In English 1 disconnect the battery power connectors, ie two yellow connectors. 2. disconnect the charging connectoor, the white one. Then reconnect it. 3. Press power button for 30 seconds. 4. plugging in the charger to the charging port. 5. the charger's light blinks red and green alternatively. 6. after 10 minutes, the charger light will turn to red, charging is going on now. The battery is activated . The video stops here. I think you just let it charge up to green, then reconnect the yellow connectors. put the cover back. Done. Now add @novazeus's observation to the instruction: power on to the charger first before plug it to the charging port.
Stephen Banks: that's where I'm looking to get one. Some seem to arrive with the batteries completely flat, although, as seen with this video it's fixable. Thanks 👍
Please can you do a new complete video by explaining all it in English? We are all people around the world who use ninebot one Z10 and we don't understand Chinese. Thank you very much
Colleague, on my new Z10 has not yet been activated the battery. I did everything you did on your video, but the charger is still green, meaning it is not charging. Do you have another suggestion ???
Do you have resolved the problem? I just open my chrismas present today and i have the same problem is not working it still green and it dorsnt change to red to start charging
hi guys, it immediately presents a problem unfortunately ... if I press the start button, it does not turn on. If I connect it to load it, the LED changes from green to red and does not seem to load anything. 😔
Here's it in English copied from euc forum 1 disconnect the battery power connectors, ie two yellow connectors. 2. disconnect the charging connectoor, the white one. Then reconnect it. 3. Press power button for 30 seconds. 4. plugging in the charger to the charging port. 5. the charger's light blinks red and green alternatively. 6. after 10 minutes, the charger light will turn to red, charging is going on now. The battery is activated . The video stops here. I think you just let it charge up to green, then reconnect the yellow connectors. put the cover back. Done. observation to the instruction: power on to the charger first before plug it to the charging port.
In English
1 disconnect the battery power connectors, ie two yellow connectors.
2. disconnect the charging connectoor, the white one. Then reconnect it.
3. Press power button for 30 seconds.
4. plugging in the charger to the charging port.
5. the charger's light blinks red and green alternatively.
6. after 10 minutes, the charger light will turn to red, charging is going on now. The battery is activated .
The video stops here. I think you just let it charge up to green, then reconnect the yellow connectors. put the cover back. Done.
Now add @novazeus's observation to the instruction: power on to the charger first before plug it to the charging port.
Did you have to do this with your z10?
@@gordonmculloch4904 my z10 was ok for charging battery had no bars but charged up when i plugged it in
Stephen Banks: Thanks. Did you buy direct from China?
@@gordonmculloch4904 yes from AliExpress
Stephen Banks: that's where I'm looking to get one. Some seem to arrive with the batteries completely flat, although, as seen with this video it's fixable. Thanks 👍
In the same boat here. The LED won't turn red even after following in the recommended procedure. Bought from Gearbest...
More suggestions please!
I have the same problem.. Do you have found the solution?
@Roger smith i checked the battery and only have 6.6v.. So the battery is dead :)
@Roger smith 57v.. is completely gone. But aliexpress have already give me reason and they will send me back all the money
Please can you do a new complete video by explaining all it in English? We are all people around the world who use ninebot one Z10 and we don't understand Chinese. Thank you very much
Colleague, on my new Z10 has not yet been activated the battery. I did everything you did on your video, but the charger is still green, meaning it is not charging. Do you have another suggestion ???
Do you have resolved the problem? I just open my chrismas present today and i have the same problem is not working it still green and it dorsnt change to red to start charging
@@TheBlessedLifetv hey man, did yo uget it going somehow or ?
This is not working =//any other solution?
hi guys, it immediately presents a problem unfortunately ... if I press the start button, it does not turn on. If I connect it to load it, the LED changes from green to red and does not seem to load anything. 😔
Here's it in English copied from euc forum
1 disconnect the battery power connectors, ie two yellow connectors.
2. disconnect the charging connectoor, the white one. Then reconnect it.
3. Press power button for 30 seconds.
4. plugging in the charger to the charging port.
5. the charger's light blinks red and green alternatively.
6. after 10 minutes, the charger light will turn to red, charging is going on now. The battery is activated .
The video stops here. I think you just let it charge up to green, then reconnect the yellow connectors. put the cover back. Done.
observation to the instruction: power on to the charger first before plug it to the charging port.