ALWAYS ALWAYS ALWAYS REMOVE THE FILL PLUG FIRST!!!! Before you drain...this will save you if you can't get the fill bolt loose and you've drained the pan you're sunk.
Great vid, that old fluid looked pretty dirty and I’d recommend you changing that fluid a second time because there’s a lot of old fluid left in the transmission when you just drain it, like in the torque converted and valve body and transmission cooler. You probably changed about 35% of the transmission fluid but doing another change should get you closer to 60% which should be really good shape
Great Video Man, but another tip that might get you going is removing the pan itself and then changing the filter inside the pan as it will still hold a lot of the old oil so by removing the pan and changing the filter inside you can change about 60% of the oil in the transmission set up, with the method you are now using you will be changing approx ~30% of the old oil, another tip when you change the pan change the gasket as well and when you clean it you will find magnets that should hold old iron particles clean those as well and put them back and you are good to go.
MAKE SURE YOU CAN UNSCREW FILL PLUG FIRST! I just did mine today. Only had exactly 2.0L drain out. Put 3.4L in and the shifting and behavior is So much smoother! It was a little difficult getting that plastic hose fed through the bottom of the car to the top. I also used a 15/16 3/8 short socket instead of a 15/16 wrench.
Great video. I jack up the front of my 2010 LS460 using Rhino ramps and drained 3.7 quarts of ATF; a little more than the 3.4 you mentioned because my car was slanted. I put in 3.8 qt and it shifts better. FYI, car had only 48,700 miles and the tranny had never been serviced. I also cleaned the MAF sensors, and the car ran better and shifts better.
I'm doing my fluid now. Weird thing is only 1.5 qts came out of the pan😮I'm not sure how much to add at this point 🤷🏻♂️ do you know how long that hose is that you used? You said it's 3/8" right? Thanks man..i appreciate your videos .. your 460's pretty nice. You've given me some good ideas
Hey Sam, nice video man, I just got a 07 LS just like yours and it's sitting at 150k, mine is shifting really well, I wanna do the same thing as you did, I have a few questions: Was it the first time your ATF was changed? and how many miles did it have when you changed the fluid? Did you do more ATF changes after this one? Really nice car brother!
Hey man, I changed it around 180,000 miles and this was the only time I have ever changed it in the car lifetime. The only reason I did is because it lost ATF when I changed the radiator. Lexus recommends you do not change it past 140,000 miles I believe. Definitely don’t quote me on that but it’s a steel transmission so it does not technically need to be changed. Good luck, let me know how you make out.
What is the best trans fluid to use on this vehicle, and where can I find? Thanks for all the amazing content! This question is for anyone that can help please.
@@walkingbyfaith77Just keep an eye on Toyota ATF WS, AISIN WARNER AW-1, ATF AW-1 OE norm. Here in Europe I've found a FEBI oil brand number 101161. It costs around $40 for 5 quarts over here. Hope this helps.
about to do this on my 09 IS250 2 quarts come out so imma just put 2 in and hope its good is checking the level necessary even when you know the exact amount that came out?
So I have a really thin PVC pipe that fit inside of the 3/8 tube. I stuck the PVC pipe down through the top of the engine next to the fuel lines until I saw it coming out the bottom which said the line and the rest of the way through
Hey man, I love your videos. Just a quick tip for the transmission fluid change/flush lexus have a special way to check for the transmission fluid level after changing Turn on the car and start shifting the gears from P R N D M ONCE IT GOT WARM UP YOU CAN EITHER USE OBD 2 SCANNER OR A LASER GUN TEMPERATURE TO CHECK THE TRANSMISSION TEMPERATURE IT SHOULD BE BETWEEN 95f 108f THAN OPEN THE BOLT THERE IS BOLT UNSCREW IT AND THE EXTRA AMOUNT WILL COME OUT.
How many miles do you have ? This will be my 2nd time servicing it. It developed a vibration at super low speeds and I’ve been told to change the fluid in the pan so I’m going to go for it, but I’m at 208k.
OP did you ever check the level properly? I'm not sure it's a good idea to just guess at how much to put in and trust you did it right. Also you already know you need exhaust system work, unfortunately, patching merely delays the real fix but gotta do what you must, that isn't even my question, which is, I thought our LS460's came from the factory with stainless steel exhaust! Either that's a lie or else somebody has replaced your exhaust system previously -
Not too sure what this comes with stock, but I have a full aftermarket exhaust. After speaking with Lexus technicians, they assured me that the transmission level would be fine from what was removed versus what was placed in. The individual I spoke with had been working on these cars for 15+ years and this was protocol for him. Thanks for your comment.😁
Drain and fill, not fluid replacement, and didn't even check the level afterwards? This is not at all how it should be done. Maybe I should film when I do mine after all
Hey i have a 2008 Lexus LS460 Black with yellow calipers custom exhaust tips ducktail spoiler like urs we have almost identical cars a collab and some pictures would be cool
I’m bout to change my trans fluid out too.. is there any word on how black or discolored is too much. Obviously, you shouldn’t have metal flakes in your shit.
ALWAYS ALWAYS ALWAYS REMOVE THE FILL PLUG FIRST!!!! Before you drain...this will save you if you can't get the fill bolt loose and you've drained the pan you're sunk.
Great vid, that old fluid looked pretty dirty and I’d recommend you changing that fluid a second time because there’s a lot of old fluid left in the transmission when you just drain it, like in the torque converted and valve body and transmission cooler. You probably changed about 35% of the transmission fluid but doing another change should get you closer to 60% which should be really good shape
Thanks for the tip!
Great Video Man, but another tip that might get you going is removing the pan itself and then changing the filter inside the pan as it will still hold a lot of the old oil so by removing the pan and changing the filter inside you can change about 60% of the oil in the transmission set up, with the method you are now using you will be changing approx ~30% of the old oil,
another tip when you change the pan change the gasket as well and when you clean it you will find magnets that should hold old iron particles clean those as well and put them back and you are good to go.
MAKE SURE YOU CAN UNSCREW FILL PLUG FIRST! I just did mine today. Only had exactly 2.0L drain out. Put 3.4L in and the shifting and behavior is So much smoother! It was a little difficult getting that plastic hose fed through the bottom of the car to the top. I also used a 15/16 3/8 short socket instead of a 15/16 wrench.
Love how much your car makes you smile
Thank you for all your LS videos! I’m glad this job worked out just as planned! I’ve been contemplating on doing my Trans fluid change also
Most definitely! I would give it a shot if I were you!
Great video. I jack up the front of my 2010 LS460 using Rhino ramps and drained 3.7 quarts of ATF; a little more than the 3.4 you mentioned because my car was slanted. I put in 3.8 qt and it shifts better. FYI, car had only 48,700 miles and the tranny had never been serviced. I also cleaned the MAF sensors, and the car ran better and shifts better.
I love your whiteboard diagram. 10/10 artist
I looked it up, the 2.5 qts is the right amount that was supposed to come out and then you put 2.5 qt in accordance with the maintenance manual
3:15 Wow! That's the drain plug??? Shit I may try it myself 😂😂😂
How I get rid off parking brake see work shop light ? Have brake fluid in the reservoir tank ! Thanks !
Why didn’t you replace the transmission filter?
I'm doing my fluid now. Weird thing is only 1.5 qts came out of the pan😮I'm not sure how much to add at this point 🤷🏻♂️
do you know how long that hose is that you used? You said it's 3/8" right?
Thanks man..i appreciate your videos .. your 460's pretty nice. You've given me some good ideas
Interesting, the hose I used was 3 1/2 feet long
Thank you for sharing loved it
Hey Sam, nice video man, I just got a 07 LS just like yours and it's sitting at 150k, mine is shifting really well, I wanna do the same thing as you did, I have a few questions: Was it the first time your ATF was changed? and how many miles did it have when you changed the fluid? Did you do more ATF changes after this one?
Really nice car brother!
Hey man, I changed it around 180,000 miles and this was the only time I have ever changed it in the car lifetime. The only reason I did is because it lost ATF when I changed the radiator. Lexus recommends you do not change it past 140,000 miles I believe. Definitely don’t quote me on that but it’s a steel transmission so it does not technically need to be changed. Good luck, let me know how you make out.
Thanks for video really helps a lot about to do this, do you have a link for the 15/16 wrench you used? Thanks
I do not, picked it up at a flea market
I better get some credit for helping you shop 👀
Replace the cats now or you got a vid on that too?
What is the best trans fluid to use on this vehicle, and where can I find? Thanks for all the amazing content! This question is for anyone that can help please.
Hey man, just go to the Lexus dealership and they will provide you with Lexus transmission fluid. That’s what I used.
@@Sam_Dunn yea the only shitty thing is, the closest one to me is an hour away so I wanted to see the exact type and try and order online.
@@walkingbyfaith77Just keep an eye on Toyota ATF WS, AISIN WARNER AW-1, ATF AW-1 OE norm. Here in Europe I've found a FEBI oil brand number 101161. It costs around $40 for 5 quarts over here. Hope this helps.
Besides the factory ATF, you can use Liqui Molly 1800 ATF.
What type of transmission fluid did you use
about to do this on my 09 IS250 2 quarts come out so imma just put 2 in and hope its good is checking the level necessary even when you know the exact amount that came out?
That is my understanding!
Hey How did you get the 3/8s tube to the transmission Fill? Start from the top or bottom
So I have a really thin PVC pipe that fit inside of the 3/8 tube. I stuck the PVC pipe down through the top of the engine next to the fuel lines until I saw it coming out the bottom which said the line and the rest of the way through
@@Sam_Dunn Thanks!
Hey man, I love your videos. Just a quick tip for the transmission fluid change/flush lexus have a special way to check for the transmission fluid level after changing
Turn on the car and start shifting the gears from P R N D M ONCE IT GOT WARM UP YOU CAN EITHER USE OBD 2 SCANNER OR A LASER GUN TEMPERATURE TO CHECK THE TRANSMISSION TEMPERATURE IT SHOULD BE BETWEEN 95f 108f THAN OPEN THE BOLT THERE IS BOLT UNSCREW IT AND THE EXTRA AMOUNT WILL COME OUT.
Thanks so much for your support! I appreciate your advice!!
@@Sam_Dunn I'm glad it could help
🙂
@@zaki0078Let it warm up and then open that fill plug he showed? While running in idle?
How many miles do you have ? This will be my 2nd time servicing it. It developed a vibration at super low speeds and I’ve been told to change the fluid in the pan so I’m going to go for it, but I’m at 208k.
I have 183000
Did you change your fluid and did it help the vibration?
Yeah I just changed mine due to low speed vibration. Do your vibration go away?
i thought u had to have a scanner hooked up to check the transmission level
As of now the car is working great!
OP did you ever check the level properly? I'm not sure it's a good idea to just guess at how much to put in and trust you did it right.
Also you already know you need exhaust system work, unfortunately, patching merely delays the real fix but gotta do what you must, that isn't even my question, which is, I thought our LS460's came from the factory with stainless steel exhaust! Either that's a lie or else somebody has replaced your exhaust system previously -
Not too sure what this comes with stock, but I have a full aftermarket exhaust.
After speaking with Lexus technicians, they assured me that the transmission level would be fine from what was removed versus what was placed in. The individual I spoke with had been working on these cars for 15+ years and this was protocol for him. Thanks for your comment.😁
The Toyota WS is last century fluid, pure mineral fluid. There are better out there...full synthetic or Amsoil.
Drain and fill, not fluid replacement, and didn't even check the level afterwards? This is not at all how it should be done. Maybe I should film when I do mine after all
Go for it! Maybe you will learn something aswell🤔🤔
Great video thanks
In fact it’s so easy that you don’t have to do anything. It’s LIFETIME FLUID.
Explain
Good video
Hey i have a 2008 Lexus LS460 Black with yellow calipers custom exhaust tips ducktail spoiler like urs we have almost identical cars a collab and some pictures would be cool
Wow it would! Let’s get in touch! Do you have instagram? If so message me SamDunn_.
I’m bout to change my trans fluid out too.. is there any word on how black or discolored is too much. Obviously, you shouldn’t have metal flakes in your shit.
Why you make that face at 7:17
Hahah I don’t know! 😂 was thinking the same thing while editing!
LS430*