design and information. What the overall measurements/ size of box, what is the box tune for etc
jackie walker - Thanks for watching, but unfortunately at this time, I’m not able to. Still working on getting this process up and running.
210 / Designs how about now do you have specs
But how does it sound on the truck is the question ? 🤔
FELIPE1JR - Sound great in his truck. Saw it last month in a local parade.
Hey are you close around Alabama or know some people in Alabama that can help me out with this set up?
Sorry bro, I’m not located anywhere near there. Only people I know out of my state are in Tennessee and Arkansas.
Dang, well ok thanks 👍🏾
How much for a box like this
Ivan Alvarado - I think this box ran him $250
@@210Designs How is that he raised the rear seat 3"? So if not raised it will be impossible to fit this side of subs? Or just because of the type of subs you needed more space for box volume?
COMPASBASSCLUB CHICALI - He made adaptor spacer brackets, so he could raise the hinged rear section of the seats. Had to, in order for the subs to fit. Wasn’t enough front baffle clearance across the front or magnet clearance, due to the top sloping angle of the box. Plus, it helped out with his air space as well. Box is on the small side, but he wanted 4 subs.
@@210Designs I got it now👍 hey will you recommend using 6.5" subs instead of 8" so that space wont be an issue. By the way, what type of truck was this? I am watching videos because I would like to do an under seat box for a Chevy z71 crew cab. Thanks!
COMPASBASSCLUB CHICALI - Glad you understood. And YES 🙌🏽🙌🏽🙌🏽 I would highly recommend 6.5” subs 🙏🏽 People are so afraid to use them. I’ve built several for trucks and they all sound amazing. Great output, mid and low end bass. Don’t get hung up rms of the subs. They get loud fast. Ran 2-6.5”200rms each subs in my personal four door truck. Maybe pushing 300-350 to them. Throbbed!!!!! Shook my steering wheel. Only reason I don’t have it now, guy heard it and bought it in the spot.....triple what it cost me 🤷🏽♂️
How much would it cost for a box like that for a 2002 Ford 150 for the same subs
Jay Allison - Not real sure bro. I’m only setup to build locally. But I really appreciate you watching and liking the vid 👌🏾
Dude how much do you charge for a build like this
Around $750.00
What’s the length on that box? I’m doing something similar but no way mine is that long.
49-3/4” 👌🏽
you think i could fit those under my 2001 dodge rams backseat
I’m not 100% sure bro 🤷🏽♂️ Customer raised his seat 3-1/2” and I’m not sure what the dimensions are in a 2001 dodge.
@@210Designs i'm gonna have to raise the seat a good bit for sure
Man the specs aren't listed anywhere I just went through all of it you are the answer to everyone's problem including myself awesome build but we need these specs!!!!!!!
😂 I usually don’t list them. Never thought this build would’ve been this popular. Had someone screen shot a pic and post it on FB asking if anyone could duplicate it. I’ll see if I can find the cut sheet and post the numbers 🤙🏽 Thank you for watching and your comment bro!
Aunt forgot about ya bro, just been covered up with other builds. Here’s my email and I’ll shoot those numbers to ya, first chance I get 🤙🏽Bj.hammon@yahoo.com
I'm gonna email you too bc I need these specs for the exact same truck
@@shanesmith6282 did you ever get the specs for this build if so could I get them ?
Man this one. I need some lessons on the crispy. Where do I sign up! Great job!
Poppa T - Lol, you know I gotcha bro. But I already know your talent level is off the charts. Thanks!
I would like to I need the box to be able to pick up 24 to 60. I recently built a fourth order For a Rockford Fosgate P3 12 it has great sound quality but I start losing SPL ataround 35 Hz.
I am so sorry the first comment I sent you is me asking you for a favor I’m so sorry. Let’s Start from the beginning are used to only buy generic boxes then I saw one of your videos on TH-cam Instintly subscribe! Your carpet work is grade A fucking number one by the way!! So I started watching your videos and then I started buying tools I seen that you had on the channel and now I’m pretty sure I got every woodworking tools you have. In the Last couple of months I’ve built 4 single sub boxes and 2 dual sub boxes And I got all my inspiration from you. You are my woodworking hero
Hey bud I am hoping to reach you. I love this box. I would really like to build it by chance did you write the dimensions down? Would you care to share?
I appreciate that bro 👌🏾 I believe I have them posted down in one of the comments. If not, let me know. This is a very popular box, that seems to get a lot of attention. Keep in mind, customer had to raise his back seat 4”, in order for me to get the box to fit. He bought the subs before he had me measure. Cart before the horse situation. So he had to modify in order for me to get everything to fit. Subs are HUGE!!!!!
How much it cost to build an under seat box for 4 8" subs Toro Force 8, for a 2021 Chevy Silverado 1500 Crew Cab?
That’s a good question and great subs 🙌🏽🙌🏽 Depending on the on the box extras, they start at ($300.00) I build locally in my area and do not ship.
What’s your area where are you located
@@javierhuitron2728 small town in Oklahoma 🤙🏽
@@javierhuitron2728 San Diego CA, 92127
Did you have to raise the seats? Measurements on the box?
arturo raygoza - Yessir, the customer raised it 3”
Where can I get the lift kit fo the seat?
Skill level 💯 great video but that piano 🎹 tho 👎👎👎
Appreciate the compliment bro. Next time, hit the mute button 🤙🏾
What was this box tuned at? Also that box looks amazing..
jayshafer16 - I believe around 36hz. And I appreciate that bro 👌🏾 Thanks for watching!
Wheeww that's low for under the seat. Thats what I been looking for, but I bet its loud also. That 3 inch rise scares me on my f150 but i want 8s and selling my 6.5 setup
How much do you charge for a box for 2 zvx 12
My boxes start at $500 and go up from there. Just depends on the build details 👌🏽 *Plus I build locally in my area and do not ship.
wanted to know how much to build one for my 2018 Silverado for 4 8" sundown
ruben ortiz - Thanks for watching bro, but unfortunately I build locally in my area 👌🏾
@
210 / Designs
How much does a box like this cost to be built??
amanda cavett - Can’t remember exactly, maybe around $275-$300
@@210Designs where are you located?
Jack Downey - Oklahoma
👍 As always!
Sinister - Thanks dawg!
Is there any way I could get all the dimensions for this build.. thanks
Sure, just email me….bj.hammon@yahoo.com
I'm thinking about doing 3 x 8s from sundown when I get my car this spring
kia bass 879 - Deezamn!!! That’s gonna be slamming for sure man. Post when you do 👌🏾
Could 4 8 inch skar zvx 8 fit in this box you design for those sundown
Charles Williams - Based on the subwoofers physical measurements, yes. Skar shows to require more internal cf tho.
I want to do this to my 2006 silverado crew cab, then I can get my rear seat back, sundown x12v2s take a lot of space..
tankdog03 - Yea, that’s a massive sub bro 🤭 I bet it sounds amazing tho.
Would it be possible to do one 8” without raising the seat?
Not in my opinion bro. Is toner had to raise the seat for 3 reasons: to increase airspace, magnet clearance (because of the decreasing slope of the box) and OD clearance of the sub. Sub is absolutely huge. Hope that information helps 👌🏾
What's the price of the box? (2019 Silverado 1500 Custom crew cab)
93241 - Not sure bro. I build locally and price each build individually 👌🏾