Great video! As an MSP, we have extensively evaluated various VoIP solutions, including FreePBX, in our quest for excellence. Through rigorous testing, we've determined that Thirdlane Multi Tenant PBX system, coupled with Cisco's IP phones, offers an optimal blend of performance and reliability. Thanks!
So far the best phone programming yet. Will try with my 7960 to convert to SIP, already have files from Cisco to convert but will do provisioning of all phones once hooked to my Free PBX BOX.
Thank you so much, I finally got my Cisco 6941 working. I thought that it was incompatible with SIP & FreePBX but you made it work. The k you so much!!!
I remember watching this for the first time to setup my 7961 with FreePBX. I went from using FreePBX to running a full on CUCM and Unity connection system
Wondering if you can help... my phones are not provisioning. The phone pulls the config file from my TFTP server, but when the phone boots up it continues to list itself as "unprovisioned" without any changes made. Unsure if its to do with my PBX; I'm running FreePBX on VirtualBox with a bridged adapter. My softphones are connecting no problem so I don't think it's routing related. Thanks so much for a great tutorial.
@@bcm50 I've been trying to get a 7970 and 7945 to work over NAT and it never works. Would you happen to have a sample XML file I can refer to that works over NAT?
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
@I Love Enterprise Gear Hello, I was wondering, can the FreePBX server be hosted in the cloud? Or will the phone not connect to cloud servers? Also, will this method work with 3CX? Thanks.
Looking for some help getting a 7942 to work with Everyday Voip. Following this excellent video has got the phone working with the SIP protocol, now I'm trying to do the configuration file. This is where things seem to differ from Free PBX. Everyday Voip have given me a SIP URL (from which I got the IP address) and a port (5060). Then a username and password for my account. I can't see where in the configuration I can enter the username/password bit. I don't want an extension number, I just want this to be the phone that rings when my VOIP number is called. Any ideas?
I am following the same steps in the video for a 7942, and when transferring the files, nothing seemed to me, only the log indicates that TERM42.defaul.loads were sent. then the phone shows the Cisco logo and does nothing. How did you manage to update it successfully?
I am trying to connect this to a Yeastar S20 which extension uses number, letter and 1 capital letter. Is there anyway I can insert such password into Cisco xml file? since I heard it receives only numerical value, not letters..let alone capital letter
Hello, with the help of your video I was able to configure a Cisco 7942 and register it with an Elastix pbx, but I have not been able to configure a Cisco 7962, it remains registered. If you could help me guide me with the configuration file for this model, I would greatly appreciate it. thank you.
Set up a VLAN on your switch to isolate a few ports away from your local network. Then you can use the switch as a passthrough for the TFTP transfer of the SIP files with your computer acting as the DHCP server.
can i use a cloud based freepbx with this? i got a 7945g and realized it wont work with 3cx, i cant have external ip address's here, everything is carrier NAT. i tried setting up freepbx locally and my 7945g just says registering an restarts over and over
hi, i'm having an issue with my 7962, it's not willing to get the files from the tftp server, i joined the discord tho but cannot read or write channels
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
@@bcm50 I tried this on my 8811. It keeps asking for the CTLXXX.tlv and ITLXXX.tlv files... which I don't have since , I do not have CUCM. Is there a way to bypass this? the phones are brand new with 11.7
@@bcm50 Hey Laurens. I just purchased my cisco 8851 and I need help setting it up. We do text so im sure you know me its Lawrence. When you can please respond tot he messages iv'e shown you so you could understand more. Thanks
It will ask for those files if the phone has a private key in it. Do a factory reset of the phone by the 123456789 method which is detailed elsewhere and that will wipe the phone and wipe the keys and then it will attempt to pull a non-encrypted version of the tftp files
I am new to it. correct me what understood is that basically you have to run a freebox server and use it's IP address in the XML file to register the phone beside other settings.is there any other way to register just one Cisco phone after converting to SIP firmware without the free-box server?
I am following the same steps in the video for a 7942, and when transferring the files nothing seems to me, only the log indicates that TERM42.defaul.loads was not found. then the phone shows the Cisco logo and does nothing. How can I update this model?
@@bcm50 no, I'm using a Grandstream UCM. In the end I found my way to encourage the customer to change the whole phone line up for a better user experience, so I don't have to configure cisco phones anymore.
Hi, I know this video is pretty old but I'm hoping for a response. I've connected my Cisco 7942G to my computer with a network switch and nothing shows up on the log viewer. I've followed the instructions in the video and nothing happens, even after leaving it for half an hour.
This is great! I however am stuck with some enterprise 8851 on CUCM fw. I was able to use this method to get to the 3Pcc fw but it says I need a migration lic. Any way around this? Trying to get these prov to Zoom and it looks like it’s getting my line info from zoom but can’t make or receive calls and the mig lic warning pop up
No there is no way around this. If the phone was purchased new you would have bought the 3PCC version of the phone if the phone is a used enterprise 8851 then you have to pay Cisco for the migration license. But the migration license isn't that bad it's only around $50. Note that the 3PCC firmware requires a completely different TFTP config file format. Flash it back to the enterprise firmware and it will be fine you can use it with the enterprise xml config
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Hello. I don’t have a ethernet cord or anything. Can I just use a regular power cord and not use ethernet? Would the phone work if it only had the power cord plugged in?
Yes, I got everything working. I have tried a lot of other guides and they all don’t work. But yours does. I do have one question, can I change the wallpaper on the phone?
First of all this video is great! I can't thank you enough. I'm working on setting up a small business and we need a phone system. Question: can the TFTP server be on the free pbx server instead of on a separated computer? Also can the SIP firmware be transferred from the free pbx server instead of a separate computer.
This is like a 2010 programming tutorial video😂 "so what you're gunna wanna do is go ahead and click the folder and go ahead and find the file and now go ahead and reboot the phone"
@@bcm50 I think I have the same problem, I will try to explain better. The phone is not registering to the Free PBX. I have created the extension, but maybe the error is in the PBX configuration of the extension, which you don't show in the video. Can you give some details on that? Thanks!
My phone connects to the server but the phone says error after about 10 seconds any ideas? The tftp server says sendto error 10051: A socket operation was attempted to an unreachable network
@@bcm50 Yes I am using TFTP64 and the phone and server are directly connected with a poe injector The phone just goes to reboot as soon as it starts downloading the files
thanks for the video, i am trying to connect a cisco CP-7962G to a UCM6202 grandstream, i followed your instructions and the phone works, the only problem i have is that when the extensions call to cisco phone, it says unavailable and send directly to voice mail...any suggstions..thanks
Got as far as the xml files, which I can't seem to add successfully. There is no log activity from TFTP after resetting the phone to look for the new host location. Suggestions?
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Is it possible to use the built in TFTP on FreePBX? I was able to flash a 7965 using tftpd but I want the config files to be on the local FreePBX server. I placed them in the tftpboot directory on the server and made sure the services were started and enabled at boot, but the phone remains unprovisioned. Will I need to always flash the configuration file via tftpd (or similar) when registering to FreePBX?
Fixed my issue, but then I was having an error getting my config file to validate - turns out Label's are limited to 12 characters. Changed my label to under 12 and phone is registering now!
The text in the link is correct. There are spaces that have to be included. copy the link and paste in a brower. Make sure you include all of it up to the .zip
Apparently, you need a service contract. I provided the serial number that is on the UP 7965g phone, but the serial number was not found in the CISCO database. Are the files for 7965g SIP and for UP 7962g, available from another location?
Hello, I am following your exact steps, however when i boot the phone up, it says term41.default, it then proceeds to reboot with the bull's eye screen, any ideas
Thank you so much for this. It really works well. However, kindly assist. Mine registers successfully but whenever I dial an extension it just shows reorder and does not call the number. It just stops there
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Ok im stuck at registering... i can see the name in the uper right corner status messages error updating locale dns unknown host tftp error softkeys.xml... i changed freepbx to listen chan sip on 5060 i can register from 3cx soft phone with the extension credentials... am i missing something?
@@bcm50 ok i just change the port to 5160 and it worked. what is not working is the time its 5 hours ahead of time. i used my time zone Eastern Standard don't know if that will be correct
I made this mistake so I figure I'll share incase anyone does the same, but if you're having trouble getting tftpd to work on windows, make sure windows firewall is disabled!
good morning, i uave followed you instructions and my phone did download the SEP.xml files but tftp is looking for the CTLSEP.tlv and the ITLSEP.tlv files. no clue what they are. cisco 7962
@@bcm50 yes my bad i was thinking too fast about plugging directly into the computer like a dumb dumb instead of assigning the IP through the switch that it would still connect to the client XD my brain was fried at that time my apologies.
Great video! As an MSP, we have extensively evaluated various VoIP solutions, including FreePBX, in our quest for excellence. Through rigorous testing, we've determined that Thirdlane Multi Tenant PBX system, coupled with Cisco's IP phones, offers an optimal blend of performance and reliability. Thanks!
So far the best phone programming yet. Will try with my 7960 to convert to SIP, already have files from Cisco to convert but will do provisioning of all phones once hooked to my Free PBX BOX.
Thank you so much, I finally got my Cisco 6941 working. I thought that it was incompatible with SIP & FreePBX but you made it work. The k you so much!!!
Just so you know SCCP is supported within asterisk itself which includes freepbx, it's very much not Cisco only.
I remember watching this for the first time to setup my 7961 with FreePBX. I went from using FreePBX to running a full on CUCM and Unity connection system
Super useful video. Top marks!
Wondering if you can help... my phones are not provisioning. The phone pulls the config file from my TFTP server, but when the phone boots up it continues to list itself as "unprovisioned" without any changes made. Unsure if its to do with my PBX; I'm running FreePBX on VirtualBox with a bridged adapter. My softphones are connecting no problem so I don't think it's routing related. Thanks so much for a great tutorial.
Could you do a tutorial with a Yealink T30?
can you use the latest firmware ?
Your video was spot on. Helped me tremendously.
Thank you!
Glad it helped!
@@bcm50 do you still maintain offline copies of the firmware files? Awesome video thank you!
@@mikeslabolepszy1875 yep, sure do, those links should still be working
Awesome video. Just to ask, have you tried getting these type of phones registered over NAT?
Yes! Works perfectly
@@bcm50 I've been trying to get a 7970 and 7945 to work over NAT and it never works. Would you happen to have a sample XML file I can refer to that works over NAT?
I wish i knew 10% of what you know. You are awesome
Does this work with the Cisco 8800 series?
Thanks a million for sharing your knowledge
Works the same on 7965G Thanks!
Do you have to have your PC on ethernet?
like everyone else here with a 7962 i just can not register it says registering restarting then back to registering
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Same here did you ever figure it out?
@msdos730 no I gave up and found some yealink phones on eBay
This is awesome!! Thank you so much!
will there be more videos related to voip
nice video and a valuable help, thank you
Your welcome!
Hello, great tutorial. Thanks for posting! The link to the XML file is broken.. Is there an updated link at all?
Hi, I can't get past the registering screen on my 7945G. How have you set up your extension in FreePBX?
@I Love Enterprise Gear Hello, I was wondering, can the FreePBX server be hosted in the cloud? Or will the phone not connect to cloud servers? Also, will this method work with 3CX? Thanks.
Yes, Thai will still work for a cloud hosted instance. And yes this will also work for 3CX
@@bcm50 Thank you! I look forward to more of your videos soon!
@@khoinguyenkhoiusa4252 Your most welcome, and thank you!!!!
Looking for some help getting a 7942 to work with Everyday Voip. Following this excellent video has got the phone working with the SIP protocol, now I'm trying to do the configuration file. This is where things seem to differ from Free PBX. Everyday Voip have given me a SIP URL (from which I got the IP address) and a port (5060). Then a username and password for my account. I can't see where in the configuration I can enter the username/password bit. I don't want an extension number, I just want this to be the phone that rings when my VOIP number is called. Any ideas?
I am following the same steps in the video for a 7942, and when transferring the files, nothing seemed to me, only the log indicates that TERM42.defaul.loads were sent.
then the phone shows the Cisco logo and does nothing.
How did you manage to update it successfully?
Can you please re-upload the config files , the given link for that files showing the files not found
Done!
Will these XML files work with the model CP-7965G ?
I am trying to connect this to a Yeastar S20 which extension uses number, letter and 1 capital letter. Is there anyway I can insert such password into Cisco xml file? since I heard it receives only numerical value, not letters..let alone capital letter
Having same issue with Yeastar S100, were you able to figure this out?
Hello, with the help of your video I was able to configure a Cisco 7942 and register it with an Elastix pbx, but I have not been able to configure a Cisco 7962, it remains registered. If you could help me guide me with the configuration file for this model, I would greatly appreciate it. thank you.
How did you transfer the files? They charge me but the phone then only shows the Cisco logo?
Do you have the Firmware for the 7942?
So um what If my phone doesn't have a power plug and I was just planning on using POE?
Yes, that is fine, that will work too!
Set up a VLAN on your switch to isolate a few ports away from your local network. Then you can use the switch as a passthrough for the TFTP transfer of the SIP files with your computer acting as the DHCP server.
can i use a cloud based freepbx with this? i got a 7945g and realized it wont work with 3cx, i cant have external ip address's here, everything is carrier NAT. i tried setting up freepbx locally and my 7945g just says registering an restarts over and over
Can I need to get the firmware download link
hi, i'm having an issue with my 7962, it's not willing to get the files from the tftp server, i joined the discord tho but cannot read or write channels
Hi, I have the same problem with a 7942, can you solve it with your phone?
Phone won’t register at all idk why
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Will this work on the Cisco 7965
Yes it will!
@@bcm50 OK THANK YOU SO MUCH!!!! Do I type in the same numbers for the IP as you?
@@bcm50 Does it have to be in the PC port on the phone?
Can u please upload this but for 3CX?
Message me on discord and I can help you Core#5789
Thank you for the video
Do you plug the ethernet into the PC or Switch port?
Switch port
Awesome video. Do you know if there is a similar XLM config file for the 88xx series phones? Specifically, the 8865. Thanks for your help.
You can use the same XML config file!
@@bcm50 I tried this on my 8811. It keeps asking for the CTLXXX.tlv and ITLXXX.tlv files... which I don't have since , I do not have CUCM. Is there a way to bypass this? the phones are brand new with 11.7
@@bcm50 Hey Laurens. I just purchased my cisco 8851 and I need help setting it up. We do text so im sure you know me its Lawrence. When you can please respond tot he messages iv'e shown you so you could understand more. Thanks
It will ask for those files if the phone has a private key in it. Do a factory reset of the phone by the 123456789 method which is detailed elsewhere and that will wipe the phone and wipe the keys and then it will attempt to pull a non-encrypted version of the tftp files
I am new to it. correct me what understood is that basically you have to run a freebox server and use it's IP address in the XML file to register the phone beside other settings.is there any other way to register just one Cisco phone after converting to SIP firmware without the free-box server?
Yes, by using CUCM or CME
@@bcm50 wish you can add a video for 1 phone
I am following the same steps in the video for a 7942, and when transferring the files nothing seems to me, only the log indicates that TERM42.defaul.loads was not found.
then the phone shows the Cisco logo and does nothing.
How can I update this model?
Guide for the x8xx series phones?
Thank you for your awesome video!! I will try this settings with a Grandstream UCM hoping it works. I will text back with my results.
Sounds good, I wish you luck!
@@bcm50 I tryed your method and the phone its in a loop registering. Maybe something is missing to be provisioned. Any thoughts?
@@elvismateo7022 Could it prehaps be your PBX? Are you US King FreePBX? Did you check the credentials and fail2ban settings?
@@bcm50 no, I'm using a Grandstream UCM. In the end I found my way to encourage the customer to change the whole phone line up for a better user experience, so I don't have to configure cisco phones anymore.
Hi, I know this video is pretty old but I'm hoping for a response. I've connected my Cisco 7942G to my computer with a network switch and nothing shows up on the log viewer. I've followed the instructions in the video and nothing happens, even after leaving it for half an hour.
Do you have discord? If so I, or my community, can help you :)
@@bcm50 yeah, i managed to get past the upgrading screen by myself and now im at the unprovisoned part. what's the discord link?
@@mgferri sweet! Glad to hear you got it working. The discord is in this videos description
This is great! I however am stuck with some enterprise 8851 on CUCM fw. I was able to use this method to get to the 3Pcc fw but it says I need a migration lic. Any way around this? Trying to get these prov to Zoom and it looks like it’s getting my line info from zoom but can’t make or receive calls and the mig lic warning pop up
Any help would be amazing
Any ideas?
Do you have discord, I can help you there?
No there is no way around this. If the phone was purchased new you would have bought the 3PCC version of the phone if the phone is a used enterprise 8851 then you have to pay Cisco for the migration license. But the migration license isn't that bad it's only around $50. Note that the 3PCC firmware requires a completely different TFTP config file format. Flash it back to the enterprise firmware and it will be fine you can use it with the enterprise xml config
I can't register my ip phone,
Help please 🙏
Same here, did you find any solution.
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Is there any other way to configure another cisco model like the 3905?
So I’m the alternate tftp, I would put in my computer (FreePBX) ip address? And when I restart the phone(s) it should be registered
Hello. I don’t have a ethernet cord or anything. Can I just use a regular power cord and not use ethernet? Would the phone work if it only had the power cord plugged in?
Do you have discord, I can help you
@@bcm50 Yes, I have Discord.
@@bcm50 Yes, I have Discord.
@@maddixlee9443 friend me Nortel#0001
Finally a method that works
Yes, I got everything working. I have tried a lot of other guides and they all don’t work. But yours does. I do have one question, can I change the wallpaper on the phone?
First of all this video is great! I can't thank you enough. I'm working on setting up a small business and we need a phone system. Question: can the TFTP server be on the free pbx server instead of on a separated computer? Also can the SIP firmware be transferred from the free pbx server instead of a separate computer.
@@bcm50 Thank you. I don't have the power plug for my phone. I'm using a PoE switch. No worries I'll figure something out.
For some reason my tftp isnt sending to my phone, please help!
Join my discord server, we can help you there discord.gg/wP99ersTcg
This is like a 2010 programming tutorial video😂 "so what you're gunna wanna do is go ahead and click the folder and go ahead and find the file and now go ahead and reboot the phone"
Some people need it that way. You’d be surprised by the supper simple questions I get
Hello, do you know how can I create shortcuts for extensions or phonebook in cisco 7821?
hi I need your help with how to connect the phone with the asterisk server what configuration I will do in asterisk like free PBX
Im confused? How can I help you? All the instructions are in the video?
@@bcm50 I think I have the same problem, I will try to explain better. The phone is not registering to the Free PBX. I have created the extension, but maybe the error is in the PBX configuration of the extension, which you don't show in the video. Can you give some details on that? Thanks!
Thank you so much very appreciated!
My phone connects to the server but the phone says error after about 10 seconds any ideas?
The tftp server says sendto error 10051: A socket operation was attempted to an unreachable network
VLAN and other blocking may be in the way, and just to confirm, your using TFTP64 correct?
@@bcm50 Yes I am using TFTP64 and the phone and server are directly connected with a poe injector
The phone just goes to reboot as soon as it starts downloading the files
Beautiful. Darn, lovely.
Hello
I can't register , it says error locale update
Same here, did you find any solution.
thanks for the video, i am trying to connect a cisco CP-7962G to a UCM6202 grandstream, i followed your instructions and the phone works, the only problem i have is that when the extensions call to cisco phone, it says unavailable and send directly to voice mail...any suggstions..thanks
i have a cisco 7941g and i followed the instructions but only stays in registering and thas all, help please
@@raulclaure4088 i used tcp, not udp
thx a lot , this is a great, but intil 12:30 i was good after it not work
can you help ???
Join my discord server
will this work with the 7040g
How did you select the phone number to be used?
What do you mean?
@@bcm50 what phone number is assigned to you
Will this work with the model CP-7965G ?
Yes, it will!
@@bcm50 Thanks😀
Are there any other ringtones available then the built in ones?
Yes. But you need a active Tftp server to constantly update the phone if you don’t I don’t know any other way.
Hello again, will the cmterm-7941_7961-sip.8-5-2 work?
Yes
Got as far as the xml files, which I can't seem to add successfully. There is no log activity from TFTP after resetting the phone to look for the new host location. Suggestions?
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Is it possible to use the built in TFTP on FreePBX? I was able to flash a 7965 using tftpd but I want the config files to be on the local FreePBX server. I placed them in the tftpboot directory on the server and made sure the services were started and enabled at boot, but the phone remains unprovisioned. Will I need to always flash the configuration file via tftpd (or similar) when registering to FreePBX?
Fixed my issue, but then I was having an error getting my config file to validate - turns out Label's are limited to 12 characters. Changed my label to under 12 and phone is registering now!
may i have the files, the link is broken here
The text in the link is correct. There are spaces that have to be included. copy the link and paste in a brower. Make sure you include all of it up to the .zip
stuck at registration? any idea
Contact me on my discord server, and I, or someone from my community will help you :)
Apparently, you need a service contract. I provided the serial number that is on the UP 7965g phone, but the serial number was not found in the CISCO database. Are the files for 7965g SIP and for UP 7962g, available from another location?
You only need one for the newest firmware. Try downloading one a version back.
love this thank you.
Great video. Cheers!
Does it work with 7940
Yes it sure does!
Hello, I am following your exact steps, however when i boot the phone up, it says term41.default, it then proceeds to reboot with the bull's eye screen, any ideas
Make sure you're using the the right version of the framework, just try to get the most up-to-date version.
Can this IP phone be use at home
Yes!
@@bcm50 can you explain more... please sir
Thank you so much for this. It really works well. However, kindly assist. Mine registers successfully but whenever I dial an extension it just shows reorder and does not call the number. It just stops there
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Do you need to use chan_sip indead of chan_pjsip?
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
Thanks 😍
i'm trying on cisco IP phone 7965 but not successfully register. can you help?
Hello to all the users who are facing issues with registering the Cisco 7941 with FreeBPX 16 and up, create a new SIP[chan_pjsip] extension , 1st in general setting chose a simple 6 digit secret and THE MOST IMP 2nd STEP , go to advance tab and turn these TWO SETTINGS TO NO (Rewrite Contact - No), (Force rport No), by doing these 2 steps it will surely connect.
This is amazing
Ok im stuck at registering...
i can see the name in the uper right corner
status messages
error updating locale
dns unknown host
tftp error softkeys.xml...
i changed freepbx to listen chan sip on 5060
i can register from 3cx soft phone with the extension credentials...
am i missing something?
@@bcm50 ok i just change the port to 5160 and it worked. what is not working is the time its 5 hours ahead of time. i used my time zone Eastern Standard don't know if that will be correct
also i forgot to mention i also disabled NAT on the ext.
@@carlosmcnulty you saved me. Thank you so much!
Mine always say error😢😊
I made this mistake so I figure I'll share incase anyone does the same, but if you're having trouble getting tftpd to work on windows, make sure windows firewall is disabled!
Did anyone have any sucess downloading files using the wayback machine?
Cisco will not let me download the firmware for my 7945 without a service contract. Can someone download it for me?
Join my discord server and I or someone can help you
@@bcm50 BEEEEEEEEAAAAAAAAAAAANNNNNNNNNNNNSSSSSSSSSS>
BEANS>:)))))))))
🤮🤮🤮🤮🤮🤮🤮🤮🤮🥵🥵🥵🥵🥵🥵🥵🥵🥳🥳🥳🥳🥳🥳🥳🥳>:(
HEHEHEHEHEHE🤣🤣🤣🤣🤣🤣🤣
Thank you!
WE ARE SO SORRY WHAT MY BROTHER SAID WE ACTUALLY INSTALLED A CISCO 7942G IP PHONE WE GOT IT POWERED UP BUT WE CANT CALL
Do you need help?
@@bcm50yes
Hi I am using 7942g and the sip firmware has loaded but the xml file is not getting uploaded from the tftp server so what shall I do
Anche tu se non spieghi come è dove vanno collegati i cavi la vedo dura configurare il telefono
Cisco removed support for the 7941, can someone upload the firmware somehow, please?
Same problem here
I cant find discord link at all? good tutorial.
We need Freepbx conf
BEEAAANS
Are you ok?
good morning, i uave followed you instructions and my phone did download the SEP.xml files but tftp is looking for the CTLSEP.tlv and the ITLSEP.tlv files. no clue what they are. cisco 7962
I need folder or firmware pls
👍🏻
I Am having one of the hardest times trying to get my phone 7945 on Tftp. When it loads up, it gives me an error on the phone
Message me on discord Core#5789
😃😃😃😃😃😃
Great set of instructions but you might want to use less "go ahead". That was killing me...
Haha will do
@@bcm50 instructions are very clear and precise!!
@@f1rules555 I’m glad you think so, I will try to work on using “go ahead” less
please add that this wont work for POE phones
This is false, it works for PoE phones, in fact the phone in this video is PoE
@@bcm50 yes my bad i was thinking too fast about plugging directly into the computer like a dumb dumb instead of assigning the IP through the switch that it would still connect to the client XD my brain was fried at that time my apologies.