Tutorial: Make your own extension leads! How to crimp Futaba and JR
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Tutorial: Make your own extension leads! How to crimp Futaba and JR
**Please like and FOLLOW me! =D martinpickering...
TH-cam: www.youtube.com...
Facebook: / pickeringrc
Instagram: / pickeringrc
Subscribe to stay up to date of all my latest stunts and watch them first. It's all good stuff and its free!
VIDEO DESCRIPTION:
Too many people still use pre-made extension leads in their planes. Making your own is not only cheaper but better! Always have the right length extension properly made every time! This is my step by step of how I make mine, normally using Powerbox Premium wire.
Martin Pickering
Thanks for the good video and clear instructions👍👍
Great video. I bought a nice crimper, wire stripper and hardware a few months ago, but put it aside after unacceptable results. Your video made the operation very staight forward and I completed several servo connectors today without any waste. Your tip at 1:45 about using a small pliars to slightly crimp the wire holder made all the difference. Your clear explanation of the process also added to my success. My first one came out alright, but everyone there after was spot on. Thank you for posting!
Thank you Greg! Really pleased that you found the video helpful!! =)
Hey Martin. super video, again;).. many tips and good inspiration. You are really a good ambassadoer for our sport/hobby. Keep up the good work m8. Aim high-fly low ;) best regards MaxDK
Great vid M! WHERE CAN ONE BUY THE CRIPS? In bulk and varied sorts any suggestions?🥇🥇🏆👍🏻
Do have to buy this special tool i just need to wire one connector
3:25 you have put Ground and Signal the wrong way around
The pressure of Tv!