www.ebay.co.uk/itm/385275019149?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=pf--3a83twk&sssrc=4429486&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY Do you mean this one?
Nope it didn’t leak as it was a very tight fit over the ridge. However just for extra peace of mind to prevent it blowing off I did put an extra clamp on before the ridge as well.
Hi, i have a pre lci 535d, i have a slight oil leak from the intercooler pipe on the passenger side of the car. The leak is at the bottom, i have the oem pipe with metal clip connected to the intercooler and it is leaking from there, where could i get a long enough silicone hose to go onto the intercooler without the metal clip? Also my intercooler the connection isn't on the side like yours but on the main part
It will probably be the o-ring that needs replacing which is causing the leak. This will be more cost effective. www.ebay.co.uk/itm/363747545995?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=o87a0f3ttpw&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY www.ebay.co.uk/itm/255388086410?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=oPYZvqhWQrC&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
It will probably be the o-ring that needs replacing which is causing the leak. This will be more cost effective. www.ebay.co.uk/itm/363747545995?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=o87a0f3ttpw&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY www.ebay.co.uk/itm/255388086410?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=oPYZvqhWQrC&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
I have changed both pipe and o ring still it leaks, is there a longer silicone hose that will fit over the intercooler connector then just use a mikalor clip
@@21eesa ok since it is leaking past the new seal. More than likely your rocker cover gasket needs replacing. What’s happening is a leaky/old rocker cover gasket is causing excess crank gas pressure. Which in turn is blowing oil into your turbo air induction pipe. This then blows into your intercooler pipes and intercooler. I am sure your intercooler is filled with crank vapour oil. The pressurisation of crank gas will lead to crank seals at front and rear of engine failing and you will get oil leaks from there too.
Old OEM pipes has gone really soft, so did not want to risk them rupturing under high boost. OEM pipes were really expensive so I went thick high quality silicone.
Great vid thanks for upload very useful for me ordering pipes
great video, would you be able to send me links to all the pipes and joiners or is that too much hassle
If you click on the description and then click on more and then click more again you can see the pipes I have used. Links are still working.
legend. thank you
how much mm is the elbow that goes in to the turbo pipe? 57mm or 51?
It’s from 57mm at the turbo then reducing to 51mm to the alloy straight pipe
How do you take out old hoses, you dismantle them before?
Yes you have saw off the metal clips
I'm a bit late to the party, but do you have the part number for that gasket where the chargepipe mounts to the turbo outlet flange?
www.ebay.co.uk/itm/385275019149?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=pf--3a83twk&sssrc=4429486&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
Do you mean this one?
Did it leak boost clamping over the quick realese ?
Nope it didn’t leak as it was a very tight fit over the ridge. However just for extra peace of mind to prevent it blowing off I did put an extra clamp on before the ridge as well.
Hi, i have a pre lci 535d, i have a slight oil leak from the intercooler pipe on the passenger side of the car. The leak is at the bottom, i have the oem pipe with metal clip connected to the intercooler and it is leaking from there, where could i get a long enough silicone hose to go onto the intercooler without the metal clip?
Also my intercooler the connection isn't on the side like yours but on the main part
It will probably be the o-ring that needs replacing which is causing the leak. This will be more cost effective.
www.ebay.co.uk/itm/363747545995?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=o87a0f3ttpw&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
www.ebay.co.uk/itm/255388086410?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=oPYZvqhWQrC&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
It will probably be the o-ring that needs replacing which is causing the leak. This will be more cost effective.
www.ebay.co.uk/itm/363747545995?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=o87a0f3ttpw&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
www.ebay.co.uk/itm/255388086410?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=oPYZvqhWQrC&sssrc=2349624&ssuid=wj0PI2P9Sce&var=&widget_ver=artemis&media=COPY
I have changed both pipe and o ring still it leaks, is there a longer silicone hose that will fit over the intercooler connector then just use a mikalor clip
@@21eesa ok since it is leaking past the new seal. More than likely your rocker cover gasket needs replacing. What’s happening is a leaky/old rocker cover gasket is causing excess crank gas pressure. Which in turn is blowing oil into your turbo air induction pipe. This then blows into your intercooler pipes and intercooler. I am sure your intercooler is filled with crank vapour oil. The pressurisation of crank gas will lead to crank seals at front and rear of engine failing and you will get oil leaks from there too.
@@Jrk450 thanks for your reply, how much am i looking at for this on a 535d and where would you recommend to go, I'm in bham.
Just made me realize, I don't really want to do this....Thanks
It’s a bit of a pain 😂
🤣😂🤣🤣
Next time mate use hot water for pips 👍
Bonjour dit moi de quelle dimension échangeur sa dépend le gros échangeur sa pouse fort 30 pour cent 👍🏼
Intercooler has 2.25” inlet/outlet . Or 57mm inlet/outlet. Intercooler in this video 550x180x65mm core.
Why dis you that changes?
Old OEM pipes has gone really soft, so did not want to risk them rupturing under high boost. OEM pipes were really expensive so I went thick high quality silicone.
@@Jrk450 helped me a lot ; I’m gonna do same on X5