Hey man, so I was wanting to get a pair of these and was curious to know if there is any wiggle to them (up or down) I put a set of PM levers on my last Harley and the flopped around a good bit, had to go buy some Teflon washers to keep it from moving so much. Just curious if the fit is OP
@@boykin8705 I haven't had any issues thus far with mine. I got the 1" I think (stock harley bar size) and they've been top notch. Tripp_hpjunkie also had a set so you could hit him up for a second opinion. I'll be getting another set for the low rider s as well.
Did you have any issues with the clutch adjustment on the cable? When putting these levers on. Any slippage or trouble disengaging/ engaging My 00 FXDX seems to be slipping at high rpm. Wasn’t doing it before which makes me feel as it’s in the cable adjustment instead of the clutches.
Thinking about switching from a naked Suzuki to a Harley style bike. Prefer look dyna. What do you recommend? Never rode a Harley bike at all. But think they are bad ass and want one
The easy answer: Hecks yeah! Do it! The hard truth: That's a tough one. Of course I love the dyna. The pros: dope bike, sounds beastly, fun/challenging learning wheelies (if that's your thing), comfortable for ripping around town. Cons: something will break if you're doing wheelies More expensive than most bikes Not so fast as sport bikes. Before making the leap, I would try to get your hands on one and take it for a spin to make sure its what you dig. (I'm pretty sure you will. Lol). Let me know what you end up doing.
Jon's Moto Garage ok coo thanks for that. Keep the video coming bruh I enjoy them... ya maybe I will go test ride one. But you are right about the expensive side of it. But I am union guy so I feel it only right to go American made
Does the neutral light come on after changing levers? I saw some negative reviews on these levers saying it defeats the neutral disengagement switch or something. I have a set coming tomorrow for my FXDLS
What did you do about the clutch button? I notised the lever does not have a spot that presses it in when you pull it in. Do you just hold the button then you start it?
Stock mirror I know for sure can be attached if you purchase the additional piece (I think it's like $15. Not sure on turn signal cause mine have been removed in the front. Thanks for checking the vid! Ride safe!
@@TrippHPjunkie at least when you do learn, you'll have the know how to competently repair the bike, unlike a dude I know who can't get torque specs right. Hahaha.
Jon's Moto Garage yeah that’s about right I paid 15 for mine it was completely stock , my Instagram is Nsinko1 check it out ! I’ll be posting videos once it’s warmer out on here
I've experienced a few bikes with the strongman levers...lol...gotta use two of my hands to pull in the clutch...hahahaha. I guess I've been spoiled. :)
![⭐ฮิตในTikTok!! ( หมูเด้ง MooDeng ) Ver. แดนซ์โจ๊ะๆ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/3krsyfWUeHU/mqdefault.jpg)
What do you think of my new wheelie button!?
Dunno havent watched the Vid yet LOL
@@Patrick-HD Get on it, broseph! Hahaha
Yeah, go check it out! I dig the 2.5, but it's all about what works best for the individual.
Hey man, so I was wanting to get a pair of these and was curious to know if there is any wiggle to them (up or down) I put a set of PM levers on my last Harley and the flopped around a good bit, had to go buy some Teflon washers to keep it from moving so much. Just curious if the fit is OP
@@boykin8705 I haven't had any issues thus far with mine. I got the 1" I think (stock harley bar size) and they've been top notch. Tripp_hpjunkie also had a set so you could hit him up for a second opinion. I'll be getting another set for the low rider s as well.
thanks for the review, just ordered the whole setup with brake fluid reservoir
Did you have any issues with the clutch adjustment on the cable? When putting these levers on.
Any slippage or trouble disengaging/ engaging
My 00 FXDX seems to be slipping at high rpm. Wasn’t doing it before which makes me feel as it’s in the cable adjustment instead of the clutches.
Super clean. Went out and did a ride today popped 3 good willies . thought my camera was on but it seems the battery starting to fail on me.
Hecks yeah! The blue wheelie machine!
A must for Harley! I got the 2.5 finger but felt like a 3 finger so I saw off a half inch
Thinking about switching from a naked Suzuki to a Harley style bike. Prefer look dyna. What do you recommend? Never rode a Harley bike at all. But think they are bad ass and want one
The easy answer: Hecks yeah! Do it!
The hard truth: That's a tough one. Of course I love the dyna. The pros: dope bike, sounds beastly, fun/challenging learning wheelies (if that's your thing), comfortable for ripping around town.
Cons: something will break if you're doing wheelies
More expensive than most bikes
Not so fast as sport bikes.
Before making the leap, I would try to get your hands on one and take it for a spin to make sure its what you dig. (I'm pretty sure you will. Lol). Let me know what you end up doing.
Jon's Moto Garage ok coo thanks for that. Keep the video coming bruh I enjoy them... ya maybe I will go test ride one. But you are right about the expensive side of it. But I am union guy so I feel it only right to go American made
@@tbop610 Heck yeah! Support local! Thanks for the encouragement! I'll keep rolling as long as it's a good time. Hahaha.
Does the neutral light come on after changing levers? I saw some negative reviews on these levers saying it defeats the neutral disengagement switch or something. I have a set coming tomorrow for my FXDLS
Would you say this helps in traffic and fatigue
With a stock clutch spring it probably would.
Thanks for doing a review on these levers! Does anyone have experience with these compared to the 1FNGR levers? Any recommendations.
What did you do about the clutch button? I notised the lever does not have a spot that presses it in when you pull it in. Do you just hold the button then you start it?
I just start the bike in neutral. Took me a few months before I realized why it wouldn't start kn gear! Hahaha!
Can I attach my stock turnsignals and mirror to this clutch setup
Stock mirror I know for sure can be attached if you purchase the additional piece (I think it's like $15. Not sure on turn signal cause mine have been removed in the front. Thanks for checking the vid! Ride safe!
Ever think about putting a handbrake on the Dyna?
I wanna dial in wheelies with the foot brake first. At some point, I may move into the hand brake stunt scene.
I guess I need more practice.....lol great video man....thanks for the plug man.....🤜🤛
Hecks yeah! Hahaha...you gotta love the clickbait.
@@JonsMotoGarage I need to learn it....lol
@@TrippHPjunkie at least when you do learn, you'll have the know how to competently repair the bike, unlike a dude I know who can't get torque specs right. Hahaha.
@@JonsMotoGarage haha seen it happen 100 times man....it aint no thing
Thanks for the info I just ordered a set
hey jon aawesome channel ! just ordereed the elite set any mods you had to do to the clutch cables or anything ?
NICE! I didn't have to do any mods to the cable. Install was wicked easy. Get ready for launch mode! Lol.
NICE! I didn't have to do any mods to the cable. Install was wicked easy. Get ready for launch mode! Lol.
Jon's Moto Garage super excited hopefully I get this low rider S off the ground !
@@Sinkooh I've been eyeing a low rider s...only problem is the dude wants 18k. Lol. Let me know if you throw up any vids! Roll safe, bro!
Jon's Moto Garage yeah that’s about right I paid 15 for mine it was completely stock , my Instagram is Nsinko1 check it out ! I’ll be posting videos once it’s warmer out on here
Wonder if that would fit on my sportster 1200
Dam I sure could use a DRZ super secret squirrel 🐿 wheelie button.
You can find them on amazon for pretty cheap. hahaha
Wouldddd of been nice if there was a link
I've experienced a few bikes with the strongman levers...lol...gotta use two of my hands to pull in the clutch...hahahaha. I guess I've been spoiled. :)
Hahaha...the good ol two hander clutch pull!
5:15 that little burp was too cute bro. lol
i also have a Wheelie button on my bike :) only im afraid to play with it LOL
Hahaha...whatever you do, do NOT hit the big red button!
I need a new wheelie button I think mine is broken. Lmmfao
Hahaha...mine is still getting fine tuned. Lol.
thought the secret was the rear brake ... just blaze ... FXDLS
Hahaha...that's the secret to not looping out.
The drz is waiting to be ridden 😢
No worries, my plan is to poast at least one drz vid per week.
Nice
snaps clutch cables
what do you mean by that?