Harvey Alpha HW 110S - 36P Set up / Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ต.ค. 2024
  • I finally replaced my 30 year old table saw and upgraded to the Harvey Alpha HW 110S - 36 P 4HP Dovetail table saw. I'm very pleased with this upgrade. I plan on added the sliding table and router table. More videos to follow on those ideas as well as an overall system review after I use it for a few months.
    Website | keimpiece.com/
    IG | / keimpiece.carpentry
    FB | / keimpiececarpentry
    Email | keimpiece@gmail.com
    Music - Whispers in the rain (Royalty Free From Motion Array)
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 43

  • @karlsievers4191
    @karlsievers4191 11 หลายเดือนก่อน +4

    I had a crappy old Craftsman table saw too and now own the 52" 4 HP Harvey. It's terrific. My abilities will probably never catch up to this machine, but that's a good thing. Nice vid.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  11 หลายเดือนก่อน

      thanks for watching. How's your experience been with the dust collection? Similar to mine?

  • @steelhead1194
    @steelhead1194 11 หลายเดือนก่อน +3

    You will love this aw, I love mine. I moved the black end exstenion top to the rear and it is now my out feed table, works great and was very easy to do.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  11 หลายเดือนก่อน

      I built a quick and easy outfeed table that doubles as extra scrap wood storage. Basically just a 2x4 box with mdf top. I put leveling feet on it though so I can fine tune the height and get it perfectly level and even with the table saw, since we all know garage floors are never level

    • @tomcooke9221
      @tomcooke9221 10 หลายเดือนก่อน +1

      I like your idea about moving the black extension table...how's that's working out so far? considering that..or eventually maybe trying to added a router plate. I think i have a cutout template somewhere that came the router lift I bought years ago 🤔

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  10 หลายเดือนก่อน

      I'm actually about to install the Harvey Router System, it comes with a cast iron insert. 110lbs. So I'll be removing the black composite piece and replacing with the cast iron. @@tomcooke9221

    • @steelhead1194
      @steelhead1194 10 หลายเดือนก่อน

      it is working out very well, I have it still there with no changes.
      @@tomcooke9221

    • @tomcooke9221
      @tomcooke9221 10 หลายเดือนก่อน

      ​@@steelhead1194so you have set up a couple inches from the rear rail or were you able to somehow attach it?

  • @Lumberhacksteve
    @Lumberhacksteve 7 หลายเดือนก่อน +1

    Great video and very Raw and authentic. TY for sharing, I am so looking forward to getting my Harvey.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  7 หลายเดือนก่อน

      Thanks for watching. I'm working on editing another one for Harvey showing the slider and router add on stay tuned, I should have it up in a few days!

  • @tylercooper6717
    @tylercooper6717 11 หลายเดือนก่อน +1

    I have a SawStop and mine was the same way when running only the overhead off a 6HP ShopVac. I then plumbed in a dedicated line off my Rockler 1250 Dust Collector to run in conjunction with my overhead, and it is a world of difference. There is hardly any dust. You could damn near eat off it!

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  11 หลายเดือนก่อน

      yea I was thinking about doing something like that. Using the dead space under the table for a dedicated dust collection system

  • @benjaminbecker3645
    @benjaminbecker3645 9 หลายเดือนก่อน +2

    Semper Fidelis! Just got one and appreciate your setup video. Wish I had seen this before I setup mine b/c I also scratched my fence rail with that metal stopper piece. Wish the instructions were better and explained how to properly place the fence onto the rail.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  9 หลายเดือนก่อน

      thanks for watching, yea, I got the sliding table attachment so I'll be doing a video on that and I'm currently setting up the router wing so there's going to be more videos coming.

  • @tomcooke9221
    @tomcooke9221 10 หลายเดือนก่อน +1

    I agree with you about the instructions ...I'm in the middle of setting mine up now. the exploded diagrams at the end helped me with alot of the which bolts go where questions. I quick note, you installed the legs incorrectly...they go underneath the table. I almost did it the same way you did 🤦 nice video all around!

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  10 หลายเดือนก่อน

      Dang, I'll have to take a look. Evidence that the instructions aren't good. I'll have another video coming out on the slider attachment and the router

  • @steelhead1194
    @steelhead1194 11 หลายเดือนก่อน +3

    I have the shark over head guard, and the harvey G700 dust processor, my dust collection is much better than what I see on your set up. The G700 is what I feel is the best and is why I have good collection, I got thr shark mostly be cause I just wanted the best. I never took what came with the saw out of the box. All my big tools are Harvey now.

  • @ValiRossi
    @ValiRossi 9 หลายเดือนก่อน +1

    Really nice saw. Vacuum is always a challenge.

  • @GeorgeLowrey
    @GeorgeLowrey 11 หลายเดือนก่อน +1

    The Harvey is very impressive. I'm deciding between a Laguna and a Harvey. Both seem quite good.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  11 หลายเดือนก่อน +1

      I can't speak for the laguna but I'm very happy with this saw

    • @MTMXBL
      @MTMXBL 9 หลายเดือนก่อน +2

      i've read the fence is a bit "wobbly" on the laguna - I would def do significant research prior to purchase.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  9 หลายเดือนก่อน

      No wobble on the Harvey that's for sure@@MTMXBL

  • @vbacans
    @vbacans 7 หลายเดือนก่อน +2

    Nice review! Only question that I would have is what is your dust collection system.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  7 หลายเดือนก่อน

      thanks for watching. it's a 2HP harbor freight. I have another video on how I set it up, go check it out.

  • @josephsinclair1338
    @josephsinclair1338 9 หลายเดือนก่อน +1

    If you haven’t bought those accessories yet m, they are currently 30% off! Nice video man.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  9 หลายเดือนก่อน +1

      thanks for watching! Yea I already have them, collecting video footage to make follow up videos and reworking my dust system for the router table.

  • @christianrobledo2724
    @christianrobledo2724 4 หลายเดือนก่อน +1

    The table saws has always always and I stress that, always had problems with dust collection, they’re the worst when it comes to dust collection

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  4 หลายเดือนก่อน

      yea, it's better than what I had before but the dust is always a problem.

  • @ajvc2233
    @ajvc2233 6 หลายเดือนก่อน +1

    Watched your series on the Harvey and am in the market for a table saw upgrade. I was pretty set on the Laguna but the Harvey seems like a very good saw too and like the upgraded miter gauge it comes with. The $500 shipping is tough tho.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  6 หลายเดือนก่อน

      yea it's def a consideration. whats the shipping on the delta or saw stop? Id imagine all large cabinet saws have high shipping.

    • @coaltrain18000
      @coaltrain18000 6 หลายเดือนก่อน +1

      Free shipping through today

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  6 หลายเดือนก่อน

      nice!@@coaltrain18000

    • @justahunk
      @justahunk 6 หลายเดือนก่อน +2

      Sign up for their emails. Harvey offers free shipping every few months it seems.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  6 หลายเดือนก่อน

      nice
      @@justahunk

  • @RossWilliamsDC
    @RossWilliamsDC 8 หลายเดือนก่อน +3

    What dust collector do you have? I suspect it is underpowered. You should be getting much better dust collection.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  8 หลายเดือนก่อน

      I have the Harbor Freight 2HP with a cyclone and canister filter. I have another video showing how I built that out.

    • @sphixcanada
      @sphixcanada 6 หลายเดือนก่อน +1

      @@KeimpieceCarpentry I have a clone of this table saw with nearly the exact same dust collection setup (literally different colour plastic on the back solid coloured piece). The dust collector port that offshoots to the 1.25" port is useless, the air flow from a dust collector just isn't fast enough for smaller dust/chips. Cap it off and hook the blade guard dust collection up to a good shop vac or if you have one a dust extractor. I did this and now have almost zero dust when making cuts. Hope this helps.

    • @KeimpieceCarpentry
      @KeimpieceCarpentry  6 หลายเดือนก่อน

      That's exactly what I was thinking of doing and storing a shopvac under the wing. I find that I don't use the overhead attachment very often as unless you're doing a high number of repeat cuts at a wider width (3 plus inches) it's not very practical. thanks for the info@@sphixcanada