How to Replace Lower Control Arm 97-05 Lexus GS300
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Buy Now!
New Control Arm Set from 1AAuto.com 1aau.to/ia/1ASF...
In the video, 1A Auto shows how to remove and replace a lower control arm that is broken, worn, rusty or has bad bushings. The video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, Lexus GS300.
This process should be similar on the following vehicles:
1998 Lexus GS300
1999 Lexus GS300
2000 Lexus GS300
2001 Lexus GS300
2002 Lexus GS300
2003 Lexus GS300
2004 Lexus GS300
2005 Lexus GS300
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaT6/1A...
• 14mm Wrench 1aau.to/oHu/1AX...
• 17mm Wrench 1aau.to/oHu/1AX...
• 22mm Wrench
• 10mm Socket 1aau.to/oaD4/1A...
• 12mm Socket 1aau.to/oaSz/1A...
• 14mm Socket 1aau.to/oaSz/1A...
• 17mm Socket 1aau.to/oaSz/1A...
• 19mm Socket 1aau.to/oV9/1AX...
• 21mm Socket 1aau.to/oV9/1AX...
• Blowtorch
• Pickle Fork
• Side Cutters
• 1/2 Inch Breaker Bar 1aau.to/oox/1AX...
• Ratchet 1aau.to/oa67/1A...
• Socket Extensions 1aau.to/oaSz/1A...
• Torque Wrench 1aau.to/oaeu/1A...
• Copper Anti-Seize
• Marker / Writing Utensil
• Rust Penetrant
• Center Punch 1aau.to/ojk/1AX...
• Floor Jack 1aau.to/oLo/1AX...
• Hammer 1aau.to/oIa/1AX...
• Jack Stands 1aau.to/oIN/1AX...
• Wire Brush 1aau.to/ook/1AX...
Subscribe: / @1aauto
Check out our playlist:
Lexus GS300 1997-2005 2nd Generation: • Lexus GS300 1998-2005 ...
For More Info visit us at 1aau.to/h/bBk/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You guys deserve more views and better credit for a how-to video of this quality.
Bravo.
this is probably the greatest how to suspension video ive ever seen. Thank you guys so much
+ethan singer Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Already saved 1432$ from your videos and doing my struts myself. Now I'm just going to replace everything. 243k on my IS
Doing these on my day off tomorrow lol, I've done coilovers, upper ca, inner tie rod and lbj. Fun fun
Very informative video. I just got my 10piece. I can’t wait to work on my 99gs400 suspension. Thanks man !
+PASSED_12 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
How’s the quality on parts? Just ordered mine
PASSED_12 are you trying to rebuild your front suspension, if so was the 10 piece enough for everything?
Hmmm. I got a 10 piece from them also about 6 months ago, about to install them within a few days. So how are the parts holding up?
“You wanna grip that whole nut” 😂
The best clarification on any video no matter the front suspension part, its all jam packed into this good job!
Greetings from Australia. Great video & info, however, I always thought that all suspension components needed a final tighten & torque once the full weight of the car was on the ground, bit difficult I know without an inspection pit, but I have been toldthat in numerous workshop manuals & other how-to videos. Just wish parts down under were morecost effective like yours. Some of our prices for parts are prohibitive. Thanks mate.
Incredibly grateful to find this channel now I know where to get the information and the parts thank you guys very much .
This guy is a pro thank buddy very good in explaining everything
Awesome sauce 💪💪💪💪💪
A lot of good tips, and this whole demonstration is super helpful because it's very similar setup to an IS200 / 300. Nice one. But completely contrary to all that is 3:51 oh my word... Just use a ball joint separator FFS.
Man this is perfect video Like from Hong Kong!
Best how to video I ever watched. Great Job!! A +++
I ordered a 10 parts kit for my Lexus SC430 and now I’m waiting to get the struts to do the job, too bad that A1 don’t sell the struts for my application. Thumbs way up on your video tutorial.
+calevel florida Thanks for checking us out! 1AAuto.com
Great video for your job. It looks like you had better have a lift, air tools, and a strong arm. How did the job go?
Awesome video
That strut bolt is an eccentric bolt used for alignment. You need to hold the nut and undo the bolt.
That is why that but has those notches.
So this is pretty good video and it does show you how to do the job however I skipped a lot of these steps and was able to save time and effort. First off you don't need to remove the upper strut mount bolts you also don't have to remove the steering knuckle caliper or any of that stuff. If you're just doing lower control arms you don't need to do anything with upper control arm, sure doing all that gives you more room but the room gained for the amount of work is mimal.
Also just unbolt the lower ball joint from the knuckle but leave the ball joint in the control arm, pull the control arm and ball joint out as one (you're replacing both anyways)
What camera did you use? Wow so clear.
What is the name of the arm connected to the center of the control arm? Do you guys carry that part?
Did you ever figure it out? I also need that part
Where did you get the tensile information?
422- if that's what your into*? Lmao
I ordered a sway bar link and the pin that is pressed in.
They put it on backwards. How can I contact you guys and get it replaced? I ordered through amazon.
The one on the passenger side is good.
hello i have the very same car (2000 lexus gs300) and just got the ball joint replaced because it failed while i was driving ( i was driving slow, no one was hurt but cost me a lot). Now i want to replace my shocks(with coilovers and a very conservative drop) as well as my upper and lower control arms to make my suspension more reliable. My friend has a lift and i plan to do the repairs myself with the kit you offer. Can I do this without ruining the new ball joint that was recently installed? I would appreciate a response thanks.
+Javier Pacheco You should be able to simply loosen the nut on the ball joint to lower the control arm and replace the struts/shocks. 1aauto.com
@@1AAuto thanks i appreciate the reply.
Does this also apply to the 2001 GS430?
+Snib2987 Thanks for checking us out! Yes, this should be the same for the 2001-2005 GS430's. 1aau.to/m/Shop-1AAuto-c
Do you have to torque it down with the wheels on the ground or it doesnt matter?
Cool👍
Hey 1A Auto I was wondering what the peice you're supporting with your right hand at 20:02 on my GS-300 that part is very bent and needs replacing.
@42:00 the swaybar end-link torque specs (i have the official specs) 41 ft lbs.
Where do I buy that impact
I hoped that you can sihp internationally
How do you know if the lower control arms are bad? My Lexus dealer said mine need replaced, but I have no idea how to verify that. What goes wrong with them? Rust?
Look where its connected to the body. Probably worn out and you can see metal etc
control arms usually don't go bad, its the bushings that get rotten or cracked with time. So instead of changing the bushings, dealers charge you for the whole control arm. The sign of a bad control arm is usually clunking, tires getting unbalanced wear and so on.
Bushings go bad. The arms themselves RARELY fail which could be catastrophic if steel snaps. It's labor intensive to remove the parts, remove the bushings, replace bushings, and reinstall the parts. So replacing the part is actually cheaper.
14m37s where did he hammer at? any body know?
is this the same setup as a 98-00 LS400?
+bad We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
I just replace my lower control arms, but my drivers side grinds my rotor every time i make a left U turn...
😮зачем так лупить кувалдой... 😂
Can anybody tell me the name of the other arm he screws the control arm into at 32:37
it's called the "FRONT (RIGHT /LEFT ) LOWER REARWARD ARM"
Caster Arm
New
Is my car model
What is the name of the arm connected to the center of the control arm? Do you guys carry that part?
If its the long one bolted to the control arm with two bolts, it's the strut bar.
Ryan Smith old post but I’m pretty sure he was talking about the “caster” arm
Is the rearward facing caster arm.