Well and systematically explained. Good job and keep up to benefit engineering communities. Let God give all the well being to you to continue on this path.
Raman Ji if the MDI has not fallen much after solar installation but the PF has come down from 0.99 to 0.54 will the APFC work in controlling as per the termination method u suggest. Earlier the industry has been using capacitors to maintain PF constant at 0.99. No APFC was their.
Can you please tell me , is it possible to connect two different make invertors with different load capacity in tqi different phases in 3 phase connection??
A very informative video once again Raman Please explain how did you assume the value of Reactive power in this example Also generally the PF is indicated on the existing electricity bills, one can calculate the Reactive power working backwards , however the Active power should be variable as the load requirements vary throughout the day , then is the MDI to be taken as the value of Active power to do the calculations
@@solarfacts4242I thought the same because the variable is only active power, KVar is fixed so the angle would not be as per 22.9KVar in your example.
Hello sir, main ek ZED cum DG sync solar plant lagana chata hu, but termination point kaha pe kare , jisme plant Grid or DG dono se operate ho. Aur power factor ki upor koi effect nehi ayi
My question is that in big projects like 500kw ,should we install dc breaker with dc spd on string ,it is necessary or not please explain it,if yes and if not
Sir, our solar panel meter show 0.99f but in main meter of grid distribution occur of pf show 088 pf. Sir, will there be solution if we connect solar system before apfc panel ?
@@solarfacts4242 ok sir. Thank you for your quick response sir... We installed solar in our industry and bidirectional meter not yet installed by EB. We don't have APFC... We have installed capacitors by individual loads. So PF is affected while running in solar power. I thought installing a bidirectional meter would solve this issue...
APFC sense Power factor not running KW, if our plant will run in in 40 Kw at that time if power will down APFC will charge therre rest of all capacitor bank i guess
Sir you are correct I think we both are saying the point with different different angle, I am saying ACFC sense load and if load change then power factor will automatically change because of load behaviour.
we have an installation of 15kw GTI , when GTI is connected the PF goes down to 0.6 in EB meter , when it is removed /disconnected , PF goes above 0.95 .APFC panel is not installed at site . Kindly Suggest how can we solve this issue , as before solar installation customer site PF was well above 0.9. Pl guide
I am facing power factor problem after installation of solar system. I got perfect solution through this viedeo. Thanks...
Thank you sir
Great 👍
Thank you! Cheers!
Well and systematically explained. Good job and keep up to benefit engineering communities. Let God give all the well being to you to continue on this path.
Very interesting video
Thanks 🙏
Excellent 👍👍👍
very infomative video bro.thanx for explain in details.
Thanks
Very useful information
Thanks 🙏
Please share with your friends
Good teaching style and explanation...
Whenever i see your classes, I get to learn something new.
Thanks 🙏
Thanks Ramanji for sharing such a usefull information.
So nice of you
VERY VERY INFORMATIVE RAMAN JI
So nice of you
Thanks for valuable jankari di 🙏👌👍
you have just earned a subscriber. Very informative video with perfect explanation. Thank you so much !!
Do reactive power control option in delta solar inverter works for pf correction?
Can we change the inverter setting to improve this?
Really Good information Sir Thank You ❤
Very informative video ramanji, keep on making such a core technical informative video, we will keep on watching your video👍
Thanks a ton
Please tell us 5 kw 3 phase abhi lagwan hai kaya APFC panel residence may lagwana kaa faida hai please guide me
Raman Ji if the MDI has not fallen much after solar installation but the PF has come down from 0.99 to 0.54 will the APFC work in controlling as per the termination method u suggest. Earlier the industry has been using capacitors to maintain PF constant at 0.99. No APFC was their.
In this case you have to check will your APFC panel is working proper or not
Thank you sir.
Thank you 🙏
Please share with your friends
Perfect
Thanks
Can you please tell me , is it possible to connect two different make invertors with different load capacity in tqi different phases in 3 phase connection??
You are explaning like a technician. It will more effective if you explain as a Electrical engineer
Assalam o Alaikum sir Kiya solar ke sath power factor capistor on hote h
A very informative video once again Raman
Please explain how did you assume the value of Reactive power in this example
Also generally the PF is indicated on the existing electricity bills, one can calculate the Reactive power working backwards , however the Active power should be variable as the load requirements vary throughout the day , then is the MDI to be taken as the value of Active power to do the calculations
These values i have taken for the calculation only
@@solarfacts4242I thought the same because the variable is only active power, KVar is fixed so the angle would not be as per 22.9KVar in your example.
How much distance between solar input from load panel
Hello sir, main ek ZED cum DG sync solar plant lagana chata hu, but termination point kaha pe kare , jisme plant Grid or DG dono se operate ho. Aur power factor ki upor koi effect nehi ayi
Please discuss on leading power factor in this case sir
Hi thx a lot it was great in depth explanation however one doubt is @ power consumed by Inverter. Can you pl address same also thx n regards
Rajesh
Thanks................
thanks
Agar m point a or point b pr apfc se ct lga du toh woh sahi load sense krega ??
You can do only you have to see your load sensing should be ok
My question is that in big projects like 500kw ,should we install dc breaker with dc spd on string ,it is necessary or not please explain it,if yes and if not
This is a nice tutorial..Please put in in English Subtitles
Ok 👍
Sir, our solar panel meter show 0.99f but in main meter of grid distribution occur of pf show 088 pf. Sir, will there be solution if we connect solar system before apfc panel ?
if you terminate solar plant output before APFC you will get the resolution
@@solarfacts4242I think location B will be good. Because the power factor panel shows the resultant angle of net 40kW and 32.9KVar (fixed).
Kiya 50kva ke transformer 60kw solar system lagsata hai
Is APFC panel needed even if we install bidirectional net metering sir ?
Yes
@@solarfacts4242 ok sir. Thank you for your quick response sir... We installed solar in our industry and bidirectional meter not yet installed by EB. We don't have APFC... We have installed capacitors by individual loads. So PF is affected while running in solar power. I thought installing a bidirectional meter would solve this issue...
Sir please make a video BESS project
A scenario me 32.9Kvar kahan se lekr load ko supply kryga ? jab grid se requirement 0 hogayi tw
From APFC panel
I am also very concerned about this issue. Do you have English documents?
Hy sir I'm bsharat Ahmed form Pakistan
Agriculture motor power factor??
Didn’t get you
Mera scenario B hai… project complete ho chuka hai. Abb kya solution ho sakta hai PF improve karne ka
Capacitor bank
APFC sense Power factor not running KW, if our plant will run in in 40 Kw at that time if power will down APFC will charge therre rest of all capacitor bank i guess
Sir you are correct I think we both are saying the point with different different angle, I am saying ACFC sense load and if load change then power factor will automatically change because of load behaviour.
I think Your gess is right.. APFC panel operate on PF only not sensing on load (kW)
@@solarfacts4242 It will not sense load. it will sense only pf value and try to make it correct pf..
The solar on grid matter not only from PF metre not working
we have an installation of 15kw GTI , when GTI is connected the PF goes down to 0.6 in EB meter , when it is removed /disconnected , PF goes above 0.95 .APFC panel is not installed at site . Kindly Suggest how can we solve this issue , as before solar installation customer site PF was well above 0.9. Pl guide
Sir I'm from South Africa Hindi speaking but I'm 4th or 5th generations so I cannot understand. Can you please do a video in English or subtitle's.
What if we install 100kw Solar the Power factor issue will not be there??
There may be chances that load in the industry is mix of resistive and capacitive.
Sir nhi ho rhA
_23 rh jata h
👌👍
Thanks 🙏
👏👏👏👏👏🏻👏🏻👏🏻👏🏻👏🏻🤝🤝🤝🤝🤝👍
Raman sir can you share your contact, I have some doubts regarding PF , we have installed 400 kw solar power system.
यदि जब प्लांट बंद है तो सारी की सारी पावर ग्रिड में जाएगी उस समय पावर फेक्टर को कैसे मेंटेन करेंगे
that time export power factor will be 1
Sir pls put in English please🙏
sure
Tamil translation
Sir app ka whatsap nambar cahyee