I got to step nine and was totally frustrated with the instructions. Why can’t they write a narrative and let you know which direction that parts L3 is supposed to face? Is it supposed to face in towards the shed or out towards the back of the shed? this is such a waste of time.
By far the worst experience in pieced together furniture ever. A box that comes with a pamphlet that knows your metal will be bent upon arrival and tells you how to unbend it, clearly doesn't care about the user experience of this horribly made piece.
Well, this certainly is a challenge, and will test your ingenuity to the limit! From misaligned screw holes to 1/2" screws with a plastic washer - almost impossible to hold - to very flimsy metal that misbehaves and the only tool provided is a tiny pozi drive - again too small to handle or do the job. I am now into day two, and am about to start cutting structural timbers to try holding this together. Let's face it - this is not one of Amazon's best deals. It is very unlikely to stand the test if time!
Be carefully on how you position the pieces because I went through the exact same problem until I looked at the guidebook carefully and saw that I had everything all wrong. Not every wall piece goes the exact same way it’s positioned differently and make sure the rods on top are the correct ones. 👌
Tip: make sure L1, L2, and L3 lips are facing inwards. Unfortunately this video and the instruction book don't show it well enough. Here is a link to a video I thought was very helpful. th-cam.com/video/0zUFH1f4UTA/w-d-xo.html
😭😭😭 That's what I thought seeing as the top didn't fit right!! After I done put it all together now gotta take it apart! They really do not show that!!
At point 3.44 in the video they show it clearly wrong L1 and L2 are facing the outside. That’s why multiple people have made the same mistake. They need to fix it.
OMG! Bless you! I thought that the L1 & 2 pieces had been mislabeled, as they only fit on the opposite wall when facing OUT. Then, when the roof didn't line up, it occurred to me that it might if the L pieces faced inward. However, I double and triple checked the instructions and they CLEARLY show those pieces facing out. So after six hours (four of which were spent trying to figure out and force the roof into place), I'm heading back out into the cold to take it apart AGAIN. I'm sincerely hoping your tip will have done the trick. Thank you!
Did not help. Will return , the holes are all misaligned. Side note. Double checked. All the backside holes on the roof are wrong so beware. Calling the manufacturer to see if they will help. 2 hours of carefully troubleshooting and double checking we did everything right. The roof parts are wrong. The rest went together very easily.
Union Carpenter of 40 years and it took 5 hours to put the piece of 💩 together. Looks great in a picture but it is cheap and flimsy. The instructions are nearly useless. I could of built it out of wood faster.....
Husband and I had an ok experience putting this together. All holes were aligned properly and it took us a little under 3 hours to complete.
I got to step nine and was totally frustrated with the instructions. Why can’t they write a narrative and let you know which direction that parts L3 is supposed to face? Is it supposed to face in towards the shed or out towards the back of the shed? this is such a waste of time.
S3&S4 didn’t line up at all
I’m having that Same problems
Same here...Im likely gonna drill the holes to align. 😣
Ditto, it’s not even close either.
same here, the holes are about 1 inch off
Same here and it's frustrating as hell
My l3 l4 holes were drilled wrong had to make new ones.. the roof panels don't even line up the correct holes wtf...
Ya this thing is a POS. Great price but with the time I spent modifying it I should have got a better product for more $
Damn I am glad I saw this have to do the same thing 🤬
Yep you have to stretch the roof! Push in the walls, make new holes and spray foam the gaps, cracks and holes. Wtf is right.
Just finishing shed putting the roof on the dam shed jesus I had to make so many extra holes
Same thing i had to do smh
By far the worst experience in pieced together furniture ever. A box that comes with a pamphlet that knows your metal will be bent upon arrival and tells you how to unbend it, clearly doesn't care about the user experience of this horribly made piece.
Well, this certainly is a challenge, and will test your ingenuity to the limit! From misaligned screw holes to 1/2" screws with a plastic washer - almost impossible to hold - to very flimsy metal that misbehaves and the only tool provided is a tiny pozi drive - again too small to handle or do the job. I am now into day two, and am about to start cutting structural timbers to try holding this together. Let's face it - this is not one of Amazon's best deals. It is very unlikely to stand the test if time!
How do I anchor the bottom frame no anchor bolts in packaging,do I have to buy my own?
Be carefully on how you position the pieces because I went through the exact same problem until I looked at the guidebook carefully and saw that I had everything all wrong. Not every wall piece goes the exact same way it’s positioned differently and make sure the rods on top are the correct ones. 👌
Tip: make sure L1, L2, and L3 lips are facing inwards. Unfortunately this video and the instruction book don't show it well enough.
Here is a link to a video I thought was very helpful.
th-cam.com/video/0zUFH1f4UTA/w-d-xo.html
😭😭😭 That's what I thought seeing as the top didn't fit right!! After I done put it all together now gotta take it apart! They really do not show that!!
At point 3.44 in the video they show it clearly wrong L1 and L2 are facing the outside. That’s why multiple people have made the same mistake. They need to fix it.
Yep. Happened to me too. The whole thing was already put together.
Wished I saw this comment before started. They need to redo this video and emphasize this part.
OMG! Bless you! I thought that the L1 & 2 pieces had been mislabeled, as they only fit on the opposite wall when facing OUT. Then, when the roof didn't line up, it occurred to me that it might if the L pieces faced inward. However, I double and triple checked the instructions and they CLEARLY show those pieces facing out. So after six hours (four of which were spent trying to figure out and force the roof into place), I'm heading back out into the cold to take it apart AGAIN. I'm sincerely hoping your tip will have done the trick. Thank you!
Are these sizes pretty much all the same set up??
very helpful , thank you! :)
Again where are the anchor bolts for the bottom frame or are they not in the package.
Why was this in my suggested???
Yo the roof is by far the worst .. nothing lined up.. now I need to tackle the rest another day
Did not help. Will return , the holes are all misaligned.
Side note. Double checked. All the backside holes on the roof are wrong so beware. Calling the manufacturer to see if they will help. 2 hours of carefully troubleshooting and double checking we did everything right. The roof parts are wrong. The rest went together very easily.
Union Carpenter of 40 years and it took 5 hours to put the piece of 💩 together. Looks great in a picture but it is cheap and flimsy.
The instructions are nearly useless.
I could of built it out of wood faster.....
Nice video until the end where the gahdamn door is still a rocket science project !
Okay
URA piece is terribly made ..
These were the worse instructions ive ever used. What should have taken an hour took half the damn day.
SOME PEOPLE CAN FIGURE STUFF OUT SOME JUST CANT LOL
Where the he’ll are the V2s