Wow thank you for sharing this. I drive a 2020 ford fusion and had no idea why my heater was not working. I came across your video what’s weird is mine did not go through the fan cycle but it did fix my issue. Thanks again 👍
On my 2019, I turned on max defrost because it was super misty and fogged up after sitting overnight. When I hit Auto to put it back to normal, the temp remained at 85. I turned it down to 68 and the same hot, hot air kept coming out both sides. It did turn down to cold air on LOW only. I did the reset you showed in the video and all is back to normal. Thanks SO MUCH for posting this! You rock!
If this doesn’t work, check your antifreeze. Did some research. My antifreeze was way below the minimum fill mark. Orange, 50/50 pre diluted antifreeze. Thx for helping tip!
I have a Lincoln Mkz 2014. It was having the same symptoms. Hot on one side cold on the other. Used this video to reset my 2014! Thank you. Your video saved me a trip to the StealerShip 🎉 or my local auto AC mechanic. Probly saved me from having to replace the heater coil, ac compressor, actuator motors, and replace the touch panel. I watched 20 youtube videos before finding yours. It was perfect!
This is a great video! It worked on our 2019 Edge. I found the comment on a thread somewhere to do the power/defrost reset, but that did not explain the step of having the display in climate mode, watching till the fan bars stop their cycle, then pushing power one more time. Now that I did as you said, the heat is working again. Wish I had found this earlier, would have made our ride home much more comfortable.
Thank you! I have a 2015 Edge and was thinking I would need to take it in but this worked great. Thanks for saving me a lot of money. Much appreciated.
Why does this work? That's what I would like to know. I thought it was a stuck thermostat but I'm glad I tried this trick before going to autozone. I followed these steps and heat started to work again on a 2017 Ford Fusion SE. No need to replace thermostat.
I did this cause my heat wasn’t working thank you it didn’t fix it but I heard my blend door actuator start clicking and now I’m pretty sure what’s wrong with it
Thank you for sharing this fix. It worked on my 2020 Ford Edge SEL. It has been in the mid 90’s here in FL and can’t be without a/c. Just curious if this has happened again to you since resetting the system?
I did this and the system reset, but I still have cold air. When the engine is revved, the heat comes out. However, the rear heat works at all idles like it should.
This did not work for my 18 fusion. However, I pulled the glove box out and thought I was going to be replacing the passenger side actuator, due to the symptoms. In my case, I actually found that the actuator was working however the arm from the actuator to the blend door was disconnected. It’s a glide pin from the actuator side to the actual lever from the blend door. I was able to move the plastic lever from the blend door to let the guide pin from the actuator to slide back in. My problem was solved. The actuator moved the blend door to the passenger door side and I got heat on my passenger side. I hope this helps someone!!
It worked for me I own a 2020 Ford Fusion SEL n this method worked for me. Thank you
Wow thank you for sharing this. I drive a 2020 ford fusion and had no idea why my heater was not working. I came across your video what’s weird is mine did not go through the fan cycle but it did fix my issue. Thanks again 👍
On my 2019, I turned on max defrost because it was super misty and fogged up after sitting overnight. When I hit Auto to put it back to normal, the temp remained at 85. I turned it down to 68 and the same hot, hot air kept coming out both sides. It did turn down to cold air on LOW only. I did the reset you showed in the video and all is back to normal. Thanks SO MUCH for posting this! You rock!
If this doesn’t work, check your antifreeze. Did some research. My antifreeze was way below the minimum fill mark. Orange, 50/50 pre diluted antifreeze. Thx for helping tip!
I have a Lincoln Mkz 2014. It was having the same symptoms. Hot on one side cold on the other. Used this video to reset my 2014! Thank you. Your video saved me a trip to the StealerShip 🎉 or my local auto AC mechanic. Probly saved me from having to replace the heater coil, ac compressor, actuator motors, and replace the touch panel. I watched 20 youtube videos before finding yours. It was perfect!
What fan button do you press at the beginning
This is a great video! It worked on our 2019 Edge.
I found the comment on a thread somewhere to do the power/defrost reset, but that did not explain the step of having the display in climate mode, watching till the fan bars stop their cycle, then pushing power one more time. Now that I did as you said, the heat is working again. Wish I had found this earlier, would have made our ride home much more comfortable.
Thanks a lot ! My blower was not working on an edge 2022, I checked relay and fuse, all was good, did this reset and now its working !
Thank you! I have a 2015 Edge and was thinking I would need to take it in but this worked great. Thanks for saving me a lot of money. Much appreciated.
Which buttons did you push having same issue 2015
Definitely worked on my 2018! Thanks!!!!
Worked on my 2019 fusion hybrid! Thank you sir!❤
Thanx bro. It worked on my 2019 fusion. Had to do it twice
Thanks so much!! Was having the same problem and worked like a charm
Thank you. This worked on my 2015 ford edge
This worked for me, thank you!
Why does this work? That's what I would like to know. I thought it was a stuck thermostat but I'm glad I tried this trick before going to autozone. I followed these steps and heat started to work again on a 2017 Ford Fusion SE. No need to replace thermostat.
Disconnect battery and hook up agin after couple minutes. It worked for me perfectly. 👍👍👍👍👍👍for 2012 Ford Edge Sport.
Thanks pal.. Totally did the trick! 😊
Omg this works!! Thank you so much
I’m going to try on my expedition 2019 we will see thanks for sharing the video
Thanks for the video! Worked great!
I need to buy you a beer!
Hahaha glad it worked!
Any idea how to do the reset if there is no defrost button? 2019 hybrid and I have max defrost and rear defrost….
Thank you, it worked on our car! Sheesh
I did this cause my heat wasn’t working thank you it didn’t fix it but I heard my blend door actuator start clicking and now I’m pretty sure what’s wrong with it
Does it work for the AC?
2018 confirmed working. On the climate dashboard you can press on the driver facing fans to be sure they work too.
Will this work for the air conditoner
It should if you're blower /fan is not working properly. Definitely worth a try let me know if it works.
What year is your vehicle? If 2015-2018, was the process the same?
Thank you for sharing this fix. It worked on my 2020 Ford Edge SEL. It has been in the mid 90’s here in FL and can’t be without a/c. Just curious if this has happened again to you since resetting the system?
I've only had to do it once since owning the car.
Did I hear stealerships? lol.
I did this and the system reset, but I still have cold air. When the engine is revved, the heat comes out. However, the rear heat works at all idles like it should.
So, turns out the water level was low. After adding about 3/4 gallons of water to the radiator, the heat works fine.
Thank you!
This did not work for my 18 fusion. However, I pulled the glove box out and thought I was going to be replacing the passenger side actuator, due to the symptoms. In my case, I actually found that the actuator was working however the arm from the actuator to the blend door was disconnected. It’s a glide pin from the actuator side to the actual lever from the blend door. I was able to move the plastic lever from the blend door to let the guide pin from the actuator to slide back in. My problem was solved. The actuator moved the blend door to the passenger door side and I got heat on my passenger side. I hope this helps someone!!
Thanks for letting us know I hope your comment helps someone.
Stealerships!!🤣🤣🤣yep, you're right
How do you people still buy fords???? I don’t understand the blindness you all have on a bad product.
Oscar, at what age was it that you realized you were a moron?
HOW DO PEOPLE BUY GM PRODUCTS WHEN THEIR ENGINES CANT MAKE IT PAST 40K AND THERES CLASS ACTION SUITS AGAINTS THEM?😂😂😂😂😂😂😂😂😂😂😂😂