I’m just getting started and haven’t even unboxed my flex shaft yet, but I already bought the hammer handpiece and this adapter and I’m excited to get to use it!
I think it is great. Of course people will use it too fast and heat up their hand piece but they will learn to turn it down and be patient. The difference in cost between a gravermax and compressor and this little tool is a huge difference making your tool a very viable entity. Good job!
I’m going to try it.. Engraving takes forever with my current set ups an SE Flexshaft & new Dremel 4300 ( My old DremPro lasted 22 years) so I am hoping this reduces the amount of time carving and engraving.
I’m glad I got one. Will try it out this Saturday 2-15-20 when I get my hammer hand piece. I’m excited as I just recently got into CoinRings. This will add another dimension 👍
Ladies and gentlemen I am proud to announce that I have teamed up with Pepétools and have started a test run of five engraver adapters for the foredom H.15 hand piece - five have been made as a test run and will be sold for $50 USD as an introductory price point. I will Be posting a short video on how to be one of the first five!
Can i use a pavetron tip on the hammer hand piece am talking about the one your using in the video omg that what you talking about still reply am watching
This is very cool! Which Foredom model would you recommend for general, do-a-bit-of-everything type work? When I get one, I would love to add this engraving attachment!!!
The SR is a great all around model. Perfect for a first foredom! The hammer works well with this as long as the speed is kept very low- the LX is designed for low speed high torque (perfect for the hammer) not ideal with burs. . The TX is a torquey little bugger with higher speeds than the LX I currently use the TX and the LX
You are correct! You will need the H15 - the duplex is a personal preference. I have one on mine and I haven’t had issue with it. The people who have had issues with it report that the duplex is the weakest link when it comes to tool durability. More often than not the duplex spring breaks before anything else. I do get curious about if care, storage and maintenance play a role in those reported failures.
You can but it’s not as controllable and as accurate as an air graver . This tool offers a great entry level option for people wanting to explore power graving
Does this only work with the foredam flex shaft? I currently have another flex shaft at home and two gravers that are already set in their wooden handles.
I know it has been a while since this was made, but I was looking into buying this from Pepe tools . Does the hammer head piece (with your attachment of course) would work with the Foredom SR?
Exactly the reason I decided not to go that route. I have made some out of annealed O1 tool steel and then hardened and tempered them but that process was too labor intensive for what I was attempting to accomplish
Hey Holly, yes it does. I designed it to take most commercially available gravers - the square shanked GRS will Need the corners rounded slightly to fit the round hole
I think it is awsome. I am just starting metalsmithing so I am not ready for engraving, but if I was I would buy one. I really hope you do well selling it.
Was a great idea man! Was a great video for sure but it was extremely slow & seemed to drag on during the 1st 1/2 with the talking. Then again it sounds like ya have a cold & I'm like a zombie when I have one. Next video should try to have the mic closer or somethin as ya have to turn the volume to Max & is still hard to hear. This was ONLY meant to be constructive as all else is great! The funny thing is I was watching this as I was trying to make something similar over the past few days as I have the little Micro-Mark lathe. Will letcha know if I think of any great ideas to add. But I definitely think they're worth goin into production for sure! If ya have enough people buying them it'd be worth eventually takin to a CNC machine shop to have em produced at a faster & cheaper level for you as there are a TON of engravers that'd probably buy this not even bringing up actual jewelers...👌
P.S. ya could also sell them on Instagram once you have your design down pat as I know a ton of people that sell stuff on Instagram alone. Then eventually go the Etsy route then eBay/Amazon if they decide to. Good luck either way... 👌👍
Vinwelder stay tuned for a few weeks to a month- I am working out a deal for production! Along with that deal I have agreed to include 3-5 shorter to the point videos !
I appreciate the kind words and you are absolutely correct, the nasty cold was going around and kept a hold of me for a while! When everything gets finalized I’ll make an announcement!
I absolutely will- as soon as I get all the ducks in a row I have plans to make some more videos showing it’s use and tips on how I use it. I also have some plans for making some other custom attachments-if you have any ideas please let me know
@@LionPunchForgeLPF As above.. I have the SR, can't afford air graver etc but would love to engrave! If you finalise the cost please post :) cheers, Steve (UK)
Definitely will get. Just link me to the item when you are ready!!! Amazing. I modify 95% of my jewelry tooling and his saves me 1000’s just as it’s saving you. Yes!
Turn up the volume or invest in quality audio equipment please. the demonstration was good, but difficult to follow without the audio. Can you bright cut with this handpiece
A better camera and external Mic are on my upgraded equipment list! Part of the problem is that I am still Learning to edit and do post production. Thank you for watching. Yes you can bright cut with this adapter.
Stop! Look through your camera and set up a perimeter of what is visible to the viewer. Lay down a tape line toward the camera side, just barely out of view. Then, film as usual, but don’t come close to that line, or we can’t see what you are trying to show us.
I’m just getting started and haven’t even unboxed my flex shaft yet, but I already bought the hammer handpiece and this adapter and I’m excited to get to use it!
I think it is great. Of course people will use it too fast and heat up their hand piece but they will learn to turn it down and be patient. The difference in cost between a gravermax and compressor and this little tool is a huge difference making your tool a very viable entity. Good job!
Capt. Goldenberg Thanks Captain! I enjoy making my own tools and I enjoy it more when they work !
Capt. Goldenberg An exciting update very soon!
Capt. Goldenberg facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Just bought! Excited to use it
Yay! Something many of us novice metalworkers have been wanting!
Originally I made it for me and decided it was too good not to share huge thanks to Pepetools!
I’m going to try it.. Engraving takes forever with my current set ups an SE Flexshaft & new Dremel 4300 ( My old DremPro lasted 22 years) so I am hoping this reduces the amount of time carving and engraving.
I’m glad I got one. Will try it out this Saturday 2-15-20 when I get my hammer hand piece. I’m excited as I just recently got into CoinRings. This will add another dimension 👍
Keep me posted !
OMG same yogurt jar I use. Lol.
Cool. Necessity mother of invention.
Ladies and gentlemen I am proud to announce that I have teamed up with Pepétools and have started a test run of five engraver adapters for the foredom H.15 hand piece - five have been made as a test run and will be sold for $50 USD as an introductory price point. I will Be posting a short video on how to be one of the first five!
LPF...Please hold one for me...millhollow@cox.net. I really like the guys at PepeTools and have several of their products...good choice!
Invoice has been sent to your email
Would also like one, please: uplink1010@gmail.com
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Would love to have one!!
This is probably a stupid question but can metal CNC engraving bits be used in Flexshafts?
i'm thinking and was wondering, my badeco marto why not possible work as an engraving handle, why not doesn't ?
would have been nice if the adapter piece you made would have been in the picture instead of below. I would like to have seen it
What I've seen the lion punch should fit on the harbor freight flex shaft system?
Yes the Foredom tools and the LPF system will fit I’ve tried it. The HF flexshaft is a little sloppy but it is functional
Omg I need one of these in my life!
pscilya facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
TY, why the fk foredom did not make this already? you are the man!
And it’s in production! Check it out here- limited time intro price pepetools.com/collections/accessories/products/lpf-adapter
How much
What is the largest graver shaft that this will hold???? You may have said, but I cannot remember.
1/8 inch dia or 2mm square - it Will accept standard GRS gravers
@@LionPunchForgeLPF thank you.
An exciting update very soon!
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Hello , where I can buy this nice tool?
Can i use a pavetron tip on the hammer hand piece am talking about the one your using in the video omg that what you talking about still reply am watching
Yes you can it was designed for the hammer handpeice
@@LionPunchForgeLPF thank you do you have any used tools to sell me I need a combination rolling mill or let me know what you have or the link
Can we purchase one of these from pepetools?! Or did only 5 get made?! Gosh so wanting to know!
Yep Pepetools sells them now !
Yep, I would be very interested as I already have the motor+handpiece; how will we find out if you make such??? Thanks!
I have a Facebook and Instagram page for Lion Punch Forge- I will likely to post there
mark kaplan An exciting update very soon!
mark kaplan facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Can I ground down one of the punches that comes with into a gravure for soft metals like Aluminum,silver, and gold?
Paul Handley I’ve heard of that being done. But the steel doesn’t hold the best edge
That's so cool, what a handy tool :)
Thank you Shaun!
Reach out if you would like to try one
@@LionPunchForgeLPF Thanks Bro, I'm good , taking a break from engraving for a bit, and to many toys to play with already :)
If you change your mind hit me up, I love your work and follow your channel!
Good vid Brother... What is thread size..? Subbed..
This is very cool! Which Foredom model would you recommend for general, do-a-bit-of-everything type work? When I get one, I would love to add this engraving attachment!!!
The SR is a great all around model. Perfect for a first foredom!
The hammer works well with this as long as the speed is kept very low-
the LX is designed for low speed high torque (perfect for the hammer) not ideal with burs. .
The TX is a torquey little bugger with higher speeds than the LX
I currently use the TX and the LX
When you are ready Pepetools.com has all of the products needed to get started !
@@LionPunchForgeLPF Thank you so much for the excellent reply, and for making the engraving attachment!
@@LionPunchForgeLPF Regardless of which Foredom model I get, I'll need the H.15 hand piece, correct? Do you recommend the duplex?
You are correct! You will need the H15 - the duplex is a personal preference. I have one on mine and I haven’t had issue with it. The people who have had issues with it report that the duplex is the weakest link when it comes to tool durability. More often than not the duplex spring breaks before anything else. I do get curious about if care, storage and maintenance play a role in those reported failures.
Did you produce for Pepetools..I bought the ir lion punch forge adapter
They produce it for me
Hello there, what is the springy thing at the end of the hand piece?
That is a duplex spring that allows for a little more comfortable angle using the hammer. Foredom does sell those as add ons
@@LionPunchForgeLPF Oh, that was a very quick answer, Thank you. Also can you make pave setting with it?
You can but it’s not as controllable and as accurate as an air graver . This tool offers a great entry level option for people wanting to explore power graving
@@LionPunchForgeLPF Thank you very much, for your time, sleep well.
This is sooooo beautiful 😍😍
What is the round clamp called please. So great fir moving round
That is called a ball vice or engravers block
@@LionPunchForgeLPF nice one. I’ve got a moveable vice but this is amazing
I guess your in USA?¿ so won’t ask where you get it from
Try looking for used ones on eBay! There are a lot of deals to be had
@@LionPunchForgeLPF wꙬw £221 ($274)
@@lalune59 they are not cheap !
Awesome my friend! Super clever
Lapidary Dave Thank you Dave! I’ve pondered this for quite a while !
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Does this only work with the foredam flex shaft? I currently have another flex shaft at home and two gravers that are already set in their wooden handles.
Yes they fit the keyed shaft on many flexshaft brands. Send me an email and I can help further
@@LionPunchForgeLPF just emailed, thanks
Will this work with Any foredom?
Joe Mcsweeney yes but the speed will need to be kept very low ideally the LX motor is best
I’m interested. Great tool. Just got the hammer piece. Haven’t tried it out yet
You can pick it up at Pepetools.com or one if they retail distributors!
This would be great! Send updates if you produce
CJ Mello I am confident in the prototype so far so there is a good chance... price is what I am worried about
CJ Mello An exciting update very soon!
facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
is it still available? do you ship to germany?
Yes it is Ara! And we do ship to Germany ! Are you on Facebook or Instagram contact me on Lion Punch Forge pages
pepetools.com/collections/accessories/products/lpf-adapter
Will you be producing these? This s great! Please, please let me know if you decide to make these available.
Yep! Should hear soon!
Andrea Hanson facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
@@LionPunchForgeLPF I'll take one
Email me at lionpunchforge@gmail.com
Hi need your help or afvice
I know it has been a while since this was made, but I was looking into buying this from Pepe tools . Does the hammer head piece (with your attachment of course) would work with the Foredom SR?
Yes it does
Are you making progress in this? I’m interested!
Sarah Budde yes, getting closer!
Sarah Budde An exciting update very soon!
Sarah Budde facebook.com/698602686864678/posts/2578185135573081?sfns=mo
You would need to anneal the gravers to thread them.
Exactly the reason I decided not to go that route. I have made some out of annealed O1 tool steel and then hardened and tempered them but that process was too labor intensive for what I was attempting to accomplish
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Wish I could see what you are talking about!
Do the GRS gravers fit this attachment?
Hey Holly, yes it does. I designed it to take most commercially available gravers - the square shanked GRS will
Need the corners rounded slightly to fit the round hole
How do I purchase one … like yesterday 😁
There is a link in the description
I think it is awsome. I am just starting metalsmithing so I am not ready for engraving, but if I was I would buy one. I really hope you do well selling it.
Linda Lowney An exciting update very soon!
facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
I’m just seeing the video, did you end up selling it?
Yep! Now offered by Pepetools as the LPFG!
Was a great idea man! Was a great video for sure but it was extremely slow & seemed to drag on during the 1st 1/2 with the talking. Then again it sounds like ya have a cold & I'm like a zombie when I have one. Next video should try to have the mic closer or somethin as ya have to turn the volume to Max & is still hard to hear. This was ONLY meant to be constructive as all else is great! The funny thing is I was watching this as I was trying to make something similar over the past few days as I have the little Micro-Mark lathe. Will letcha know if I think of any great ideas to add. But I definitely think they're worth goin into production for sure! If ya have enough people buying them it'd be worth eventually takin to a CNC machine shop to have em produced at a faster & cheaper level for you as there are a TON of engravers that'd probably buy this not even bringing up actual jewelers...👌
P.S. ya could also sell them on Instagram once you have your design down pat as I know a ton of people that sell stuff on Instagram alone. Then eventually go the Etsy route then eBay/Amazon if they decide to. Good luck either way... 👌👍
Vinwelder stay tuned for a few weeks to a month- I am working out a deal for production! Along with that deal I have agreed to include 3-5 shorter to the point videos !
I appreciate the kind words and you are absolutely correct, the nasty cold was going around and kept a hold of me for a while! When everything gets finalized I’ll make an announcement!
Vinwelder An exciting update very soon!
Vinwelder facebook.com/698602686864678/posts/2578185135573081?sfns=mo
If you finally do get your production line going, please do make it known to your subscribers. I am very interested in this tool. Thanks, Cary
I absolutely will- as soon as I get all the ducks in a row I have plans to make some more videos showing it’s use and tips on how I use it. I also have some plans for making some other custom attachments-if you have any ideas please let me know
Horace Pea facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
I need one. But need to know the cost.
Judy Fountain the cost is $55 at pepetools.com/collections/accessories/products/lpf-adapter
If you enter LIONPUNCH at check out you may get 10% off
love the baby hex tool LOL awwwwwwwwww
EXCAVADE with a purpleheart handle :-)
EXCAVADE An exciting update very soon!
EXCAVADE facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I have three left! $55 shipping included
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Hardly hear anything in the video.
Older video, I have new camera equipment now
Maybe the next video will have louder audio. The tools looks cool though and fills a niche'
An exciting update very soon!
@@LionPunchForgeLPF I can hardly wait
Ricky Baker facebook.com/698602686864678/posts/2578185135573081?sfns=mo
Now for pre-sale pepetools.com/collections/accessories/products/lpf-adapter
Very easy to make if you have a lathe or know someone who has one…3mm thread…
Yep!
Love that
Diane Geary it’s now in production ! Visit Pepetools.com the LPF Engraving adapter
No sound.
NORMAN BRADLEY I just listened. It’s good on my end
This is exactly what I’ve been looking for, If you ever make these to sell, i’d be really interested!
I have started to work out cost of material and my labor... so far I am happy with the product so one step closer to possibly producing them
@@LionPunchForgeLPF As above.. I have the SR, can't afford air graver etc but would love to engrave! If you finalise the cost please post :) cheers, Steve (UK)
@@andruel99 i will for sure !
Cora Wade An exciting update very soon!
facebook.com/698602686864678/posts/2578185135573081?sfns=mo
I think you should name it Gregory. Gregory the graver.
Wait. Hamilton the hammer hand piece adapter. Nickname: “the Hamilton Tool.”
The hammy the pounder, Gurdy the graver, The Anderson adapter , Hector the hammer graver.
I would buy one
I ended up making a some slight design changes and have started to buy material to make 50-100 of them !
And I want buy one
Definitely will get. Just link me to the item when you are ready!!! Amazing. I modify 95% of my jewelry tooling and his saves me 1000’s just as it’s saving you. Yes!
Rennan Garrido An exciting update very soon!
Rennan Garrido facebook.com/698602686864678/posts/2578185135573081?sfns=mo
Turn up the volume or invest in quality audio equipment please. the demonstration was good, but difficult to follow without the audio. Can you bright cut with this handpiece
A better camera and external Mic are on my upgraded equipment list! Part of the problem is that I am still
Learning to edit and do post production.
Thank you for watching. Yes you can bright cut with this adapter.
also can you use GRS style carbide graver blades with this tool?
Haha! I saw this after the one on the market and thought, what a loser, someone already invented this.
Haha! This was my prototype video - the beginning of LPFG journey!
Lion Punch Forge LPF hope you can afford an air one now, I bought one from rio and have never used it, such a shame, rather get yours, more convenient
This one does everything I need it to so I figured I’d save my money for something else
Lion Punch Forge LPF I’m going to sell my air one and buy one of yours
Stop! Look through your camera and set up a perimeter of what is visible to the viewer. Lay down a tape line toward the camera side, just barely out of view. Then, film as usual, but don’t come close to that line, or we can’t see what you are trying to show us.
Thank you Cady! I have also recently bought some better camera equipment that will allow for a better product! I appreciate the feedback. Chris LPF