You always got to adjust the chain after it heats up it will stretch and I've seen even a brand new song you might have to adjust the carburetor mixture not necessarily the idle speed
I have the same exact saw you have to break it in first and it will have little more power.after one gallon mines did a little better but what anyone expect for 100 bucks.
This is not a Stihl Clone it is a Zenoah Clone saw, model 5200 or a model 4500. The top cover is that of the 45 or 52 cc Zenoah. That is free advice and worth what ya paid for it. A 45cc will have a 43mm piston and a 52 will have a 44.9mm piston.
@@truckinedchannel9982 I think that Husky bought out Zenoah. All parts can be found by searching Chinese 5200, there you will see the 4 model numbers, 4500, 5200, 5800 and 6200. They all use the same carb, so the bigger size doesn't help much but for torque. I have found that parts go bad fast on the $80 saws and the 130 Chinese clones are better quality.
Do you know what type of chain these 5200 saws take? I heard that they suck, and I'd like to order an Oregon chain for the saw I just ordered. I'm having a hard time finding the specs.
Yea...those bar studs DO NOT need to be that right. You will strip that case out so fast And how about letting a saw warm up before you rev the piss out of it And I'll ignore the fact you didn't do a face cut on that tree and got the saw stuck Instantly lol
It was a joke to get folks riled up. I wasn't actually tightening the that tight, and yes, it was warmed up. You think a China saw is going to fire up that easily out of the box? It took 10 pulls to get it primed and smoked like crazy.
Got saw fixed. Keyway broke out of the flywheel. Mechanic said he has never seen that happen with a chainsaw.
Hope I don't have that problem with mines.you have any update videos on the saw I have the same one and just got it few weeks ago.
Why is it so I interesting the bar is inside the bar cover? Why is “that’s interesting” is used so much? That’s interesting !
You always got to adjust the chain after it heats up it will stretch and I've seen even a brand new song you might have to adjust the carburetor mixture not necessarily the idle speed
I have the same exact saw you have to break it in first and it will have little more power.after one gallon mines did a little better but what anyone expect for 100 bucks.
Well that's interesting
Been nice to have a link to eBay. I've been searching but I can't find any $85 saws
I just looked it up. Same saw is now $102. Everything goes up over time
@@truckinedchannel9982 thanks. Now I'll just look for $102 chainsaws. 😀
www.ebay.com/itm/20-Bar-52CC-Gasoline-Chainsaw-2-0KW-Gas-Powered-Wood-Cutting-Chain-Saw-US-/144083434001?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@@lunarrnthere’s a better one that’s a husqvarna clone for $90. 52cc. Made much better.
I want to cancel my order for the Black Max and get one of these in order me some Amazon chains which are much better than what they give with this
Are you still able to use it and would you buy it again
Yes, I was able to repair it, and it is still running. After a few modifications it works fine
What oil ratio are you running ?
@@shannonwhitaker9630 been using 40:1
Thanks ! Yep the recommended ratio of 25:1 is just crazy.
This is not a Stihl Clone it is a Zenoah Clone saw, model 5200 or a model 4500. The top cover is that of the 45 or 52 cc Zenoah. That is free advice and worth what ya paid for it. A 45cc will have a 43mm piston and a 52 will have a 44.9mm piston.
Cheap china saw. Actually I have found parts are closer to Husqvarna saw. Engine runs fine, but bar and chain are crap.
@@truckinedchannel9982 I think that Husky bought out Zenoah. All parts can be found by searching Chinese 5200, there you will see the 4 model numbers, 4500, 5200, 5800 and 6200. They all use the same carb, so the bigger size doesn't help much but for torque. I have found that parts go bad fast on the $80 saws and the 130 Chinese clones are better quality.
@@iowaunemployment that's why I use Stihl. Just bought cheap on to see how it works
@@truckinedchannel9982 These saws work really well and last a long time. It is worth the time to fix them up. I have 3 and use them without mercy.
Do you know what type of chain these 5200 saws take? I heard that they suck, and I'd like to order an Oregon chain for the saw I just ordered. I'm having a hard time finding the specs.
Its not a junk german clone, its vlined after a zenoah japanese saw
Plastic throwaway saws. Im using 60,s XL12 homelites and some larger 70,s Homelites. 50 plus year old saws still going strong.
Even the older 70’s model metal poulans were great saws. I have 2. Besides new fuel lines every 10 years or so, they run forever
Equivalent?!
Hi invite to a friendly competition from down under Australia, Chinese chainsaw underdog competition part 1 rules cheers kevin
Check out my competition videos where I put a Stihl against the Chinese saw
Chainsaw has already failed. Will do an autopsy video if I don't have to send it back.
That's interesting
Yea...those bar studs DO NOT need to be that right. You will strip that case out so fast
And how about letting a saw warm up before you rev the piss out of it
And I'll ignore the fact you didn't do a face cut on that tree and got the saw stuck Instantly lol
It was a joke to get folks riled up. I wasn't actually tightening the that tight, and yes, it was warmed up. You think a China saw is going to fire up that easily out of the box? It took 10 pulls to get it primed and smoked like crazy.