Ways for your reference ➤ 1: Find ahead from an old cassette and follow the instructions in the video: 1:32 ➤ 2: Solder the output of the Bluetooth circuit directly to the magnetic head. Remove the ic preamplifier from the circuit, then look up the ic pin connector on the input signal and output signal pins: 15:45 ➤ 3: Connect the signal wire directly to the circuit board at the output pins: 25:23 ➤ Thanks for watching and supporting my channel! Please like, share leave a comment to help me do better videos. ➤ Ways To Convert Mp3 Bluetooth For Old Radio Cassette Tapes: th-cam.com/video/I-Co-GCM1UQ/w-d-xo.html♥ ➤ How to make Bluetooth for old Cassette SHARP GF 319: th-cam.com/video/qKIsGPlDf5Y/w-d-xo.html😊
Very good video (except lack of voice over)all the tricks are revealed on a single video. Congratulations..... good job keep it up expecting more simple and useful videos
У меня точно такой же магнитофон, не работало радио, подпаялся к микросхеме радио и вывел аукс наружу, вышло очень даже эстетично и остались работать режим CD и касеты! модуль вывел в крышку касеты, он там как и был, даже вставлять касету не мешает!
I have the same radio estereo. One day, a electronic technician tried to put the same Bluetooth... There was a problem with audio quality and he took it off. So After watching this video, I think I'm going to install by myself! 😂
Just put 3 way switch for BT function as an additional locate the input of the tone control then then cut for BT and from radio and cassette then connect....this method is just upgrading the old radio cassettes player
Gracias ! Me dio una idea para instalar un modulo interno de bluetooth. Estaba buscando para q ande el mando del volumen del radiograbador con el modulo bluetooth. Gracias x el video
la forma mas facil es soldar directamente los cables de audio sin los cristales y remover definitivamente la casetera y juntar los circuitos de encendido y de audio mediante un interruptor para ya no usar el teclado y que todo el sistema funcione mejor y con mas espacio gracias
These old sony boom boxes are no longer produced and to be treasured in my opinion... We could just used the LINE-IN (if available) and connect the other unit that provides BT, USb etc... I saw so many videos where people are modifying...sometimes very rare and great-looking vintage systems with these cheap BT boards.... just my thought...
Couldn't you just tap the line output from the preamp chip? Then you can play tapes as well as bluetooth. not at the same time I don't think. If you put an audio out jack on that same line you could maybe dub your tapes to PC. I have an old CB radio that I modded like this and you could record what was on the CB as well as play audio through it.
So how was it all put together in the end? The only problem with this mod is you can no longer play cassettes. It's great to add Bluetooth to an old boombox but not so great to take away some of its original functionality like not being able to use a cassette deck anymore.
You can always just solder the power cables of blt mod to the ones of the motor, without removing it from it. If you have a Cassette player with two slots, even better.
Hola, yo hice la instalación de ese modulo anulando la radio y conecte los cables de sonido del modulo a los cables de salida de la radio hacia el ampli......además de conectar el cable de la antena del modulo al de la radio, por lo que vuelvo a tener radio y todo lo demás que ofrece el modulo, lo alimento con un cargador de móvil conectado al cable de alimentación del radiocasette... de momento va de lujo.....espero no me de problemas pues no tengo mucha idea de electrónica ....
I got me a radio just like that for Christmas in 1995 when I was 12. I don't remember how long I had that radio. I think it was from Christmas 1995 - Mid 1998.
I think the signal level what the head produces and the one what the BT unit is not the same. If signal of BT is much higher than the head signal then you can have distortion as the preamp imput signal is adjusted to receive lower signal from head. If you noticed he bridged the preamp in/out completely when he soldered directly the BT output to the head wires (option 2) by this feeding directly the BT out to the power amp ic excluding preamp. What i see issue in these builds is the background noise, the whining you hear as soon as the BT unit is started. That's because of the ground loop. He used power to BT unit from the motor of the tape. He should use an isolated dc to dc converter or a separate psu for the BT module.
Теперь кассета не нужна, вместо них будет использоваться флеш-карта или карта памяти,но Вы могли бы сделать такой магнитофон,в котором будет установлен модуль для флеш-карты и с него можно будет переписывать на кассету,таким образом Вы сможете возродить магнитные кассеты(Ваш доброжелатель Андрей Потаповъ).
I tried 2nd and 3rd method on my Philips player, removing AN7323 pre-amplifier, but in both cases i get an abnormal noise which disappears only if i disconnect the output connector from the board. How can i solve this problem ?
I found that the problem is related with the 12V source i use to power the board : if i use an external power supply all is good while when i try to use the tape motor source, as in the video, than the noise is present. I'd definitely prefer the latter solution but without noise... any suggestion ?
some friendly advice about your videoing 1. your videos are too long they should be less then 10 minutes 2. get rid of the over head camera we only need to see you soldering once. 3. try to explain what your going to do using before and after photos even diagrams 4. showing web sites is good what you are buying and what you are paying 5. I think your connecting into the speakers into the cassette player start button and I guess into the power somewhere but its hard to follow 6. drawing arrows and circles on your images is also good if you can. 7 Try slow and reflective music sometimes. Updating old machines is fun to watch and makes me feel good, even if I don't ever want to do it. You should be getting more subscribers then you are maybe this advice will help 👌
Dear Clark, the bluetooth module's audio outputs are already preamplified, that's the reason the preamplifier IC was deleted while the inputs and outputs were jumpered (bypassed) to have a continued audio signal path into te rest of the circuitry. Kind regards from Mexico amigo!!!
Porque ele nao ligou as saidas do modulo diretamente nos fios da cabeca do tape ? Assim nao precisaria desmontar e montar tantas vezes ! Depois era so pegar os 12 volts dos fios do motor! A nao ser que ele queria mostrar passo a passo a montagem!
merhaba videonuz çok güzel bana fikir verdi . aynı teypten bendede var .bendekinin çıkış entegresi LA4597 giriş 2 ve 6 gözüküyor aynı şekilde bağladım ama volumeanahtarı devre dışı ses çıkyor ama sesi kısamıyorum ve çok uğultulu ne yapabilirim .teşekkürler
Nice video and presention .. I have a doubt if we using mp3 decorder module with Bluetooth connectivity the use of tape-head connection is necessary?.. sir please clarify... Which audio player app in your mobile phone was shown in the video...
I really liked the music you played right at the start what was that? Traditional Cantonese? I feel this mod isn't complete unless you somehow incorporate the module physically however, that is, fixed into the casing.
Here how to make you how to connect a Bluetooth board to an old cassette player, you can watch my other videos that are fixed board Bluetooth to the case. thank you
My brother shake care creative we are inspired to your restoration radio,tape recorder but original transiter out put input can available in spare part and where you can acquire can you help . I have Bush baron two band radio. Can you restoration I give you money .I am from Wardha ,city near Nagpur in Maharashtra. Thanku.
@@ShareTechCreative Please help me , check the BA3420BL datasheet , I removed it ، As I said mp3 player is working but old radio in not working , I connected pins 5 and 13 to the mp3 player input and don't have any voice
Sir I performed it at home with regulator ic 7805 and bluetooth kit, but when i conected audio input to the tap recorder amplifier it was to much noise in speaker. I conected audio input with head wires. This problem was out my knowledge why is this so. Sir kindly guide me what is problem.. Thanks
256 / 5.000 Çeviri sonuçları hello, your video is very good, it gave me an idea. I have the same tape recorder. The output IC of mine is LA4597 inputs 2 and 6, I connected it the same way, but the volume key is disabled, the sound comes out, but I can't turn the volume down and it's very buzzing, what can I do. Thank you
Ways for your reference
➤ 1: Find ahead from an old cassette and follow the instructions in the video: 1:32
➤ 2: Solder the output of the Bluetooth circuit directly to the magnetic head. Remove the ic preamplifier from the circuit, then look up the ic pin connector on the input signal and output signal pins: 15:45
➤ 3: Connect the signal wire directly to the circuit board at the output pins: 25:23
➤ Thanks for watching and supporting my channel! Please like, share leave a comment to help me do better videos.
➤ Ways To Convert Mp3 Bluetooth For Old Radio Cassette Tapes: th-cam.com/video/I-Co-GCM1UQ/w-d-xo.html♥
➤ How to make Bluetooth for old Cassette SHARP GF 319: th-cam.com/video/qKIsGPlDf5Y/w-d-xo.html😊
P
ั้ั้ั้ั้ั้ั้ั้ั้ั้ั้ั้ไันเั้ั้ั้ั้ั้ันเหัไ้ำพัั้ำเลีำเเักเพะำกวไั้ำ
Mantap
Is 7805 on your blutooth module break
08h30
Very good video (except lack of voice over)all the tricks are revealed on a single video. Congratulations..... good job keep it up expecting more simple and useful videos
Sorry for that
I'm prefered a number 1 trik, it's no make damage the tape recorder, and it's simple too Thanks for tutorial..God bless you
Main bhi try karunga isi liye ye video dekha hai aise work me mujhe bahut jyoda interest hai thanks sir
У меня точно такой же магнитофон, не работало радио, подпаялся к микросхеме радио и вывел аукс наружу, вышло очень даже эстетично и остались работать режим CD и касеты! модуль вывел в крышку касеты, он там как и был, даже вставлять касету не мешает!
Very great. Thank you so much 😊
Вот приличное решение!!!!
Buen video¡¡¡¡ me sirvió de mucho. Para un minicomponente que no tiene auxiliar. Para adaptar bluetooth.
Excellent sir,.. 👍
Keep watching
Wow amazing bro .very helpful and thanks for ur hardwork
W
Excellent sharing dude! Thanks you so much.
Glad you enjoyed it!
Grade work brother. Good think. U can diswah tape missan and fixed usb kit with on off switch.
Thank u...
இது நல்ல வேலை...
Great and Good Job Master, from the Philippines
Thanks! 😃
Good job Man, greetings from Romania !!!
Thanks
Nice work bro, congratulation !
It's Amazing idea my friend
Thank you so much 😀
I have the same radio estereo. One day, a electronic technician tried to put the same Bluetooth... There was a problem with audio quality and he took it off. So After watching this video, I think I'm going to install by myself! 😂
Thanks for sharing. Good luck
Old is gold, company should start manufacturing again.
Bạn thuyết minh chia sẻ thì mọi người sẽ dễ hiểu hơn . cảm ơn bạn vì video hay
Thanks
Just put 3 way switch for BT function as an additional locate the input of the tone control then then cut for BT and from radio and cassette then connect....this method is just upgrading the old radio cassettes player
Gracias ! Me dio una idea para instalar un modulo interno de bluetooth. Estaba buscando para q ande el mando del volumen del radiograbador con el modulo bluetooth. Gracias x el video
Its my best video about bluetooth module Can make a video how to install on dvd player and car radio thanks in advance
Thanks I've done this but by just connecting two wires to existing head to car audio cassette head nice work.
Nice work!
Can we connect it to a 5v Bluetooth decoder device
@@raajkumar779 idont know about a decoder. my source was just audio going to tape head
Nece video my friend...good job thank you for sharing👍👍👍👍🙏🙏🙏🙏
la forma mas facil es soldar directamente los cables de audio sin los cristales y remover definitivamente la casetera y juntar los circuitos de encendido y de audio mediante un interruptor para ya no usar el teclado y que todo el sistema funcione mejor y con mas espacio gracias
Opino lo mismo
0:19 Hermosa musica, inspira confianza. ¬.¬
Such a nice video by a genius.Thank you.
9th
Always a good project
Thank you
Love it so much from Vietnam.
Thanks
These old sony boom boxes are no longer produced and to be treasured in my opinion... We could just used the LINE-IN (if available) and connect the other unit that provides BT, USb etc... I saw so many videos where people are modifying...sometimes very rare and great-looking vintage systems with these cheap BT boards.... just my thought...
vary nice video.thank u
Esse cara é um gênio nas tecnologias 👏🏼👏🏼👏🏼👏🏼👏🏼🇧🇷🇧🇷🇧🇷
Thanks and welcome
@@ShareTechCreative Você mora na Inglaterra?
Não, eu estou em outro país
@@ShareTechCreative Você está qual país?
Eu sou brasileiro.
Boa noite!
Good video, thank you. One question: what is the bridge you made at the back?
Couldn't you just tap the line output from the preamp chip? Then you can play tapes as well as bluetooth. not at the same time I don't think.
If you put an audio out jack on that same line you could maybe dub your tapes to PC. I have an old CB radio that I modded like this and you could record what was on the CB as well as play audio through it.
Very nice video 👍
Thanks for visiting
So how was it all put together in the end? The only problem with this mod is you can no longer play cassettes. It's great to add Bluetooth to an old boombox but not so great to take away some of its original functionality like not being able to use a cassette deck anymore.
You can always just solder the power cables of blt mod to the ones of the motor, without removing it from it. If you have a Cassette player with two slots, even better.
It was a challenge putting it back together but nice video
nice video my friend, thank you for sharing
Hola, yo hice la instalación de ese modulo anulando la radio y conecte los cables de sonido del modulo a los cables de salida de la radio hacia el ampli......además de conectar el cable de la antena del modulo al de la radio, por lo que vuelvo a tener radio y todo lo demás que ofrece el modulo, lo alimento con un cargador de móvil conectado al cable de alimentación del radiocasette... de momento va de lujo.....espero no me de problemas pues no tengo mucha idea de electrónica ....
Very well explained. Thank you so much
Roop Wala
Thank you for visiting, wish you success
Hola excelente video !!! pero mi duda es , si es necesario dejar el cabezal ? Desde ya muchas gracias
It would be great if you explain every step with your voice
very simple method....audio output connect FM...input.....best sound
Many many thanks
You are really amazing ....and well explained
Devassy Varthu
Thank you for watching the video and for supporting
I got me a radio just like that for Christmas in 1995 when I was 12. I don't remember how long I had that radio. I think it was from Christmas 1995 - Mid 1998.
what is this app for listening to music he used ??? I was curious 😁✌️
casse-o-player
*Why need to connect via two headtape? Just connect three wire together directly!*
u r right .waste fellow
I think the signal level what the head produces and the one what the BT unit is not the same. If signal of BT is much higher than the head signal then you can have distortion as the preamp imput signal is adjusted to receive lower signal from head. If you noticed he bridged the preamp in/out completely when he soldered directly the BT output to the head wires (option 2) by this feeding directly the BT out to the power amp ic excluding preamp. What i see issue in these builds is the background noise, the whining you hear as soon as the BT unit is started. That's because of the ground loop. He used power to BT unit from the motor of the tape. He should use an isolated dc to dc converter or a separate psu for the BT module.
gostei. Só que não entendo muito bem de eletrônica. Qual das três demonstrações seria o correto para a ligação?
Ninguna es correcta. Va a gusto de cada uno.
thanks man
No problem!
Hi was this piece that you removed from the cassette a recording amplifler
Yes, it is
Теперь кассета не нужна, вместо них будет использоваться флеш-карта или карта памяти,но Вы могли бы сделать такой магнитофон,в котором будет установлен модуль для флеш-карты и с него можно будет переписывать на кассету,таким образом Вы сможете возродить магнитные кассеты(Ваш доброжелатель Андрей Потаповъ).
Supper bro
muy bueno!
I tried 2nd and 3rd method on my Philips player, removing AN7323 pre-amplifier, but in both cases i get an abnormal noise which disappears only if i disconnect the output connector from the board. How can i solve this problem ?
I found that the problem is related with the 12V source i use to power the board : if i use an external power supply all is good while when i try to use the tape motor source, as in the video, than the noise is present. I'd definitely prefer the latter solution but without noise... any suggestion ?
Nossa que vídeo ótimo
Thanks
@@ShareTechCreative you are welcome
Where can I buy one of these.
I have a Blaupunkt cd50 I would like to add aux and usb to it.
You find the store closest to you or buy online
I have Jameson js-4usb auto tape converter usb/tf/fm/aux bluetooth I connected it to amplifier that u gave me. Thank you
That is awesome!
Good work
some friendly advice about your videoing 1. your videos are too long they should be less then 10 minutes
2. get rid of the over head camera we only need to see you soldering once. 3. try to explain what your going to do using before and after photos even diagrams 4. showing web sites is good what you are buying and what you are paying 5. I think your connecting into the speakers into the cassette player start button and I guess into the power somewhere but its hard to follow
6. drawing arrows and circles on your images is also good if you can. 7 Try slow and reflective music sometimes.
Updating old machines is fun to watch and makes me feel good, even if I don't ever want to do it.
You should be getting more subscribers then you are maybe this advice will help 👌
Thanks for all your advice. I will try to fix for the upcoming videos
i
21:15 would u mind explaining what u did there? why those jumpers? and why did u removed preamp IC? Is it not needed?
Dear Clark, the bluetooth module's audio outputs are already preamplified, that's the reason the preamplifier IC was deleted while the inputs and outputs were jumpered (bypassed) to have a continued audio signal path into te rest of the circuitry. Kind regards from Mexico amigo!!!
@@raulconve6841 Thanks
Porque ele nao ligou as saidas do modulo diretamente nos fios da cabeca do tape ? Assim nao precisaria desmontar e montar tantas vezes ! Depois era so pegar os 12 volts dos fios do motor! A nao ser que ele queria mostrar passo a passo a montagem!
I'm looking good quality I want to convert old cassette tape to in CD or mp3 . Where from I buy can you send me link plz
Fantastic
Thank you so much 😀
merhaba videonuz çok güzel bana fikir verdi . aynı teypten bendede var .bendekinin çıkış entegresi LA4597 giriş 2 ve 6 gözüküyor aynı şekilde bağladım ama volumeanahtarı devre dışı ses çıkyor ama sesi kısamıyorum ve çok uğultulu ne yapabilirim .teşekkürler
nice video thanks
Thank you for visiting my channel
Which music player did you used in this video in your mobile?
want this for my JVC BOoMbLASTER ;D like this
Can we connect the input of 12V DC to a 5v Bluetooth decoder device. The specifications say its 5V/12V. I don't understand this. Please explain.
Thanks you!!!
You're welcome!
Nice video and presention .. I have a doubt if we using mp3 decorder module with Bluetooth connectivity the use of tape-head connection is necessary?.. sir please clarify... Which audio player app in your mobile phone was shown in the video...
Casse-o-player in google play
Kinda, is useful for cassettes??, also he coud soler wires straight to the head/board just follow the wires.
Nic u menc sir g
Oh Good job
Thank you
Thank you very much
YA
8
A voice over or explantion may be more helpfull for uderstand the video for bigners please do it.
Very super
Thanks for visiting
@@ShareTechCreative it's ok. Congrats bro
helo thanhkyou ban
Sound clarity good or not in first trick?
Yes it's very good, you should try them!
Buenos dias y la modulación de radio sigue funcionando .pude seguir amplificación normal de sintonía de emisoras , el.preamplificador 🤔 gracias
And when the head has 5 pins connection. How do you know which ones are the chanels to conect?
I really liked the music you played right at the start what was that? Traditional Cantonese? I feel this mod isn't complete unless you somehow incorporate the module physically however, that is, fixed into the casing.
Here how to make you how to connect a Bluetooth board to an old cassette player, you can watch my other videos that are fixed board Bluetooth to the case. thank you
It’s not cantonese! It’s another Chinese dialect!
My brother shake care creative we are inspired to your restoration radio,tape recorder but original transiter out put input can available in spare part and where you can acquire can you help . I have Bush baron two band radio. Can you restoration I give you money .I am from Wardha ,city near Nagpur in Maharashtra. Thanku.
In the video I saw that it is possible to connect the bluetooth sign on the tape drive. Is it possible to connect this bluetooth sign on the CD drive?
Your information is very good, but it is difficult to do with non-professional people
Instalei uma igualzinho, porém não aparece bluetooth nem pendrive em mode, coloco pendrive e já roda, mas bluetooth nada
Hebat 👍👍👍
Como comprar ese aparato,en Panamá no lo venden y no quiero desacerme de mi equipo.
Dear Sir
Could you please provide a link to the Bluetooth Decoder Board so we can buy the same,
Thank you.
Links for your reference
bit.ly/2T9mlzP
Cải lương huyền thoại kkk
0:20 nước ngoài có bài cải lương của người Việt 😂😂😂😂😂
Nước ngoài cx bik nghe cải lương mà :)))))))
Người việt nam đó
I have stereo output from my bluetooh device. Left ,ground and right. But I have mono speaker with la4192 pre amplifier.. How can I connect
You connecting left and right together
Where did you get the MP3 player app on your cell ?
casse-o-player in google play
মটু আর পাতলু কি জরি কি জরি আগেছবি উছদূ আমার
Hi , I do the third method ( removed pery amp ic : BA3420BL ) , mp3 player is working but old radio is broke and not work , what can I do ?
You carefully check the points you have made to see if there are mistakes! and you remove IC BA3420BL does not affect the Radio circuit part. Thanks
@@ShareTechCreative Please help me , check the BA3420BL datasheet , I removed it ، As I said mp3 player is working but old radio in not working , I connected pins 5 and 13 to the mp3 player input and don't have any voice
Como se llama tu reproductor de música de cassettes ? Excelente video.
Yo tampoco lo recuerdo!
casse o player
yo he puesto y conserve el funcionamiento del casette original mas el usb la radio y todo... esta bien este igual pero perdiste el casette . saludos
Sir I performed it at home with regulator ic 7805 and bluetooth kit, but when i conected audio input to the tap recorder amplifier it was to much noise in speaker. I conected audio input with head wires. This problem was out my knowledge why is this so. Sir kindly guide me what is problem..
Thanks
You can provide your own power adapter
Hay qua 👍🌷🛎 mong hợp tác lâu dài
thilua Nguyen
Ok thank you
Blutoth k set karne k bad kya ham radio bhi sun sakte hai????????aisa redio mere pass bhi hai
256 / 5.000
Çeviri sonuçları
hello, your video is very good, it gave me an idea. I have the same tape recorder. The output IC of mine is LA4597 inputs 2 and 6, I connected it the same way, but the volume key is disabled, the sound comes out, but I can't turn the volume down and it's very buzzing, what can I do. Thank you
Name of your music player? I like it
Hai ...frend..nyimak gan
Video xem thay roi qua de nghi ad nhanh khac phuc
0:33 please tell me what music is that
Another..... idea
Connect radio input.... for best sound quality
No vídeo vi que é possível ligar a plaquinha bluetooth no drive de fita tape. É possível ligar essa plaquinha bluetooth no drive de CD?
Si, se puede. Es más complejo. Pero igual se puede.