ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
The Kewtech KT65DL | Multi Function Tester. (42)
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- In this video I give a basic run through of my test equipment and the various bits I've picked up and added to it over the years.
Although this isn't all the test equipment the average spark is required to have in their arsenal, it's the core ingredients of a testing kit in a domestic capacity.
The Kewtech bag that came with the meter is a square zip up bag that I thought could do with reinforcement, hence the absolutely awesome Magnusson tool case. It can be found in B&Q and Screwfix for around £25-£30. Thanks for watching.
Check out the Kewtech website for all information on this and many other products-
www.kewtechcor...
The Kewtech TH-cam channel-
/ kewtechcorp
Where I bought my meter from-
www.test-meter...
To pick up the Magnusson tool case click the link below-
www.screwfix.c...
Other TH-cam sparks using Kewtech equipment-
CJR ELECTRICAL / @cjrelectrical
Giffords Electrical / @giffordselectrical
THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY AND NOT TO BE TAKEN AS ANY KIND OF TRAINING OR EDUCATIONAL PRESENTATION. AT ALL TIMES I AM IN FULL CONTROL OF THE INSTALLATION AND THERE IS NEVER ANY RISK TO PERSONS OR EQUIPMENT. ELECTRICITY SHOULD BE GIVEN THE FULL RESPECT IT DESERVES.
#tester #kewtech #electrician
He’s back 🙌🙌🙌
There's something hidden in the background for you Mr B. Someone said it's the rule nowadays to mention you in every TH-cam video? I thought I'd do it discreetly 😉👌.
Not a pack of flexi con ?! 😆
@@JBE The Smash Hits 98 CD replete with Barbie Girl by Aqua, The Backstreet Boys, Steps (5, 6, 7, 8) and none other than Will Smith "Getting Jiggy Wid' It"! Yes, a Bundy bonanza of tuneage!
@@dsesuk Well spotted Mr Savery! I get it spinning sometimes when I'm working in there. Some absolute classics on this double disc compilation 👌. I think Nick was about 5 when this came out?
Nice to see you back Mr Beck👍. Nice video
Nice to see you back big fella. Looking good for someone who's gone through lockdown on pot noodles. 👍
And Gin 👍
Thanks James, you've convinced me to buy the Kewtech lamp adaptor set, spent to much time upside down on a pair of steps trying to get all 3 probes on terminals 😆
I have the exact same meter and case. I got the case after watching one of your vids. I have the same bits and bobs inside the case plus batteries and torque screwdriver. Keep them coming James and glad you've kick started the channel again!
Can't beat this case it's a rock!
Welcome back😊
I love my kewtech KT65dl a lot easier than my meggar.
A great tool that does what it does and you don’t have to have a masters in physics.
Top vid James, really good to see your back putting out quality content again. Look forward to more in the near future👍
James, excellent video.
Thank you for making the effort and taking the time to make it. Rest assured, it really is appreciated.
Albert in Ireland.
Hey cheers Albert!
Thank you. As an adult learner this is very useful and I'm looking forward to the "mock" EICR. Great rig by the way!
I'll finish it when I get time and get some more tests done on it.
Great to see you back mate! These are great testers, don’t get enough credit in my opinion I’ve got a KT64 and a a Megger 1720 and I prefer my Kewtech, it’s such an easy to use little tester and never let me down. The RCD Results on one page are so handy. The light mate kit is great for EICRs👌🏻👍🏻👏🏻
Nice to see you back was wondering where you had gone. I have used the Kewtech 63 since I started some years ago. I found Alan at Kewtech help line very help full as there were no videos a few years ago. I'm thinking of up grading my MFT to the Kewtech KT65DL, so thanks for running through it in detail.
I skipped a few things which I'll include in a future video.
Beck is back! And with a sweeeet test-rig! Yeah, those soft-cases are gash and I've no idea why Kewtech, Metrel, Megger et. al. think sparkies want to put one of their most expensive purchases into such when Fluke show the way with rigid boxes. That Magnusson beast looks solid though. Good to see you spaffing out new content again!
For the price of this tough case it's a no brainer to protect such valuable equipment. Yeah I'll get the rig finished off when I get more time.
Welcome back and I see you have a new wall of sockets behind you 👍👍👍
You can never have enough sockets 🤣. Hopefully some more testing content to come?
Wohoo.....the boss man is back. Good to see you back - nice haircut and you look noticeably healthier and younger if that was possible. Nice tester well designed and intuitive. Nice add-one as well.
Nearly identical gear to me lol. Love my KT65DL. I have the light kit, the PAT test converter, the Proving unit, Leads, Crocodile jump leads, but i carry mine in its original canvas bag, along with my fluke clamp meter, and breakout boxes. Also.. That silver touch pad on the panel measures the potential between the operator and the
tester’s PE terminal. A message“PE HiV”is displayed on the LCD with the audible buzzer if a potential difference of 100V or more is present between the operator and the PE terminal at touching the Touch pad. Great to see you back James ;-)
Hey James, it’s great to see you back on 👍. Lovely video and thank you so much for the shoutout. Love my kewtech brilliant bit of kit.
No probs Craig 👌.
hi james,i really enjoyed this video,lovely to see you back,i love my test gear,superb sir well done
Not much Kewtech on TH-cam and yours has got some good CONTENTS👍
Good to see you back 👊
Glad to see you back 👍 thanks for a good video cheers
Welcome back.. Nice to see you again.🥳🇩🇰
Tak!
@@JBE Tak selv.😀🇩🇰
nice to see your back
Glad you are back bud!
Glad to see you back bud
Long overdue! Welcome back.
Welcome back J, you were missed... Yes Kewtech MFT No.1...
Definitely 👍
Great to see you back mate, great vid
Great vid....good to see you back 👍
Great to see you back 👍👍
Glad your back mate....
Just bought mine first kt65dl today well worth it
Great video and a great bit of kit
Kewtech used to be ROBIN electronics, I use the ROBIN KTS 1620 MFT
And he's back
👏👏👏 Yay... the man is back.
The Master's back !
I may be commenting on a lot of your old video's and that Savery Blokes video's but,I'm just trying to share the knowledge I've picked up after being in the game for nearly 40 years now. Hope you don't mind. I'm not the video making kind of fella but if I see you at the Elex Bolton Arena,I'll stop and have a chat
Hey Dennis thanks for watching and commenting 👍. I'm not sure what Elex show is on next due to the C word, but I'll try and make it to my nearest one.
Welcome back
Yayyy hes back !!!!!
Nice vid mate
I'm a local boy and was surprised to see your video of a rewire you did on Ashley Lane a while back, this was the area I was brought up in . I went to the college behind that job and also to the Primary school at the end of the lane
just to mention though when you start making additions to the rig you will need to put the tails from the supply into the top of the isolator and the board tails into the bottom, I know it looks really neat but the supply tails always go in the top as they can be pulled out if something heavy falls on them, sorry if you think I'm nit picking but for such a good job you would want it correct, wouldn't you?
Cheers and keep up the fantastic content
Hi there, yeah I know the area well and I've seen it change alot over the last 20 years. Thanks for spotting the isolator and the cable route. It makes sense for the reason. Hey we learn something new every day 😀👌.
😂 I'm exactly the same trying to work out what is best to say at the start of a clip. Except takes me about an hour !
Took me 4 months 🤣.
thank you for sharing
Nice idea with the with the better box I find my kt65dl spot on but sometimes the insulation resistance test takes ages to read 🤦♂️
Boom!! You are back!! :D
yaaaayyyy! hes baacccckkk! 😊😁😷
Great your back good little vid i like your plain speaking on the job good rig you got set up
Welcome Back :)
Standing on it!. Is that an approved method of access James? 😉😂
If you need another couple of inches it does the job 😉
J Beck Shed training. Sweet. Good to see you back online dude. Two things. That Jack needs less coke and my only gripe with my Megger MFT is the tie straps. The buggers are always coming undone, I like the clip on straps with the Kewtech. Cool test rig as well, Mr perfectionist. Tails on a plug top are they? haha
Haha any more Jack and I wouldn't be able to upload the content 🤣. The tails are very temporary until I can get a more permanent hook up to the shed.
@@JBE hehe, it is a cool setup dude. Of course, I was joking about the plug top. :) Take care.
Yay! 👍👍👍👍👍👍👍👍👍👍👍👍
How do you do a psc with this tester? Which ports do you need to put your leads in?
We've missed you
There he is 👌🏼 finally 🙄
Great video James. I’m looking to get a new MFT soon, and this has been very helpful. Have you always used Kewtech, or did you jump from another brand?
I've used several different MFTs over the years, including some of the analogue fluke types back in 2003!
Link for the case; www.screwfix.com/p/magnusson-professional-tool-organiser-22/9175p
Great video. Where did you get your null box from!? Super informative video though! 👍👏
If I remember correctly I picked it up from B&Q, opened it up and linked out the Line and Earth terminals. Cheers for watching 👍🏻
You saying you don't throw those plugs away. I do the same. Bizzare. I don't do anything with them except occasionally insert them in the ends of test leads/clips. Strange 😂
At last where the hell have you been fella lol
Where have you been? Been missing you, have had to resort to watching Mr Bundy
Who's he?
Bundy10 .....that’s not a code just how many videos released a week!
@@neilwright4515 🤣
what’s the difference between the Kewtech KT65 and the KT65DL?
the DL means "Down Loadable" so it saves your readings on the meter and you can save the data as a job lot from memory to your PC. It uses a supplied opto cable to connect to your PC.
24:36 Is there any reason why you wouldn't wire that to short out all three connections?
Can you make video of whole live test with kewtech 65dl ?
excellent mate. you want a job lol Alan Kewtech technical support
Cheers, glad you liked it. Love Kewtech been using them for years.
@@JBE hi mate. email me your address please alantowler@kewtechcorp.com
I’m not a fan of the kewtech strictly because I don’t like the look of it. Pathetic I know.
I do however like kewtech products in general, they make all the best test accessories!
also, your null box, you could just link out all 3 terminals and it can then null whatever combo you want 👌🏼
Yeah Kewtech accessories help you out alot. Nice to see some more content coming out of Manchester lad 👍. Keep them coming.
@@JBE not as good as you yet Mr B 👌🏼 but just as pretty 😂
Were you based?
Its good but its not megger 🤣
I use a Megger at work, there's no way you'll convince me Megger are better.