WATER TANK LEVEL CONTROL SYSTEM FOR A PRESSURE WASHER HOLDING TANK
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- WATER TANK LEVEL CONTROL SYSTEM FOR A PRESSURE WASHER HOLDING TANK.
How to use a hudson valve so it will only fill half a tank.
Here is the list of parts for it.
Hudson Valve
amzn.to/2qdb9AG
1" Bulk Head fitting
amzn.to/2JvVeGH
1" NPT to Slip
amzn.to/2qgS5Bw
1" PVC Pipe
amzn.to/2qfh5tJ
PVC Primer
PVC Glue
amzn.to/2Evej86
Affiliate links
![[TH] VALORANT Champions Seoul - Lower Bracket Final - LEV vs TH](http://i.ytimg.com/vi/fyYkI80GG4o/mqdefault.jpg)
I just saw this and made the same thing about 3 months ago.... only difference in mine is I left the the pipe loose so I can adjust my water lever per job then secure it at the desired depth with a clamp
Jason
I made something like this as one of my first videos. Years later i realized an easier solution OUTSIDE of the tank. I put a ball valve between my supply reel and the tank. That way i can shut off supply when i get close to the end, but if i need more water its just a 90 degree turn.
First Choice Power Washing i mean the mid height vs top only valve
That's exactly what we do. We also have a three way connection and added another hose for rinsing or filling buckets. Works well..👍🏼
Hi can anybody help me, what is the fastest way to fill one of these tanks I think it would take way to long from the standard mains supply from the house
A fire hydrant
If I have a 275 gallon tote and I measure one foot from the bottom then how many gallons is that? Thanks in advance for the imput.
It should say on the side of tank
99.74026 gallons. Pretty much the first horizontal cage bar.
40"x48"x12'" = 23,040 cubic inches then google has a cubic inches to gallons calculator which gives you 99.74026 gallons.
Hells yeah!
I did the same thing. Run about 100 gallons
Thanks for watching
Hey bud I hooked up my buffer tank and my pressure washer lead is vibrating what did I do wrong.
Could be dirt in one of the values
@@kingofpressurewash on the pump i dont have a pump to pump the water. i have 3/4 hooked up from the buffer tank to the filter in between should i do something different. i didnt have this problem until i hooked up this buffer tank
Wet Windows Guy the tank may have had dirt in it and piece of dirt may have gotten into one of your check valves
@@kingofpressurewash i have a filter on it before the pump
Wet Windows Guy what size pump
Hey man, I have a quick question for you. You are way more knowledgeable about this PW stuff than me. I have a 4200 4gpm Honda GX390. My question to you is, how can I downstream through 150' of high pressure hose? It will only draft from shorter hose lengths. I've seen alot of your vids and know you have the same machine. And no way you only use 50 feet of hose. What's the secret?
Colby Reneau make sure the gun is opening fully
You have the right size tips for your machine
Right size injector
@@kingofpressurewash tips are correct. Jrod from pressure tek. Injector is a new 2.1 which in my research is the correct one. Gun is correct and opened. Any more ideas?
Colby Reneau will pull soap with no gun on it
@@kingofpressurewash haven't tried that, I'll let you know tomorrow. Happy 4th bud.
@@kingofpressurewash I cant believe it worked with no gun. Pulled it through quickly. Any ideas for good guns for me?
Could you list the sizes of the pipe and fittings that you’re using? If not could you just send me that information. Thanks
Hey Jason, great I have a question about how to feed a direct drive pressure washer from a buffer tank if it is even possible how it is done, I don't want to burn the pump in my new PW I am new to the PW business however I have a Honda 4200PSI 4.0 GPM this is what I have to use until things gets better thank you
@@henrydixon3159 Hey Henry. I had the same question. Did you ever get an answer to this? Thanks!
You're supposed to put glue on the fitting as well, and I think you should show how it ties in to the tank, you keep tripping over your words to try and sound intelligent and come across making yourself look, well I think you know. I've watched several of your videos and you claim every time I'm going to take you through every step, yet you never do, just repeat yourself over and over. "Having said that" do more and talk less.....
Make YOUR OWN videos then. Or better yet, go out and get you some "hands on" training instead of relying on others videos. Jason has done a lot for the members in our industry and has actually made it a little too easy for people "like, well...YOU know who". Jason keep up the Great work!