for the longest time my car kept stalling or hesitating when giving the car some gas. I thought it was a maf or anything related to my air intake. I had my mechanic put his scanner on and every-time my engine called for gas it didnt read or was a low number indicating my fuel injectors might be going bad, also my car is at 180k miles, so I was definitely due for some fuel injectors. I bought the parts from trq and installed them while watching this video. I test drove the whip and it feels brand new now. Thank you so much!
why did you take off metal clips from injectors before removing injectors whereas you put these first when installing new injectors and put whole assembly together?
Does P0300 to P0303 could be triggered by these? I have been searching and I already replaced my coils and spark plugs but the car still has this codes on and sometimes flashing, includes sometimes loss of power. Still is not the Head gasket because I had it checked with a Combustion Leak tester and it came negative.
Before putting the covers back on everything, it might be wise to prime the rail and check for leaks. I've seen people burn their cars down by not double checking their work.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
for the longest time my car kept stalling or hesitating when giving the car some gas. I thought it was a maf or anything related to my air intake. I had my mechanic put his scanner on and every-time my engine called for gas it didnt read or was a low number indicating my fuel injectors might be going bad, also my car is at 180k miles, so I was definitely due for some fuel injectors. I bought the parts from trq and installed them while watching this video. I test drove the whip and it feels brand new now. Thank you so much!
You pulled the fuel pump fuse, tried to start the engine, then put the fuse back in and turned the ignition on. 🤔🤔🤔
This is freaking awesome now I can knock this out with the fuel pump assembly at the same time! Thanks !!
I just pulled the whole rail with Injectors together.
Easier that way
Doesn't make a mess of fuel all over the place
The silence when the clip flew away was priceless lmao
Will this same process work for my 2012 Honda civic
What about cleaning or any kind of prepping the hole that they are going back into?
Or do you just leave it dirty?
My car is stuttering when accelerating and I changed the gas filter thinking it was it but I still have the same issue any ideas ?
looks like only 1 injector was actually replaced(new) did you test all injectors?
Can you upload a video of replacing fuel injectors of 2005 honda civic
why did you take off metal clips from injectors before removing injectors whereas you put these first when installing new injectors and put whole assembly together?
Does P0300 to P0303 could be triggered by these? I have been searching and I already replaced my coils and spark plugs but the car still has this codes on and sometimes flashing, includes sometimes loss of power. Still is not the Head gasket because I had it checked with a Combustion Leak tester and it came negative.
Very clear explanation video, do you have a video of changing the fuel pressure regulator.? Thanks
8:40 "a little bit of fuel may come out" ... rail pours tank empty
Hey, I took out my fuse started the car to clear the gas line. Then after I put back the fuse all the check engine light went off. Is this normal?)
Thanks for this video
Can you please make video on replacing intake manifold for this vehicle..
+Panjala' s We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
I have a 2004 civic Lx d17A will this method be similar?
Thank you
Thanks for posting this, have this job to do on my mums civic 👍🙂
that is wonderful, awesome!
Followed the steps but the check engine light is flashing and engine is shaking while idling. Sounds like a misfire. What should I do?
Appreciate this
Like always nice video.
Will this work with a '12?
Before putting the covers back on everything, it might be wise to prime the rail and check for leaks. I've seen people burn their cars down by not double checking their work.
+@henrylint3227 Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ