Guys this is a fantastic story, not just because the ute will look awesome but mainly because the boys are learning so much and gaining further life skills. The boys seem to do more than the average kid, but they are still remaining grounded. It is a credit to the way you are dragging them up. Your family is an inspiration to a lot of people. Well done and don't change a thing eh. Cracking show.!!!!!
Yes boys! Been following you guys from the moment you cut the mega 6x6 in half before the extension. Now to building your own rigs! Your old boy must be the proudest Dad in Australia, can’t wait to see you both continue to grow and make your dreams a reality. 🤟🏼
Hi Justin - I have to say you coach your boys well! train them and nurture them... that's awesome. I think that's something lot of the new dads can learn from you. Unfortunately those are hidden behind all of the fancy tools and toys.
Ashton, I have been really enjoying watching you and Paul from FabRats building your FJs. Two very different trucks but both so cool. Thanks for sharing your build with us.
I have been too man. I’m glad they brought this series back after months of it being gone. I also enjoy watching the golden nugget build on fabrats too. It’s not FJ cool but it’s still very interesting.
I love watching this cool 4wd FJ49 evolve into the great new meets old such a cool thing to be doing it within the walls of patriot an to have shared this ith your brother an your dad what a dream for every dad to be part of . I hope 1 day i can do this with my boys . A big thank you for sharing thiis bulid with everyone cant wait to see it fully finished 😆😆😆😆
18mins flex test thanks for pointing out a valuable tip for spring ratings and flex! never thought about it like that before .. always went for heavy duty 300kg constant load springs so yeah made sense seeing you explain it like that !
That’s also just Landcruiser things, the stock radius arms lock the front diff to the front of the car, take out 1 radius arm front bolt and it’ll flex the front out.
I think the front leaf springs are probably fine they will break in after you run it down a trail or two , it's looking good can't wait to see it moving under it's own power 👍
It has coil springs in the front. Too many variables to know if the rate is “correct” from behind the phone screen, but what is undeniable, is the inherent roll resistance of Radius Arms. Some are better than others but they basically act like a big anti roll bar.
Love this channel and the support for the boys. Ashton is killing this with his enthusiasm, ability and video commentary. With the front coils not considered to be soft enough, could it be that the rear leaves (chunky as they look) is the issue? I would have thought that the rear being unloaded the rear wheels would lift rather than bottom out on the body on the opposite side. My $0.02
Hi guys love the 49 project I can really appreciate it being a fab guy myself i’ve been doing some modification work on some 79 series 70th anniversary vehicles I have something left over that would really top your project off something you would use every time you drive the vehicle that looks cool if you could send me a postal address I’ll pass it on to you Ashton would love it
Hi guys I have been following the build , have you looked at outing the terrain tamer smart coils in , I think that they would have better Movement for you guys
On the dash front, would the digi dash that Richard (From Mr Landcruiser) fits to 40s not work with the 79 engine? That rear flex Wonky AF like a dog peeing. Awesome.
Patriot Games please keep the mockups for that car because I will be bringing my car to you boys to do a similar thing interior and exterior I haven't seen the final product but what it looks like now is a good thing keep it up your big semi-trailer truck needs to be beefed up Patriot Style can go anywhere on any roads and I any dirt
You boys definitely have to take that build to SEMA, don't paint it and the yanks will go crazy for it, then take it to mohab after that for a vid and youse will get 2m views easy and open up a market in resto mod parts. What a great platform to further expand ur business lines. Really enjoy the whole of family content.
You blokes could really use some parts from Jullene at Summit Machine over in the States. Utah I think..... upper and lower control arms are THE only way to go, nothing better anywhere!
Much less confusing with just one of the twins 😂
Guys this is a fantastic story, not just because the ute will look awesome but mainly because the boys are learning so much and gaining further life skills.
The boys seem to do more than the average kid, but they are still remaining grounded. It is a credit to the way you are dragging them up.
Your family is an inspiration to a lot of people.
Well done and don't change a thing eh.
Cracking show.!!!!!
Yes boys! Been following you guys from the moment you cut the mega 6x6 in half before the extension. Now to building your own rigs! Your old boy must be the proudest Dad in Australia, can’t wait to see you both continue to grow and make your dreams a reality. 🤟🏼
Beautiful!! Once you put 35s on you can't go back. That beauty was made for 35s. Good job Ashton and all.
Really appreciate the CAD & Design work that have gone into this. Well done to everyone involved!
Great to see his excitement in the trade and such a great family to get him started.
Love this build been here since the start
Hi Justin - I have to say you coach your boys well! train them and nurture them... that's awesome. I think that's something lot of the new dads can learn from you. Unfortunately those are hidden behind all of the fancy tools and toys.
It’s been pretty cool watching the boys grow up through this channel. They’re absolutely slaying it at life. Parenting done right 👊🏼
Thanks Legend 🤙🏽
Ashton, I have been really enjoying watching you and Paul from FabRats building your FJs. Two very different trucks but both so cool. Thanks for sharing your build with us.
I have been too man. I’m glad they brought this series back after months of it being gone. I also enjoy watching the golden nugget build on fabrats too. It’s not FJ cool but it’s still very interesting.
This is going to be a bad ass fj
When done it would be great to see these guys and Fab Rats 45 go head to head on a course.
Looking awesome guys👌👌👌
Congrats Ashton on your accomplishments love you all.
Aston you need to keep the 35 inch tyres on the FJ49 it looks soooo good
Another one of a kind cruiser again in the 4wd game. Good on you boys! 🤙
I love watching this cool 4wd FJ49 evolve into the great new meets old such a cool thing to be doing it within the walls of patriot an to have shared this ith your brother an your dad what a dream for every dad to be part of . I hope 1 day i can do this with my boys . A big thank you for sharing thiis bulid with everyone cant wait to see it fully finished 😆😆😆😆
The vidéo i was waiting for ✌️thank you
18mins flex test thanks for pointing out a valuable tip for spring ratings and flex! never thought about it like that before .. always went for heavy duty 300kg constant load springs so yeah made sense seeing you explain it like that !
Great instrument cluster! Cant wait for first drive and start
Great job folks!👊🤙
Awesome video guys cannot wait to see the next video tomorrow hopefully
I’m very jealous!! Such a nice build and the boys are killing it
Such a cool build! I went from 36inch to 40inch on my 1965 Unimog. Such a big difference!
I cannot wait to see this build off-road ❤️
So cool 😎 love it fellas 👍👍
Huge fan
It really does look like it's going to be a weapon off road I can't wait to see it
That’s also just Landcruiser things, the stock radius arms lock the front diff to the front of the car, take out 1 radius arm front bolt and it’ll flex the front out.
I think the front leaf springs are probably fine they will break in after you run it down a trail or two , it's looking good can't wait to see it moving under it's own power 👍
It has coil springs in the front. Too many variables to know if the rate is “correct” from behind the phone screen, but what is undeniable, is the inherent roll resistance of Radius Arms. Some are better than others but they basically act like a big anti roll bar.
SR20 catch a cold? Lol 😆 looks good lads keep up the good work
Love this channel and the support for the boys. Ashton is killing this with his enthusiasm, ability and video commentary. With the front coils not considered to be soft enough, could it be that the rear leaves (chunky as they look) is the issue? I would have thought that the rear being unloaded the rear wheels would lift rather than bottom out on the body on the opposite side. My $0.02
Nice work 💪👍
Hell yeah patriot! I’m getting ready for a road trip to cape trib love from Adelaide!
Yes lads
Loooooooooooooooooooks 👍
what is going on down there in the comments!! Love the DDE music at the start awesome stuff again Patriot
Yewww yea the patriot team
Maybe some usb outlets in the center console would be nice for your ipad, phone etc
And what your doing is perfect! This will end up as a FJ49 BEAST!
Can’t wait for the 200sx to get some engine work and more drifting
Hi guys love the 49 project I can really appreciate it being a fab guy myself i’ve been doing some modification work on some 79 series 70th anniversary vehicles I have something left over that would really top your project off something you would use every time you drive the vehicle that looks cool if you could send me a postal address I’ll pass it on to you Ashton would love it
🤙
Soo good
Wish I could afford this on mine🤣
Marvelous :O
So gooood 🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌
Great work guys , that FJ is just shit hot 🥵
You might need to fit a set of super flex front control arms, the factory arms have limited flex
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
I really want one
the 35's look mad as
Yeah the boys sweet video love everyone
Hi guys I have been following the build , have you looked at outing the terrain tamer smart coils in , I think that they would have better Movement for you guys
About time jeez been waiting 🤣🤣👏🏾👏🏾
You should get the interior powder coted
On the dash front, would the digi dash that Richard (From Mr Landcruiser) fits to 40s not work with the 79 engine?
That rear flex Wonky AF like a dog peeing. Awesome.
Go 4inch coils bro fuck it haha! Thing mean! That’s my dream build right there!
Patriot Games please keep the mockups for that car because I will be bringing my car to you boys to do a similar thing interior and exterior I haven't seen the final product but what it looks like now is a good thing keep it up your big semi-trailer truck needs to be beefed up Patriot Style can go anywhere on any roads and I any dirt
Hard to tell but is the front anti roll bar connected? Personally I’d get rid of it all together. The Radius Arms are restricting roll as it is.
Looks like a @RigSketch drawing 17:21
How do you get away with extended shackles? I have in mine and just curious
Looking good, interior would look mad if it were hydro dipped carbon
Coming together well…
❤️❤️❤️
Yeah
I’d put the aircon switches and controls where the choke and original switches.
You boys definitely have to take that build to SEMA, don't paint it and the yanks will go crazy for it, then take it to mohab after that for a vid and youse will get 2m views easy and open up a market in resto mod parts. What a great platform to further expand ur business lines. Really enjoy the whole of family content.
🤙
Love the vids
Sweet as.... Doing good boy's
Please tell me you have saved all these CAD files so the public can buy and build a similar rig
You would’ve added 100hp to the black truck going down to 31s. Go out the back and use those horses 💨 💨 💨
First comment awesome as ❤️👍
Uppaa
Wish my 45 looked like this 😂😂
Imagine Police pull over the Sylvia and told Justin to grow up.
Ok the 49 needs the 35s on
When u 1st cad your whole rig, do same to the silvia cad it all make auzzi jdm parts,
How on earth is that going to be legal and can you get it done on the Patrol too.....
You blokes could really use some parts from Jullene at Summit Machine over in the States. Utah I think..... upper and lower control arms are THE only way to go, nothing better anywhere!
Really needs a hzj79 front diff. Vdj is way to wide
Haha im early here.
Please don’t paint it