วีดีโอ

Why does this work? That's what I would like to know. I thought it was a stuck thermostat but I'm glad I tried this trick before going to autozone. I followed these steps and heat started to work again on a 2017 Ford Fusion SE. No need to replace thermostat.

😅👍

Thanks a lot ! My blower was not working on an edge 2022, I checked relay and fuse, all was good, did this reset and now its working !

Thank you, it worked on our car! Sheesh

Thanks for the detailed video. How has it held up for you?

Love your helper great job

Disconnect battery and hook up agin after couple minutes. It worked for me perfectly. 👍👍👍👍👍👍for 2012 Ford Edge Sport.

Just use a power washer and coat it ! Heng’s brand works great too !

This did not work for my 18 fusion. However, I pulled the glove box out and thought I was going to be replacing the passenger side actuator, due to the symptoms. In my case, I actually found that the actuator was working however the arm from the actuator to the blend door was disconnected. It’s a glide pin from the actuator side to the actual lever from the blend door. I was able to move the plastic lever from the blend door to let the guide pin from the actuator to slide back in. My problem was solved. The actuator moved the blend door to the passenger door side and I got heat on my passenger side. I hope this helps someone!!

Hello,If a part of the plastic on the air conditioner breaks, can water get in?

Can you use this on a rubber membrane roof? I have used Dicor and Enterabond Tape around all my vents, front and back end caps. Will this product work over the Dicor & tape?

I did this cause my heat wasn’t working thank you it didn’t fix it but I heard my blend door actuator start clicking and now I’m pretty sure what’s wrong with it

Phil Swift likes it 😅😅😅😅 !!

Thanks 👍

Omg this works!! Thank you so much

had my roof plasti-dipped when i bought mine, been 5 years no issues having it peeled and redone this winter.

I’m curious as to if you had problems with the coating separating after a few years. It didn’t look like you had the roof very clean. I just did my roof with the same product. You might want to consider snap in gutter extensions.

How can you tell if it is EPDM or not? I am new to trailers and have to fix my roof.

Awesome video, thanks for your expertise.

Croc gang gang!😁

That's EDPM roof

Why haven't you used the Eternibond Tape Sealant first around the edges before putting the silicone coating?

How did you manage to get that 5 gallon bucket up on the roof ?

Isn't the overload spring suppose to stay per instructions?

Worked on my 2019 fusion hybrid! Thank you sir!❤

Thanks so much!! Was having the same problem and worked like a charm

Well part of your gutter is missing. That’s why I drains down the side.

Silicone doesn't stick to die core.

Any idea how to do the reset if there is no defrost button? 2019 hybrid and I have max defrost and rear defrost….

Did I hear stealerships? lol.

I would do the covers, a/c and maybe the pvc vent covers too.

Will it work on my leaking rolled vinyl trailor roof?

I have a fiberglass top, I'm pretty sure on my van high top roof on my conversion van. Does anyone know of anything that works on that?

Did my roof in 2015. It’s on the pacific coast in the desert 100 yards from the beach. Still working great! Worth every penny!

It worked for me I own a 2020 Ford Fusion SEL n this method worked for me. Thank you

Around the fixtures aren’t you supposed to strip the old stuff off and then apply a fresh seal? I’m a little confused

Has it help keeping the rv cooler?

👍🏼

I’m going to try on my expedition 2019 we will see thanks for sharing the video

Thank you. This worked on my 2015 ford edge

This worked for me, thank you!

Wow thank you for sharing this. I drive a 2020 ford fusion and had no idea why my heater was not working. I came across your video what’s weird is mine did not go through the fan cycle but it did fix my issue. Thanks again 👍

On my 2019, I turned on max defrost because it was super misty and fogged up after sitting overnight. When I hit Auto to put it back to normal, the temp remained at 85. I turned it down to 68 and the same hot, hot air kept coming out both sides. It did turn down to cold air on LOW only. I did the reset you showed in the video and all is back to normal. Thanks SO MUCH for posting this! You rock!

Definitely worked on my 2018! Thanks!!!!

That Henry tropical cool shit is 112$ a gal js....

Thanks pal.. Totally did the trick! 😊

I have a rubber roof on my camper. Its a 2019 and there are several bubbles. So far no leaks. Can I seal over these or do I slice them, then re-glue and seal the roof ?

How is this holding up?

I have a Lincoln Mkz 2014. It was having the same symptoms. Hot on one side cold on the other. Used this video to reset my 2014! Thank you. Your video saved me a trip to the StealerShip 🎉 or my local auto AC mechanic. Probly saved me from having to replace the heater coil, ac compressor, actuator motors, and replace the touch panel. I watched 20 youtube videos before finding yours. It was perfect!

Why add an ada leaf