Had the problem when I had a mini, there is a trick that temp cures the issue and I learnt this on you tube. With ignition on hold the window switch in the up position and hit the Door card hard 3 time roughly where the motor is. Then the widow should refract. Each time it gets stuck just repeat.
If you are in a situation where the window is locked upwards... Follow the panel removal steps then: Loosen the two gear nuts. Take the two bolts at the very bottom of the door and the two at the top off. Remove the three screws holding the window motor the frame. Force the bottoms of the regulator towards the midline of the door. The window will now drop enough for you to remove the gear screws.
Im tier ...doing w40...I has done many times and about 3 month later its get shock again....but the motor and all around its ok, ,, just gets stock Every few
No need for a hacksaw. There’s a hex screw that holds the motor on. Just remove it and the motor will come loose. Because you hacked through it, your motor is now sitting loose on its hook.
Hi there today I had a care the care came to me because it wasn't able to start I've checked the spark plugs pulse but there weren't any sparks in the coil so after I checked the Crankshaft sesnore it consisted of three wires there were ground but there weren't 12V to the sensor from the ECU do you think that the problem
I think what is causing this is opening the door too fast, you have to open the door, wait for the window to drop down, then pull forwards, other wise you're pulling on the window cause its still in the rubber trim/seal, or you do it too fast and confuse the motor, not sure how the car knows when to put the window back up and how it knows not to put it too high
HA HA HA HA HA same dexterity and thinking as I was 6 and you never showed in video what repaired the window. This must be a joke, exclusive for Professional Electromechanics. Took me to the times when I was a kid, looking to find the electrical fault, and ended doing a lot of unecessary mechanical dissasembly. All of a sudden, THE ICE CREAM CAR ! HA HA HA HA HA
Had the problem when I had a mini, there is a trick that temp cures the issue and I learnt this on you tube. With ignition on hold the window switch in the up position and hit the Door card hard 3 time roughly where the motor is. Then the widow should refract. Each time it gets stuck just repeat.
That never worked for me
Thank you for the video! Love the ice cream truck! I think I can try my window now!
😅
👍👍👍
Thanks for making the video.
😊
👍👍👍
If you are in a situation where the window is locked upwards...
Follow the panel removal steps then:
Loosen the two gear nuts.
Take the two bolts at the very bottom of the door and the two at the top off.
Remove the three screws holding the window motor the frame.
Force the bottoms of the regulator towards the midline of the door.
The window will now drop enough for you to remove the gear screws.
Thanks!
👍👍👍
This worked great on mine when I was in this situation. Thanks!
That's great!
👍👍👍
Or take the panel off, and smack above the speaker
Im tier ...doing w40...I has done many times and about 3 month later its get shock again....but the motor and all around its ok, ,, just gets stock Every few
really useful to me，My R50 had same issue，thank you so much！
salem Lau
No worries...
Thank you for watching!
Thank you so much. Great fix.
sue hayward
Hi
Thank you for watching and for your comment!
Videos useful. My motor works and the regulator isn't damaged but the window isn't moving still. Do you have any advice please?
Looks like the control side... switch, wiring... 🤔
Thank you for watching and for your comment!
th-cam.com/video/0YnT74K82YE/w-d-xo.html
I put my window down and heard a slight bang now it won't work, I can still hear the motor working. What do you recommend I should do?
Take the door panel and inspect what happened...
Thank you for watching!
I have the same problem. How did you manage to sort it out please ? @Muzzaa
@@moniaolomoniaolo5757 paid the money and took it to a garage lol
@@Muzzaa thank you. But what was the problem ?
@moniaolomoniaolo5757 I can't remember sorry bro
Also take off door strip outside of the window Then u can get to them dam cloggs too
👍👍👍
Get a oil filter chain remover. Dose perfectly
👍👍👍
What kind of lubricant did you use?
Pierce Trey
All sorts of... lol
But mainly silicone based...
Thank you for watching!
hi there im having trouble reconnecting the bottom left cable, any tips?
No need for a hacksaw. There’s a hex screw that holds the motor on. Just remove it and the motor will come loose. Because you hacked through it, your motor is now sitting loose on its hook.
You can replace the screw afterwards...
Thank you for watching and for your comment!
what size is that hex screw?
what kind of grease (lub) should we use?
Hi
I have used silicone based...
Thank you for watching!
Hi there today I had a care the care came to me because it wasn't able to start I've checked the spark plugs pulse but there weren't any sparks in the coil so after I checked the Crankshaft sesnore it consisted of three wires there were ground but there weren't 12V to the sensor from the ECU do you think that the problem
Hi
Sorry for the delay to reply... check the wires and connections first...
I think what is causing this is opening the door too fast, you have to open the door, wait for the window to drop down, then pull forwards, other wise you're pulling on the window cause its still in the rubber trim/seal, or you do it too fast and confuse the motor, not sure how the car knows when to put the window back up and how it knows not to put it too high
Possibly...
👍👍👍
@@LMAutoRepairs thats when mine got stuck up
you skipped over the most important parts.........
I thought I skipped the basics... but might be wrong... sorry...
Thank you for watching!
No entiendo bien el inglés aún
ICE CREAM
Joe Sniadecki
😂😂😂😂😂😂😂
Thank you for watching!
👍
HA HA HA HA HA
same dexterity and thinking as I was 6
and you never showed in video what repaired the window. This must be a joke, exclusive for Professional Electromechanics.
Took me to the times when I was a kid, looking to find the electrical fault, and ended doing a lot of unecessary mechanical dissasembly. All of a sudden, THE ICE CREAM CAR !
HA HA HA HA HA
Fixed it... didn't I?
🤔