unfortunately..this version of 288 gto model doesn't include engine... Relatively...I'm quite happy...after all, I know nothing about engines and I'm not very interested....
Absolutely impressive!!! Your work is an inspiration! I have once the Testors Ferrari 288 GTO as a teenager but was lost during moving. Now I am 52 and feel moved to build it again after watching your video. Thanks for sharing!
For me it is also one of the best Ferraris, by design. A good paint job, spectacular how fine and shiny the paint is. Where can you buy those Finisher's paints? I want to try them and they don't export them to my country. I live in Spain. Thanks and regards
thank you very much!!🙂 I got finisher's paints on internet..and I found it's easier to get in Asia.. Mr.color (lacquer base) C series is also a good choice..and they are much more easy to bought in worldwise... cheers!! have a nice day!!😊
Have had the Fujimi version of the 288 GTO recommended to me by fellow hobbyists, completed the 80’s Italeri version earlier this year. Superb results here!
Hi Mr. Lin´s, congratulations ! Beautiful model ! Can you tell me which engraving tool with which blade you used. Many thanks and greetings from Germany
thank you!! the engraving tool is from Mr.hobby GT65 Mr.Line Chisel w/0.3mm and 0.2mm Engraving Blade..they are quite handy.😊 happy modeling and have a nice day.
Hey there! Gorgeous mode you just build! I have a question if i may, when you say thinning ratio, e.g. Is it 1 part thunner and 2 parts of paint? Or the ither way around?
You did it justice! The 288 GTO is also my favorite Ferrari. I have the Fujimi kit but it has an engine and the body is molded in red plastic. I want to paint my yellow and I am not sure how to avoid the bleed through. Thank you for sharing your build, I will for sure use it as reference when I decide to start my 288 GTO. Cheers!
thank you!😄 i think yellow is the good one!! 👍..my kit also include some engine parts,but the instruction didn't mention it...so I pass it!!😝...have fun ,enjoy it!!
I realize this question is 2 years old, but for future reference, pink primer is an ideal undercoat for yellow. It sounds counter-intuitive, I know, but it is the best way to go when painting yellow. Yellow over red would be horrible. Test it out for yourself on scrap plastic first and you will see what I say here is true.
Mr Lin, please can I ask about your primer technique with Mr Surfacer 1200? How many primer coats do you do? Do you do spray mist and wet coats? Thank you.
hi, I spray primer just like paint, but just a bit thinner,I usually make sure the object is totally covered by primer,in normal condition, two layer of them would be fine ..😊
thank you!!😊 the kit's side indicators is a little bit huge to me..so I change it with 3D printed product made by Decalcas..I forgot to mention that in video..Glad you noticed this part!!👍
@@MRLINSSCALEMODELING Wow very very cool, I would never have thought of that. You've done fantastic work of a fantastic car. I'm hoping that you find time and interest in doing the 1/24 Fujimi F40 one day.
@@MRLINSSCALEMODELING Hi, I wanted to ask you if you dilute finisher's with their thinner or something else and what model of airbrush you use. Thank you.
Very very very impressive ! Pity there’s no engine , transmission drive train detail by this model manufacturer, still a beautiful well detailed model you have posted , well done !
I recently bought this kit and it included the engine. Although the manual did not included the engine build, so it was quitte a challenge to build the engine. The parts did not fit that well. The kit also had a seperate trunk and hood.
this kit got some spare parts.they looks like for the engine, some how the instruction dose not mention about it..I don't know why..maybe Fujimi got issues about engine..
thank you!!😊I usually thinning down the paint(about 1 part paint to 3-3.5 part thinner ),lower the air pressure(about 10-15 PSI),and shorten the distance between the object and airbrush..Of course the humidity and temperature of the environment are also key..I will make "tips and tricks"videos to discuss tools and skills I used in future...stay tuned 😊
![[Full build] Ferrari 288 GTO 1/24 - Car Model (Fujimi)](http://i.ytimg.com/vi/i0aHrUgTY1o/mqdefault.jpg)
great step by step explanations, thank you
thank you very much!!😊
the gap on the quarter window is necessary. It’s an hidden air intake for engine cooling. As on the subsequent Evoluzionne and F40. wow build! kudos!
thank you for the info ☺️
Your work is 1st class. Beautiful.
Why did you not build and install the engine and turbochargers?
unfortunately..this version of 288 gto model doesn't include engine...
Relatively...I'm quite happy...after all, I know nothing about engines and I'm not very interested....
There is nothing more satisfying as removing masking on a car or aircraft model kit and seeing how great it looks
thank you!! 😊
Stunning. Looks like a real car.
Thank you very much!!😊
Absolutely impressive!!! Your work is an inspiration! I have once the Testors Ferrari 288 GTO as a teenager but was lost during moving. Now I am 52 and feel moved to build it again after watching your video. Thanks for sharing!
thank you very much!!😄
Excellent video and job building and painting your Fujimi Ferrari 288 GTO!
thank you very much!😄
Funny, how much cool tricks I learned from this video! Great build, Chapeau!
thank you for watching!!😊I am glad my video is useful..😊
Your work on paint the trim is incredible. Thanks for sharing.
thank you very much my friend!😊
Wow, you are a god with your airbrush. Wonderful work 👍👍
Thank you very much!!
A great build of such an iconic car. Great work. 👍 ATB, John.
Thank you very much!!😄
Thank you so much for sharing your build! I certainly do like it!
thank you very much!!
Another fantastic model, as always I learned so much from your skill. Looking forward to the next one.
much appreciated😊 thank you for supporting from the beginning till now..stay tuned,working on next project!! 😄
For me it is also one of the best Ferraris, by design. A good paint job, spectacular how fine and shiny the paint is.
Where can you buy those Finisher's paints? I want to try them and they don't export them to my country. I live in Spain. Thanks and regards
thank you very much!!🙂
I got finisher's paints on internet..and I found it's easier to get in Asia..
Mr.color (lacquer base) C series is also a good choice..and they are much more easy to bought in worldwise...
cheers!! have a nice day!!😊
Beautiful work. I have this one in my to build pile and this is a huge inspiration. Your work is always amazing.
thank you,I feel this kit is not so hard...have fun!!😊
Perfection! Ferraris are not my favorite subjects but now I want to build this one.
thank you!this kit is easy to build, somehow not easy to get.. hope you get it and enjoy it!!😊
Really beautiful Ferrari!
thank you my friend!!😊
Outstanding Build!!
thank you very much!😄
Have had the Fujimi version of the 288 GTO recommended to me by fellow hobbyists, completed the 80’s Italeri version earlier this year. Superb results here!
thank you very much!!😊
Great build. What is that u use to dispense the glue
thank you!!😊
the tool is a P.E set for apply C.A glue(you can search hobby web store for it ),I made some custom of it... a handy tool!!😄
Stunning work, always is. I’ve got the Fujimi 250GTO to build, if it comes out a tiny fraction of how good this is I’ll be happy, beautiful.
Well done.
Congratulations.
thank you very much!!😊
Where did you get the Ferrari 3d decals please, I've looked everywhere for them 😔
I liked the seatbelt detail. You could be in Scale Auto Enthusiast with details like that. 3D decals.. new one for me. Look great.
thank you very much!!😊the decal I used got a thick clear resin coat on it, so it looks shiny and more three-dimensional..I like this effect 😄
Hi Mr. Lin´s, congratulations ! Beautiful model ! Can you tell me which engraving tool with which blade you used. Many thanks and greetings from Germany
thank you!!
the engraving tool is from Mr.hobby GT65 Mr.Line Chisel w/0.3mm and 0.2mm Engraving Blade..they are quite handy.😊
happy modeling and have a nice day.
Absolutely stellar.
thank you very much!!😊
Love your work, really clean!
thank you very much!!😊
Amazing build. I was wondering where do you get your aftermarket stuff at?
thank you!!😊
there are a lot of these aftermarket stuff on web store..take you time..you will find something very useful...
Excelente trabajo!
Muchísimas gracias!!😊
Hey there! Gorgeous mode you just build! I have a question if i may, when you say thinning ratio, e.g. Is it 1 part thunner and 2 parts of paint? Or the ither way around?
thank you!😊
thinning ratio 1:3 means 1part of paint:3parts of thinner and so on...
You did it justice! The 288 GTO is also my favorite Ferrari. I have the Fujimi kit but it has an engine and the body is molded in red plastic. I want to paint my yellow and I am not sure how to avoid the bleed through. Thank you for sharing your build, I will for sure use it as reference when I decide to start my 288 GTO. Cheers!
thank you!😄 i think yellow is the good one!! 👍..my kit also include some engine parts,but the instruction didn't mention it...so I pass it!!😝...have fun ,enjoy it!!
@@MRLINSSCALEMODELING :-) Thank you!
I realize this question is 2 years old, but for future reference, pink primer is an ideal undercoat for yellow. It sounds counter-intuitive, I know, but it is the best way to go when painting yellow. Yellow over red would be horrible. Test it out for yourself on scrap plastic first and you will see what I say here is true.
Amazing, at first I thought you made a mistake by coloring the windshield pillars black, but then I saw they really are black on the 288 GTO.
Thank you very much!!
Great work!
thank you very much!!😊
Wow perfect build looks like die cast as usual ...no fitting chassis and body issue only on this fujimi model??
thank you!😄building this kit is much easier than the 246 GT..take your time, it would be fine😊
8:11 there's some white appeared on the painting... incredible, it disappeared with the next step!
master craftsman
thank you very much!!😊
B pillar window is open, to allow air to engine.
Mr Lin, please can I ask about your primer technique with Mr Surfacer 1200? How many primer coats do you do? Do you do spray mist and wet coats? Thank you.
hi, I spray primer just like paint, but just a bit thinner,I usually make sure the object is totally covered by primer,in normal condition, two layer of them would be fine ..😊
Can I please ask how you made the side indicators?
Awesome build as ever!
thank you!!😊 the kit's side indicators is a little bit huge to me..so I change it with 3D printed product made by Decalcas..I forgot to mention that in video..Glad you noticed this part!!👍
I find your dry coat/wet coat technique very very interesting. Do you dry coat so that the wet coat has something to grab and doesn't run ?
Thank you!!😄yes, that is exactly what I try to do.. 😊
@@MRLINSSCALEMODELING Wow very very cool, I would never have thought of that. You've done fantastic work of a fantastic car. I'm hoping that you find time and interest in doing the 1/24 Fujimi F40 one day.
How do you take the tape residue off?
HI,usually I clean it with some TAMIYA X-20 thinner,sometimes I use 75% Ethanol
This will always be my 2nd favorite Ferrari right behind the F40.
Thank you very much!!😄
i own the same kit too, a super car both in 1/24 and 1/1 🙂
an old kit,but pleasure to build!!
You did a great job, just should open the air vent on the rear, apart from that, perfect
thank you very much!!😄 about the rear vent..I thought about that... I feel it's too diffcult for me..😅..maybe next time..
have a nice day!!
Hi, really well done! Where are you from and where do you buy finisher's paints? I have not found them in Europe. Thank you
Hi,I am from Taiwan, I got these paint on my local model shop and some web store, they are easy to get in Asia..
@@MRLINSSCALEMODELING Hi,
I wanted to ask you if you dilute finisher's with their thinner or something else and what model of airbrush you use. Thank you.
Very very very impressive ! Pity there’s no engine , transmission drive train detail by this model manufacturer, still a beautiful well detailed model you have posted , well done !
thank you very much!!😊
Excellent
thank you very much!!😄
Sooooooo nice one of my favorite Ferraris also
thank you very much!😄
Very nice.
thank you !!😄
ООО какая красотка получилась👍👍👍👍👍
большое спасибо😊
Awesome paint. It looks like that kit would allow for an engine to be installed. Did Fujimi offer an engine kit for it?
I recently bought this kit and it included the engine. Although the manual did not included the engine build, so it was quitte a challenge to build the engine. The parts did not fit that well.
The kit also had a seperate trunk and hood.
this kit got some spare parts.they looks like for the engine, some how the instruction dose not mention about it..I don't know why..maybe Fujimi got issues about engine..
Where can i get the decal set
try search "custom model car decal" there are many of them
實在太精彩👍
非常感謝!!😊
Well done. The headlights look kinda bad. Apart from that, nice!
Thank you!!
FIANL?
what is the length of the wheelbase in millimeters? thanks.
Hi,about 100 mm
@@MRLINSSCALEMODELING thanks
So hard to find this kit
yes, it is an old kit and not easy to get...😅
Excellent project! Btw, just want you to share how to avoid rough surface when air spray painting? Is the thinner not enough ?
thank you!!😊I usually thinning down the paint(about 1 part paint to 3-3.5 part thinner ),lower the air pressure(about 10-15 PSI),and shorten the distance between the object and airbrush..Of course the humidity and temperature of the environment are also key..I will make "tips and tricks"videos to discuss tools and skills I used in future...stay tuned 😊
@@MRLINSSCALEMODELING many thx for your sharing and look forward to your coming video
👍
Thank you!!😄
Salut my friend super car super video subscribe subscribe
Thank my friend subscribe subscribe
thank you very much!!😊
@@MRLINSSCALEMODELING ok my friend subscribe subscribe
Makes me feel guilty for what I did to my Testarossa model
No engine 🤔
it is pitty this version of 288 gto model doesn't include engine...😔,fujimi got another version which included engine...I can't find it...
Stunning build!
thank you very much!!!!😊