You absolutely do not need to replace the head every six months. Realistically, you can get a couple of years out of it. I have very thick, very dense stubble, and I have to shave twice per day, at a minimum. The head cuts fine after years of use. I’m fact, when I finally replace it, the difference is almost indiscernible.
Their replacement heads suck. I got 3 in a row that broke within 3 months. I even waited a year and a half before buying the third hoping they would have fixed the problem.
@@SketchesofChina Aren’t the replaces the same that come with the shaver? I was thinking on making a huge investment on this but your comment is throwing me of.
Do NOT use the cleaning station only once a month, and DO NOT wait until the solution is as filthy as in this video before you replace it. I use my cleaning station after two or three shaves. The blades work better that way. You can also make your own cleaning solution with isopropol alcohol, maybe mixed with some distilled water, and essential oils (6-8 drops per filling of container). Works fine, at a tiny fraction of the cost of the refills from Braun.
FYI, dont fill the cartridge with water, You can buy large bottles of the refill cleaner and refill it that way (Will save a TON of money!!!). Just make sure you clean out all the cut hairs first. There are several videos that explain how to do it.
Hey Man! That's great feedback. I definitely won't be filling them with water again after my last experience. LOL. I'll look at just getting the solution refill. That's solid advice. Thank you.
Hey there. Thanks for the feedback. You're right, i never considered the evaporation factor of the fluid. I wonder if the "timer" on the charging base the prompts you to change out the solution is based on "# of uses" or evaporation factor?
Everyday is really excessive. I MIGHT use it once a week. I take it out of the station and put the cap back on. I usually get about 4 months use out of 1 unit before I need to change it. Of course, if money is no object then by all means use it as much as you want.
Yep, I have a cleaning station for my 7 Series Braun. I clean after every shave. I simply knock the excess hairs out and then use the station to clean and lubricate. I’ve found that using the unit does not really compromise the life of the solution that much. Replacements aren’t that expensive relatively speaking - besides you’ve bought a premium razor so it might as well be used in a premium way.
You should use the cleaner more often since it cleans and lubricates. That lubrication helps keep the razor head lasting longer. I would suggest using the cleaner at least once a week. Thanks for sharing the video. 😎👍
I remember using 90 % alchol mixed with something (i think lemon extract) for replacing the solution years ago. I forgot exactly what the mixture was. It's purpose is to disinfect, clean and also lubricate.
I have found that the cleaning solution can be topped off or in a pinch replaced with Williams Lectric shave. It is alcohol based, cleans well and doesn’t give off any foul odors
I have always had Norelco shavers, and these are more expensive. I don’t regret spending the extra money though. It is well worth it, and the cleaning station makes all the difference in the world.
1.Use the cleaning station EVERY TIME you've finished shaving. 2. Do not use the brush on the foil. You risk damaging the foil. 3. The foil should be replaced every 18 months approximately. 4. Don't fill the cartridge with anything other than the recommended solution. I got all this by READING THE INSTRUCTIONS.
Hey man don't you think that braun tell you in the instructions to clean the shaver every day and only use their cleaning solution is so they make more money from telling users to do this and the cleaning solution will not extend the life of the foil head that's dependent on how often you shave,
@@nickevans3190 I get what you mean, but for me it’s more peace of mind knowing I’m using what the manufacturer made for the intended machine. 6 cartridges for £25 Uk. Seems a pretty good price for not using a home made solution or DIY and I could damage the machine
Yes, absolutely. I clean my Brown once a week. After cleaning process I remove container and press the cover. One container serves this way about three months.
I've only had my Series 9 for about a month and a half and the "replace foil" light is already coming on.. Has anyone else experienced this? I'm wondering if I just pressed too hard when shaving. I haven't dropped the razor or anything else that might have caused damage.
Thanks for the feedback. No skin irritation back of neck when shaving head. However, I found that the back of my neck hairs were too fine for the razor and didn't do a good job. So I would use regular shaving cream and a blade to get the back neck hairs.
When you use the cleaning station and the cleaning/drying cycle is done, if you take the shaver out and feel the shaving head with your hand, is it wet? I recently bought a Series 9 Pro and this is happening to me. The shaving head smells alcoholy like the cleaning solution, so I'm wondering if the drying cycle is not functioning properly? Is it supposed to be completely dry?
Mine is wet too but the Panasonic cleaning station totally dries a panasonic shaver , but Bruan just doesn't care. It would be great if it works , and it would also be great if Bruan allowed us to simply turn on the drying cleaning mode, so that those of us who use it once a week and use the tap in between could just dry clean only.I hate the scent of the cleaning solution, especially in the tash area, as it enters my nose the smell more . I suppose I could make my own solution and refill the cartridge .
If you use a cleaning station, the liquid here contains all necessary ingredients, includung oil for lubrication. I clean my Brown once a week, on Sundays. That`s absolutely enought to maintain it in good condition.
Looks like a solid shaver. Rough deal on the water. I am curious if after running the shaver trough the proper cleaning solution, if the smell goes away.
Hi there, you don't even need to use the air blower, i currently use the provided cleaning brush to clean out the cartridge. As someone mentioned, once you open the liquid, the alcohol will evaporate, so you might as well use it.
I rinse my cutting head out under hot running water every time I use it & let it air dry after gently bouncing it on a dry hand towel. I only use the cleaning station when it needs to be recharged, which is typically every 5 weeks or so. After charging it in the cleaning station I replace the cap on the tank to help seal it and reduce the evaporation of the solution. This way I can normally get 6 months out of each Clean & Renew cartridge. I do occasionally use compressed air to clean the head & razor also. I just added a new Series 9 Pro head (94M) to my wish list on Amazon after reading reviews about how much better it shaves than with the original 92S head. The original head lasted about 15-16 months and my Braun is a little over 2 years old so it will soon be time to replace the head again.
I bought the Braun S9 Pro a couple of months ago. Loved the shaving experience. However after each shave it indicated the water drops to clean it in the station. No matter how much I clean it, the water drop only disappears after I use the cleaning station. Exchanged it to a new one because the shop said it must be faulty. The new one 1st shave out of the box for the same. And then after the clean I shaved in 2 days. Again the same result. No matter how much I clean it, the indicator only goes away after cleaning in the station. Is this normal? I sadly returned the 2nd unit and got the money back. But really loved the shaver. Want to clarify this. So I can buy this again.
Thanks for sharing your experience. I'm going to check out my experience to see if I run into the same issue. I wonder it's a default setting where the indicator just tells you to clean it. I'm on the road and don't have the base with me, however, I'll provide an update when I get home.
Can anybody tell me when does foil replacement symbol show? I’m using 9pro an wondering when I’m supposed to see it, when power on an it stays on or flashes? Cheers
HI there. What you're referring to is not the power switch. It's the switch to lock the shaving head to be in one place or to allow it to bend and contour to your face as you shave. Hope that helps.
Does the charging station stop charging on its own once the razor is fully charged so I can just leave it on the stand without worrying about the battery?
I don't get it... I have a series eight, and it does nothing for me... In every video I see, though, the Braun top shavers do excellently. I wonder what I am doing wrong. Maybe there is something wrong with my machine. It looks fine.
Man that story about the mildew in the car... Sounds like something that would happen to me! Thanks so much for sharing it was helpful as well as entertaining. 😄 I read the comments about evaporation. I will keep that in mind. I wonder where you get this refill solution people are taking about.
@@TheWongReviewer I bought one. I took your advice and the advice of the people commenting. I appreciate the platform you created where I can learn from you and other people. So thanks again for taking the time to do this!
@@meboyotube How do you find it? as a student I want to invest in a very good shaver but I can only make the investment once. I know that is built to last 7 years minimum so is cheaper in the long term than gillette cartridges, (I did the maths as an engineering student) so I want to make the investment but getting the best of the best available now.
For me, it’s close enough that if I run my hands over my face it feels smooth. However, if you look in the mirror, it looks like I still have some stubble.
It's a great shaver but it has a known serious fault with the on/off button sticking in lock mode - it renders the shaver useless. Search and check before you buy
Thanks for the feedback. People don’t realize how long it takes to put up a youtube video and I was completely devastated when i realized the lav mic wasn’t plugged in. I posted it as is and i’m more careful in future videos. Thanks for watching though.
The cleaning solution is just a gimmick and a waste of time and money. I use my vacuum to remove all the micro hairs then run the head and foil (separately) under warm water after each use. The whole process takes less than 2mins, doesn't cost a penny and once dry it's like new every time
People put water in these???? You can put rubbing alcohol in it once but this is still not great especially if it is very filled with stubble. The rubbing alcohol 70% no more, will disinfect and clean. However lubrication will not be great, so don't do this much rather only in a pinch.
@@TheWongReviewer I clean mine every 3 days and it was in the middle of drying when it turned off on its own can that break it whenever that happens my razor was still wet
@jaydoubleu3419 what I do is when I cleaned it in the station I don't leave if in the station I take blade off and leave it to dry on a table .dries in a few hours but bruan doesn't care its cleaning station don't dry .while panasonic cleaning station actually dries a shaver.
@@TheWongReviewer i had to take my razor back and exchange it for a new one and i discovered that the one got back is not meant for the self cleaning thats when i wrote to you before i discovered that info but thank you anyways
Why w;ould you refill the cleaning cartridge with WATER (7:10).... when you first opened it didn't your nose tell you the cartridge is filled with ALCOHOL??
Hi there. I actually don't use any appliance oil on the shaver as maintenance. I never occurred me to lubricate the individual rotating blades. I just ordered replacement heads since I started using it. I'll have to research this some more
If you don't have a cleaning station, you'll need to oil them but if you do have cleaning station the oil is already in the cleaning station's solution. However, If you use cleaning station solutions once a week, dry shave, and only rinse under the tap with water after shaving and nothing else, you can get away with oiling it every two days, but if you wet shave with foam, you will need to oil it every time you finish because foam dries the blade.If you clean it with soap, in the tap it will need to be oiled every time afterwords too Oil is essential because it extends the life of the blade, keeps it cutting smoothly, and prevents it from overheating and Oiling can also reduce skin irritation .Any type of hair clippers oil will do, such as whals hair clippers oil or bruan oil, but never use wd40 or olive oil, which clogs and destroys the shaver. I say this because I've seen some idiots say they use WD40 or olive oil and that is the worst thing someone can do.
I think that's why da BUDDHA recommended weekly baths - and I recommend WITCH HAZEL - or any anti-bacterial wash - in appropriate concentration. Not WATER - bugs love dirty water. Didn't you have a microscope when you were 12? 🙄
Braun is just like the old printer cartridge scam - if you don’t use the cleaner and more importantly buy cleaner supplies - the razor shuts down. If I had that huge Braun cleaning center on the bathroom counter my gal would leave me - why is it mandatory to clean something that’s in the shower everyday - buy your expensive cleaner crap or Braun knows it and razor is worthless like mine.
Thanks for the comments. I'm starting using the Braun and I've actually stopped using the cleaning station. As long as I've clean it weekly, it seems to still work.
Thanks for the feedback. People don’t realize how long it takes to put up a youtube video and I was completely devastated when i realized the lav mic wasn’t plugged in. I posted it as is and i’m more careful in future videos. Thanks for watching though.
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs PSG )](http://i.ytimg.com/vi/zM25REvnJW4/mqdefault.jpg)
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.6 (1/4)](http://i.ytimg.com/vi/m05kZ2GDKXg/mqdefault.jpg)
![Best Electric Shavers 2024 [don’t buy one before watching this]](/img/n.gif)
You absolutely do not need to replace the head every six months. Realistically, you can get a couple of years out of it. I have very thick, very dense stubble, and I have to shave twice per day, at a minimum. The head cuts fine after years of use. I’m fact, when I finally replace it, the difference is almost indiscernible.
Their replacement heads suck. I got 3 in a row that broke within 3 months. I even waited a year and a half before buying the third hoping they would have fixed the problem.
@@SketchesofChina Aren’t the replaces the same that come with the shaver? I was thinking on making a huge investment on this but your comment is throwing me of.
Do NOT use the cleaning station only once a month, and DO NOT wait until the solution is as filthy as in this video before you replace it.
I use my cleaning station after two or three shaves. The blades work better that way.
You can also make your own cleaning solution with isopropol alcohol, maybe mixed with some distilled water, and essential oils (6-8 drops per filling of container). Works fine, at a tiny fraction of the cost of the refills from Braun.
FYI, dont fill the cartridge with water, You can buy large bottles of the refill cleaner and refill it that way (Will save a TON of money!!!). Just make sure you clean out all the cut hairs first. There are several videos that explain how to do it.
Hey Man! That's great feedback. I definitely won't be filling them with water again after my last experience. LOL. I'll look at just getting the solution refill. That's solid advice. Thank you.
Where yup buy the large bottles for the refill cleaner
Any links to appropriate refill water
@@angelf9800 We bought it off of Amazon.
@@braingasim do you have a link or do you the name of it
I use the cleaning station after every shave. The limiting factor is the evaporation of the fluid which is little affected by how often you use it.
Hey there. Thanks for the feedback. You're right, i never considered the evaporation factor of the fluid. I wonder if the "timer" on the charging base the prompts you to change out the solution is based on "# of uses" or evaporation factor?
Everyday is really excessive. I MIGHT use it once a week. I take it out of the station and put the cap back on. I usually get about 4 months use out of 1 unit before I need to change it. Of course, if money is no object then by all means use it as much as you want.
Yep, I have a cleaning station for my 7 Series Braun. I clean after every shave. I simply knock the excess hairs out and then use the station to clean and lubricate. I’ve found that using the unit does not really compromise the life of the solution that much. Replacements aren’t that expensive relatively speaking - besides you’ve bought a premium razor so it might as well be used in a premium way.
@@johnantonioni9654 i have Braun S9 Pro and i use the cleaning once a week 😊
Cleaning it only once a month is far too infrequent. It should be cleaned every time it needs to be charged which is once a week in my case.
You should use the cleaner more often since it cleans and lubricates. That lubrication helps keep the razor head lasting longer.
I would suggest using the cleaner at least once a week.
Thanks for sharing the video. 😎👍
I remember using 90 % alchol mixed with something (i think lemon extract) for replacing the solution years ago. I forgot exactly what the mixture was. It's purpose is to disinfect, clean and also lubricate.
Thanks for the feedback and suggestion. Once i run out of the store bought one, i'll see if I can google a similar recipe for DIY.
Alcohol nor lemon extract lubricates though. You need an oil.
I have found that the cleaning solution can be topped off or in a pinch replaced with Williams Lectric shave. It is alcohol based, cleans well and doesn’t give off any foul odors
Don't worry about the sound quality bro I just bought mine and your review was priceless thanks 👍
There is a timer on the shaver that tells you when you should replace the foil/cutter. When you put on a new foil/cutter, you need to reset the timer.
One of the best electric shavers right here also good for the neck area unlike some other electric shavers
Great. Thanks for the feedback and glad you like it!
@@TheWongReviewer ?!?!?
Thank you for taking the time to answer these questions! Review was helpful. I want one of these but the price kind of scares me...
I have always had Norelco shavers, and these are more expensive. I don’t regret spending the extra money though. It is well worth it, and the cleaning station makes all the difference in the world.
thank you so much for this video!! made it a lot easier to understand
Thanks for the feedback. Glad it was helpful
1.Use the cleaning station EVERY TIME you've finished shaving. 2. Do not use the brush on the foil. You risk damaging the foil. 3. The foil should be replaced every 18 months approximately. 4. Don't fill the cartridge with anything other than the recommended solution.
I got all this by READING THE INSTRUCTIONS.
Hey man don't you think that braun tell you in the instructions to clean the shaver every day and only use their cleaning solution is so they make more money from telling users to do this and the cleaning solution will not extend the life of the foil head that's dependent on how often you shave,
@@nickevans3190 I get what you mean, but for me it’s more peace of mind knowing I’m using what the manufacturer made for the intended machine.
6 cartridges for £25 Uk. Seems a pretty good price for not using a home made solution or DIY and I could damage the machine
@@Mr---mr4ll facts
Good explaination of when to change solution. This is a good shaver however the manual is awful.
Can the solution container be removed and put the cover back on? Would doing so make the solution last longer?
Yes, absolutely. I clean my Brown once a week. After cleaning process I remove container and press the cover. One container serves this way about three months.
Liked the video. Good explaination as to when to change the solution. This is a good shaver with a poor manual.
My Braun smells bad because I did the same thing with water. How do you get rid of the smell ? Buying a new cartridge?
Excellent review I can makeup my mind wether to get this one or the pro model
Thanks! Honestly you don’t really need the cleaning station. it’s cheaper without it
I've only had my Series 9 for about a month and a half and the "replace foil" light is already coming on.. Has anyone else experienced this? I'm wondering if I just pressed too hard when shaving. I haven't dropped the razor or anything else that might have caused damage.
Great information, you made my research easy
Very helpful video. Thanks!
Thanks for your review
Does it edge up beards and can it trim them down too? Or is it just a shaver
Hi thank u for great reviews! 👍🏻 Just wondering if there’s skin irritation back of neck when shaving head?
Thanks for the feedback. No skin irritation back of neck when shaving head. However, I found that the back of my neck hairs were too fine for the razor and didn't do a good job. So I would use regular shaving cream and a blade to get the back neck hairs.
@@TheWongReviewer awesome 🤩
You need to at a few ml of glycerin to ensure the lubricating properties of the solution, essential oil won't make it.
Great job, you answered all my concerns - I'm getting one👌
Thanks for the feedback . Appreciate it
When you use the cleaning station and the cleaning/drying cycle is done, if you take the shaver out and feel the shaving head with your hand, is it wet? I recently bought a Series 9 Pro and this is happening to me. The shaving head smells alcoholy like the cleaning solution, so I'm wondering if the drying cycle is not functioning properly? Is it supposed to be completely dry?
Same on my end. It's still wet after the cleaning cycle. I usually shave at night before bed and run the cleaning cycle. It's dry by my next use.
@@meancheeto Good to know, thank you! I find this odd since then what does the drying supposedly done by the cleaning unit even do?
Mine is wet too but the Panasonic cleaning station totally dries a panasonic shaver , but Bruan just doesn't care. It would be great if it works , and it would also be great if Bruan allowed us to simply turn on the drying cleaning mode, so that those of us who use it once a week and use the tap in between could just dry clean only.I hate the scent of the cleaning solution, especially in the tash area, as it enters my nose the smell more . I suppose I could make my own solution and refill the cartridge .
sir the trimmer stopped working, please advise, as the foil head is working fine
Nice review thinking of getting one Thanks.
My advice is just buy one
Thank you for the video! Do you need to put lubricant/oil after use?
Hi there, I haven't. However, if you have the same cleaning station as I do, the solution has oil in it to lubricate the shaver at the same time.
If you use a cleaning station, the liquid here contains all necessary ingredients, includung oil for lubrication. I clean my Brown once a week, on Sundays. That`s absolutely enought to maintain it in good condition.
Thanks for the video. Such a random question, but what's the song you used in the background?
My low level light comes on my Braun shaver charger, but the refill unit is filled with the cleaner solution. Any ideas what is causing this?
Looks like a solid shaver. Rough deal on the water. I am curious if after running the shaver trough the proper cleaning solution, if the smell goes away.
Thanks for your efforts.
Can I use it on sensitive areas under the armpit and the "more"..
Yes you can. No issues there. However, your armpit hair has to be short for the blade to catch.
How long is the cleaning process supposed to run.?Seems mine was going an easy 10 minutes before I shut it off. Thanks
Can I clean once a week with a simple air blower instead of using the liquid?
Hi there, you don't even need to use the air blower, i currently use the provided cleaning brush to clean out the cartridge. As someone mentioned, once you open the liquid, the alcohol will evaporate, so you might as well use it.
I rinse my cutting head out under hot running water every time I use it & let it air dry after gently bouncing it on a dry hand towel. I only use the cleaning station when it needs to be recharged, which is typically every 5 weeks or so. After charging it in the cleaning station I replace the cap on the tank to help seal it and reduce the evaporation of the solution. This way I can normally get 6 months out of each Clean & Renew cartridge. I do occasionally use compressed air to clean the head & razor also. I just added a new Series 9 Pro head (94M) to my wish list on Amazon after reading reviews about how much better it shaves than with the original 92S head. The original head lasted about 15-16 months and my Braun is a little over 2 years old so it will soon be time to replace the head again.
can't you charge it with the cable of the station, direct in the shaver?@@jonhansen4745
Thanks for the video. question how do you clean inside the top of the base? it gets very dirty in there after cleaning shaver a few times
I bought the Braun S9 Pro a couple of months ago. Loved the shaving experience. However after each shave it indicated the water drops to clean it in the station. No matter how much I clean it, the water drop only disappears after I use the cleaning station. Exchanged it to a new one because the shop said it must be faulty.
The new one 1st shave out of the box for the same. And then after the clean I shaved in 2 days. Again the same result. No matter how much I clean it, the indicator only goes away after cleaning in the station. Is this normal?
I sadly returned the 2nd unit and got the money back. But really loved the shaver. Want to clarify this. So I can buy this again.
Thanks for sharing your experience. I'm going to check out my experience to see if I run into the same issue. I wonder it's a default setting where the indicator just tells you to clean it. I'm on the road and don't have the base with me, however, I'll provide an update when I get home.
Can you use it on your body and legs? With same attachment you had on?
Hi there. Probably. If I can use it to shave my head, you can probably use it for body hair.
Can anybody tell me when does foil replacement symbol show? I’m using 9pro an wondering when I’m supposed to see it, when power on an it stays on or flashes? Cheers
Blue light flashes above power l
Button on 5430 station and motor not shutting down
My power button fell out, and how do I fix it?
What are the two positions for the power switch.
HI there. What you're referring to is not the power switch. It's the switch to lock the shaving head to be in one place or to allow it to bend and contour to your face as you shave. Hope that helps.
Does the charging station stop charging on its own once the razor is fully charged so I can just leave it on the stand without worrying about the battery?
Yes, it turns itself off once it's fully charged!
I don't get it... I have a series eight, and it does nothing for me... In every video I see, though, the Braun top shavers do excellently. I wonder what I am doing wrong. Maybe there is something wrong with my machine. It looks fine.
Is there more than the shaver head that needs replacing regularly?
Hi there. No, just the shaver head
How does it compare to other shavers that you've had?
Man that story about the mildew in the car... Sounds like something that would happen to me! Thanks so much for sharing it was helpful as well as entertaining. 😄
I read the comments about evaporation. I will keep that in mind. I wonder where you get this refill solution people are taking about.
Thanks for the feedback!
@@TheWongReviewer I bought one. I took your advice and the advice of the people commenting. I appreciate the platform you created where I can learn from you and other people. So thanks again for taking the time to do this!
@@meboyotube How do you find it? as a student I want to invest in a very good shaver but I can only make the investment once. I know that is built to last 7 years minimum so is cheaper in the long term than gillette cartridges, (I did the maths as an engineering student) so I want to make the investment but getting the best of the best available now.
How close does it shave?
For me, it’s close enough that if I run my hands over my face it feels smooth. However, if you look in the mirror, it looks like I still have some stubble.
When I put my shaver into the cleaning station it doesn't show any of the 3 water drop lights , does anyone else have this issue ?
does it grab skin if beard is on 5 or 7 days ? My series 8 would always grab skin and it was not smooth .
Hi there. Yes, it will pull on the beard hairs if it's long after 7 days growth. That's the longest I have gone without shaving and I find it pulls
It's a great shaver but it has a known serious fault with the on/off button sticking in lock mode - it renders the shaver useless. Search and check before you buy
whoot it stays stuck? you can not use it anymore then?
Have same problem and it fell out
Poor power button manufacturing
Great sound lol
Where can buy Braun series 9
Can I clean it by my self and not using the other machine because it’s so expensive to refill it often
Hi there. Yeah you can. Take the brush it comes to clean out the cartridge and the razer. Then rinse the cartridge under hot water.
Great review! A microphone would be appreciated :)
Thanks for the feedback. People don’t realize how long it takes to put up a youtube video and I was completely devastated when i realized the lav mic wasn’t plugged in. I posted it as is and i’m more careful in future videos. Thanks for watching though.
The cleaning solution is just a gimmick and a waste of time and money. I use my vacuum to remove all the micro hairs then run the head and foil (separately) under warm water after each use. The whole process takes less than 2mins, doesn't cost a penny and once dry it's like new every time
Hey there ! Great suggestion to use a vacuum to remove the hair. The little brush it comes with doesn't really do the job.
Why do you still manually clean it when there is cleaning station? That seems unnecessary
People put water in these???? You can put rubbing alcohol in it once but this is still not great especially if it is very filled with stubble. The rubbing alcohol 70% no more, will disinfect and clean. However lubrication will not be great, so don't do this much rather only in a pinch.
how long does it take to clean and dry this razor the total time thank you
Hi there. I honestly don't know. I just leave it overnight for it to do the cleaning on the base. it's dry when I use it in the morning.
@@TheWongReviewer I clean mine every 3 days and it was in the middle of drying when it turned off on its own can that break it whenever that happens my razor was still wet
@@jaydoubleu3419 For some strange reason, despite the fan being turned on, this does not dry our shavers for myself or many others.comes out wet
@@trojanx7723 YOU HAVE TO WAIT OVERNIGHT FOR IT TO DRY
@jaydoubleu3419 what I do is when I cleaned it in the station I don't leave if in the station I take blade off and leave it to dry on a table .dries in a few hours but bruan doesn't care its cleaning station don't dry .while panasonic cleaning station actually dries a shaver.
If you really want to get the head clean use your water pix
mine wont stop flashing and beeping in the charger box ? help
Hi there. that's strange. Try cleaning the charging contacts on both the razer and on the charging base to see if that helps.
@@TheWongReviewer i had to take my razor back and exchange it for a new one and i discovered that the one got back is not meant for the self cleaning thats when i wrote to you before i discovered that info
but thank you anyways
Why w;ould you refill the cleaning cartridge with WATER (7:10).... when you first opened it didn't your nose tell you the cartridge is filled with ALCOHOL??
The manual says to clean the shaver after every use and the solution only lasts 8 weeks even without use as the alcohol evaporates.
I read that some people don’t throw away the cap and use the cap in between cleanings to prevent evaporation.
cleaning stations are a gimmick. Just wash it with soapy water. You replace the blade every 1.5 years anyways.
I have question , do you use any appliance oil on the shaving head to keep the shaver in good condition?if yes, how often?
Hi there. I actually don't use any appliance oil on the shaver as maintenance. I never occurred me to lubricate the individual rotating blades. I just ordered replacement heads since I started using it. I'll have to research this some more
If you don't have a cleaning station, you'll need to oil them but if you do have cleaning station the oil is already in the cleaning station's solution. However, If you use cleaning station solutions once a week, dry shave, and only rinse under the tap with water after shaving and nothing else, you can get away with oiling it every two days, but if you wet shave with foam, you will need to oil it every time you finish because foam dries the blade.If you clean it with soap, in the tap it will need to be oiled every time afterwords too Oil is essential because it extends the life of the blade, keeps it cutting smoothly, and prevents it from overheating and Oiling can also reduce skin irritation .Any type of hair clippers oil will do, such as whals hair clippers oil or bruan oil, but never use wd40 or olive oil, which clogs and destroys the shaver. I say this because I've seen some idiots say they use WD40 or olive oil and that is the worst thing someone can do.
You can use cooking oil and then place it in the pan and cook the shaver like an omelette.
What about refilling it with 70% rubbing alcohol?
This shaver its so faster
PLEASE HELP
DOES THE SEAGATE BARRACUDA COMPUTE WORK ON PLAYSTATION 4
I think that's why da BUDDHA recommended weekly baths - and I recommend WITCH HAZEL - or any anti-bacterial wash - in appropriate concentration. Not WATER - bugs love dirty water. Didn't you have a microscope when you were 12?
🙄
Bro do something about your sound
Yup. I messed up while recording. It happens. I apologize for the inconvenience bro
Braun is just like the old printer cartridge scam - if you don’t use the cleaner and more importantly buy cleaner supplies - the razor shuts down. If I had that huge Braun cleaning center on the bathroom counter my gal would leave me - why is it mandatory to clean something that’s in the shower everyday - buy your expensive cleaner crap or Braun knows it and razor is worthless like mine.
Thanks for the comments. I'm starting using the Braun and I've actually stopped using the cleaning station. As long as I've clean it weekly, it seems to still work.
what a bozo...
I’m surprised someone is paying $300 for an electric razor.
I paid for mine on sale. I don't think I would pay full price at $300. However, value of it's worth is up to each person.
you should of redone it, only bc audio sucks with the 4K video thanks anyway no thumbs up for u
Thanks for the feedback. People don’t realize how long it takes to put up a youtube video and I was completely devastated when i realized the lav mic wasn’t plugged in. I posted it as is and i’m more careful in future videos. Thanks for watching though.
Mine all of a sudden got a lock sign on the display! And it stops by itself while using it.Any idea?