Fully agree the best I have found on TH-cam. Would be great if you have a description with sizes and a kind of drawing. I am just a beginner and don't have much tools. Thanks for sharing. Cheers from the Netherlands. Hope you provide all the viewers with a description and drawing
Clean and simple. Minimum of tools necessary. Easy to figure out dimensions for myself. I would countersink the hinges and maybe add a nylon pad and handles.
Props to those who don't use jigs, I know I need one. I'm very good with my hands but getting good symmetry on the belt sander isn't as easy as the pro make it look. This is a great diy jig, I wanted to make a new one and and seeing how well yours came out I'll have to make one similar 👍
Love the design...and easy to put together with minimal specialty tools. Nothing worse than looking at a how to video and its starts off. Lets head to my metal fabrication shop. LOL
плавной регулировки изменения угла нет!а это уменьшает свободу действий на приспособе!!! обязательно делайте с винтом и контр гайкой!!! за изделие и работу ,респект!!!
I am very much estatic to get started in this trade and make my own blades one day and this is gonna save me so much time n ensure my products are what I want to look like. That being said, i am not well enough to have a big proper drill like this. Can an impact driver achieve the same job at getting through the steel block with the right bit n oil?
Один из не многих, кто пользуется нормально заточеными сверлами. Душа прям радуется, а то смотришь тупое сверло, масло льют чтобы не свистело... красавчик👍
Christopher Reedy that is a fancy jig. it is ferrari of jigs. all you need is a L shape and two nuts and bolts on one side to set the angel. this was very nice but i never spend time to make this. L shape and two bolts will do.
What a great job! I would like to be able to replicate it. By any chance would you have a plan with the measurements and distances of the set or could you provide me with them? From already thank you very much. Greetings from Argentina!.
Wish I watched this earlier, would made the build of mine less try and error ...but in the end it looks very similar to urs.....I just added a horizontal screw to adjust the bevel more reproductable.... Ur using cubitron 2 grinding belt? I love this belt, grinds so well and makes such an beautiful grindig Face..
I can do this by hand on my belt grinder, but what about the other side? And what makes it run parallel to the belt at all times? Video please. I need to upgrade mine.
I'm trying to understand your question. Obviously for the other side you just flip the blade around. What do you mean parallel to the belt? The blade edge is perpendicular to the belt, and the edge profile is offset at an angle from parallel.
Seeing as how that was aluminum plate you were tapping.....you could have put your tap in the drill and run it on slow speed. I have done it plenty of times.
Best Jig design I have ever seen. As well as best tutorial. Detailed and straight to the point
Beautiful job on bevel device.
No music: Thank You.
No talk: Thank You
Great video.
Thank you for sharing your expertise. 👍👍👍
Best design and execution I've seen for a knife-making jig. Great work.
Very nice! Probably the cleanest diy jig I’ve seen. Fact that it can be easily made with simple tools makes it that much better. Outstanding!
Fully agree the best I have found on TH-cam. Would be great if you have a description with sizes and a kind of drawing. I am just a beginner and don't have much tools. Thanks for sharing. Cheers from the Netherlands. Hope you provide all the viewers with a description and drawing
Finally a design that doesn’t require welding!! Thank you
Man up! Learn to weld...
Cody Daniel It is really handy to know how to do!
Love this build. Made my own today and it works great. Thanks for posting!!
This is awesome! More sophisticated than the one I’ve been using for sure! Solid
This is definitely on my project list. Right after I finish refurbishing my lathe so I can build myself a 2x72 belt grinder...
Clean and simple. Minimum of tools necessary. Easy to figure out dimensions for myself. I would countersink the hinges and maybe add a nylon pad and handles.
Всё просто и красиво😊только при сверлении держать заготовку пальцами не серьёзно,можно и травму получить,берегите руки,они у вас золотые👍👍👍
You never cease to amaze me with your great ideas! You a big help to beginners.
This is the best I've seen on TH-cam. Thanks man for you masterpiece!!!
Спасибо, это то, что я искал. Все просто и удобно! Лайк и подписка. Привет из России Пермский край
Finally a video showing a jig used to make a small blade, Scandinavian grind! Brilliant (and no welding!!!)
Nice piece of kit and very well built. Thanks for sharing.
Props to those who don't use jigs, I know I need one. I'm very good with my hands but getting good symmetry on the belt sander isn't as easy as the pro make it look. This is a great diy jig, I wanted to make a new one and and seeing how well yours came out I'll have to make one similar 👍
Very good idea, also nice that it is aliminium. Very clean and uncluttered, easy to handle. Very nice work
Excellent! The only change I would make is to countersink the holes in the hinges to make the screws flush. Thanks for the vid.
This is by far one of the best bevel jigs I've ever seen. Definitely going to make it!
Pretty badass. I might steal this. I’ll probably build in the clamp, and countersink the hinges also.
Love the design...and easy to put together with minimal specialty tools. Nothing worse than looking at a how to video and its starts off. Lets head to my metal fabrication shop. LOL
Do you have plans with dimensions? I really like this style of jig.
Nice build!!! Thanks for the video
Thanks foto they vídeo.
Great idea....
Grettings from Puebla México!!!!!
Simple and effective, well done man that’s awesome
Excellent. Simple but elegant design.
Very good Idea.
Simple style , easy to make , nice look , perfekt Funktion.
THANKS FOR THAT VIDEO.
плавной регулировки изменения угла нет!а это уменьшает свободу действий на приспособе!!! обязательно делайте с винтом и контр гайкой!!! за изделие и работу ,респект!!!
Very nicely done! I'll buy it! Lol
Will wood be a suitable replacement? I don't exactly have scraps metal lying around
How about showing switching sides??
I am very much estatic to get started in this trade and make my own blades one day and this is gonna save me so much time n ensure my products are what I want to look like. That being said, i am not well enough to have a big proper drill like this. Can an impact driver achieve the same job at getting through the steel block with the right bit n oil?
....интересный и доведенный до ума вариант,спасибо за видео...
Один из не многих, кто пользуется нормально заточеными сверлами. Душа прям радуется, а то смотришь тупое сверло, масло льют чтобы не свистело... красавчик👍
best so far! nice job
This was a good video, but if you could make a set of instructions with sizes and ect... it would be perfect.
Christopher Reedy that is a fancy jig. it is ferrari of jigs. all you need is a L shape and two nuts and bolts on one side to set the angel. this was very nice but i never spend time to make this. L shape and two bolts will do.
@@ravanabrahmarakshas4263 The amount of time and effort you put into projects will be reflected in the quality of your knives.
I think 100x250mm is a good measure for one plate
Great design! Thanks for sharing!
Very nice work! Great job!
That's a real nice job , what type of bandsaw are you using if you don't mind me asking
The very best one I have seen!
Wo hastn die Aluplatten gekauft?
Add instructions and specific materials in the narrative. Great video!
You have endless skills.
Un buen trabajo felicitaciones 👍
Nice work sir 👍
You have opened my eyes!
Great video! You did good work!
Do you think I could have your specs so I could create my own?
Thank you for sharing valuable vdo.Small job ,But great benefit.
💖💖💖👍👍👍💖💖
It seems like making the jig was just as much fun as making the knife.
Why did you bevel the screw holes for the hinge screws?
Thanks!
Very good work!
Can you tell all sizes of this beautiful product?
Looks good, I’m going to give it a try. What kind of sander do you have?
Nice job! Well thought out.
Ahora sí! El primer fresado de valió de nada.
Nice design of the bevel holder. I LIKE IT. What belt grinder you are using ? I mean is it home made or bought from the store ?
Well done, excellent job
Great design I would affix a hard nylon pad to the base and countersink the screws
Неплохо получилось 👏🤝👍!
Hella dope, AVmake!
What a great job! I would like to be able to replicate it. By any chance would you have a plan with the measurements and distances of the set or could you provide me with them? From already thank you very much. Greetings from Argentina!.
How long and wide is that aluminum plate???
Awesome nice creation
Simpel,easy and supercool.
A little bit Alu,some screws a little bit Time wow.
Grind perfect Knives
Top Work.
Make it out of steel and weld it, last longer and will not take very long to make.
very nice, i use a similar jig but yours is much nicer... thanks
Hi bro 👋👋👋good project and good idea 👍👍👍👍
Thank you!
Oh hello, I see you like knives too :D.
What a coincidence. XD
Do you remember me?
Great! I made all of this just using a file. Still turned out great.
Fantastic Neat work.
Awesome job thanks
Aluminium?
I love your videos and everything you make. Please don’t stop making the awesome videos. How much would you want for one? I’d totally buy one.
Thank you very much!
I don't plan on selling these,at least for now.
AVmake I totally understand. If you change your mind, please let me know.
AVmake I’d buy one too!
Bonsoir ! WAAAOOUUU ! PERFECT very good job for knyfes !
Hola. Que espesor de aluminio utilizas? Y que dimensiones tiene aprox?
Exelente terminaciones. Muy buen trabajo.
Всё гениальное, просто. Спасибо.
Would you kindly tell me more about a thickness and size of aluminium pieces?
Ficou muito boa parabéns 👏👏👏🇧🇷
Muy buen trabajo !!!
how many mm aluminum?
iI enjoy your video, i definitly will try to do this artefact.
Do you sell these ?
Wish I watched this earlier, would made the build of mine less try and error ...but in the end it looks very similar to urs.....I just added a horizontal screw to adjust the bevel more reproductable....
Ur using cubitron 2 grinding belt? I love this belt, grinds so well and makes such an beautiful grindig Face..
Great video. Thank you for sharing with us. Can you create video or post drawings for this jig. Thank you
Podias haber ideado algo para sujetar el cuchillo,un par de imanes? Para q no se mueba y no edtorbe la prensilla?
When does the kit come out for sale?
Yes, sell these, AV. I want one.
That sure is a nice jig
Hell yeah good job
Parabéns 👏🏻👏🏻👏🏻🇧🇷👍
Nice👍
Всё гениальное просто.
Great video, thanks for sharing. Nice jig also...
Thanks for the demonstration
how thick is aluminum?
Where's the best place to buy aluminum to make this?
Just a suggestion, show how it's used first, not last. Merry Christmas! BobUK
Maravilha. Ficou perfeito. Parabéns. 👍👍👍👍👍
Do you have one on a file guide too. Please could you do plans for this bevel jig I’m happy to pay for them
I can do this by hand on my belt grinder, but what about the other side? And what makes it run parallel to the belt at all times? Video please. I need to upgrade mine.
I'm trying to understand your question.
Obviously for the other side you just flip the blade around.
What do you mean parallel to the belt?
The blade edge is perpendicular to the belt, and the edge profile is offset at an angle from parallel.
Hola.consulta .que medida tiene de largo .?
Seeing as how that was aluminum plate you were tapping.....you could have put your tap in the drill and run it on slow speed. I have done it plenty of times.
would you share your plan ?
Could you please Provide dimensions on everything? I definitely want to make one of these for my knife making.