Repairing a Rotten Cargo Trailer Door

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024

ความคิดเห็น • 31

  • @josephmyers1492
    @josephmyers1492 2 ปีที่แล้ว +5

    You used so many hacks that made your job a genius work. I learned several tricks from you today. Looking forward to doing my own build.

  • @SandyridgeGR
    @SandyridgeGR ปีที่แล้ว +1

    Bryan you did a very nice job.

  • @350eclipse
    @350eclipse ปีที่แล้ว +1

    Impressive, great job. Very handy.

  • @dictumfactum9468
    @dictumfactum9468 8 หลายเดือนก่อน +1

    Just what I needed to see. Youre gonna save me a lot of brain cells. thank you.

  • @spudmcat
    @spudmcat 3 หลายเดือนก่อน +1

    Can you repair mine in Phoenix?! Ha! Nice work!

  • @credmon3346
    @credmon3346 3 หลายเดือนก่อน

    I don’t “hate on this”. But lost 4 fingers due to table saw having no cover. Just the. Sound of the table saw causes some anxiety. When I trained on that machine I was told there were no covers for the blade🫢. Three fingers replaced but now I am much more conscious of what I use

  • @doingitwithnothing
    @doingitwithnothing 2 ปีที่แล้ว +1

    Good repair

  • @willfreethemfreethem7671
    @willfreethemfreethem7671 2 ปีที่แล้ว +1

    I'm having same problem ATM water from bottom of door wicking up

  • @brentvonaschen7064
    @brentvonaschen7064 ปีที่แล้ว

    Also silicone all trim to panel joints

  • @brentvonaschen7064
    @brentvonaschen7064 ปีที่แล้ว

    Block o wood to tap the aluminum frame will save a headache with wheater sripping

  • @SandyridgeGR
    @SandyridgeGR ปีที่แล้ว

    I would have just put the door back into the opening, close the latch, and then attach the hinges so that it is exactly where it wants to sit.

  • @darrellwampler3882
    @darrellwampler3882 2 ปีที่แล้ว +1

    I like the 420 sticker👍😎

  • @ktabor9672
    @ktabor9672 10 หลายเดือนก่อน +1

    Did a good job and got a few old materials taking up room in the garage out of the way. Thumbs up!

  • @Sclassmercedes
    @Sclassmercedes 2 ปีที่แล้ว

    How thick is that diamond plate

    • @bryansprojects3570
      @bryansprojects3570  2 ปีที่แล้ว +1

      I think it is 1/8" or 0.125".

    • @Sclassmercedes
      @Sclassmercedes 2 ปีที่แล้ว

      @@bryansprojects3570 that’s a good size . Them diamond plate are expensive

  • @PaulAliceJ
    @PaulAliceJ ปีที่แล้ว

    Wouldn't biscuit joints worked better?

    • @bryansprojects3570
      @bryansprojects3570  ปีที่แล้ว

      I wanted to give it more glue area and try to keep it straighter.

  • @Durataur
    @Durataur 2 ปีที่แล้ว +1

    Wish I had done it this way. My dad and I made the decision to rebuild the whole door and it turned out to be a mess. Now here I am about to sell the trailer and have to redo the door again due to poor sizing of the foam

  • @SFick
    @SFick 2 ปีที่แล้ว +1

    Nice job!!! I just purchased a trailer with very similar issues.

  • @marcellovena
    @marcellovena 2 หลายเดือนก่อน

    Hi Bryan, like the channel. I need to do the exact repair. I was wondering why you didn't use the pocket screw jig on the first brace too, rather the notching?

    • @bryansprojects3570
      @bryansprojects3570  2 หลายเดือนก่อน

      I wanted to give it a little extra support and keep it straight.

  • @chriswood4510
    @chriswood4510 ปีที่แล้ว +1

    Genius idea thanks!

  • @TomShamblin
    @TomShamblin ปีที่แล้ว +1

    Great Job Guy!!!

  • @thomashorn9152
    @thomashorn9152 3 ปีที่แล้ว +1

    You did great job on that door. Do you remember what size Torx screws to get those hinges off..

    • @bryansprojects3570
      @bryansprojects3570  3 ปีที่แล้ว +1

      They are a T45

    • @thomashorn9152
      @thomashorn9152 3 ปีที่แล้ว +1

      @@bryansprojects3570 thank you for getting back to me really appreciate it very much.

  • @nate4036
    @nate4036 2 ปีที่แล้ว

    Wonder if you could just use a piece of advantech, to make a solid door

  • @ivanbg5167
    @ivanbg5167 ปีที่แล้ว

    Is that a South GA Cargo trailer?

    • @bryansprojects3570
      @bryansprojects3570  ปีที่แล้ว

      Yes it is.

    • @ivanbg5167
      @ivanbg5167 ปีที่แล้ว

      @@bryansprojects3570 I’ve had my fair amount of issues with my trailer from them. To use the warranty, South GA Cargo want you to drive it to their manufacturing facility in Pearson, GA; even though I purchased purchased the trailer in NC.