What about the 2006 model 300C? It has those stupid HID lamps as the main light. I can't find replacement light assembly, will it socket in just the same?
I'm not sure what the guys name in the video is but I would like to send him and his organization a special THANK YOU for always posting professional and accurate repair videos (especially on 2006 300c w/ 5.7 hemi). Keep up the good work and just would like to tell everyone to check out all his videos...they are all very beneficial and useful...again, thank you!!!!
I thought this was going to be a 20 min job until I watched this video 😢. Thanks for letting me know what I'm getting myself into. Going back into the house now. I'll be back when I have 2 hours to kill.
It doesn't make any sense to have to go through all of this to change a headlight assembly. Two hours for a 30 minute job. These are extremely nice cars but old school rule!
Hey man so I had to go get a front bumper for my 2005 Chrysler I ended up picking 2006 Chrysler C front bumper and now my headlights don’t match The bumper at all if I were to order 2006 Chrysler 300 C headlight will it work
I have an 06 300C with the factory projector headlights. The bulb gives off a very dull color. I was looking to replace them with LED or HID. However I went to remove the bulb to find theres some sort of ring held by 3 screws around the bulb housing. I checked a bunch of TH-cam videos and I haven't seen anyone with this issue. The screws are badly corroded. I tried turning the bulb housing to remove but it seems like the ring is applying pressure to the housing. I tried removing the rubber boot around it to get a better look and there's no way around it. Have anyone come across this issue? I was thinking of just snapping the bolts off or breaking the ring but I don't want to mess up the housing. Any suggestions are greatly appreciated!
What is the connector at the top of the rear of the headlight for? Ive seen it on my own car but dont know what it is for. There are connections for indicator light, low beam and high beam but there is a fourth connection!? Im perplexed!
Dude you can do it from inside the hood you don't have to take off the front bumper and front the driver side you only need to remove the air filter box
These are only listed to replace the 300c with projection style headlights. We have a set for non-projection style with halogen bulbs: 1ALHP00485. +king droski
+This We'll Defend The different models will have different style headlights, but the replacement process will be very similar. you can use this video as a guide and there may be some minor differences along the way. Thanks! 1AAuto.com
+JustClass We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
"We'll now be removing the front bumper, but it isn't the stock bumper and half the spots you're looking at are wrong. But this is what you'll see, if it was there."
+Eric Garcia Yes, these also fit that vehicle. Here is a link to the headlight kit shown in this video on our website. www.1aauto.com/2005-10-chrysler-300-headlight-pair/i/1alhp00612?TH-cam&CTA+Comment&OduYM
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
What about the 2006 model 300C? It has those stupid HID lamps as the main light. I can't find replacement light assembly, will it socket in just the same?
I wish you guys did all these videos on a 300c. They are way more common and C owners care for their car. Great video !
I agree I can't find nothing on 300c hemi 5.7
That was a C. The base madeley doesnt have foglamps. I know I own a base and a C
@@RG3EXFM1IBANEZ this car is not a 300C that's a V6 sitting in there...
I'm not sure what the guys name in the video is but I would like to send him and his organization a special THANK YOU for always posting professional and accurate repair videos (especially on 2006 300c w/ 5.7 hemi). Keep up the good work and just would like to tell everyone to check out all his videos...they are all very beneficial and useful...again, thank you!!!!
+Ray A. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I thought this was going to be a 20 min job until I watched this video 😢. Thanks for letting me know what I'm getting myself into. Going back into the house now. I'll be back when I have 2 hours to kill.
Great video, now show me how to do it all on the ground.
It doesn't make any sense to have to go through all of this to change a headlight assembly. Two hours for a 30 minute job. These are extremely nice cars but old school rule!
+James Fair Thank you for your feedback!
right
Thats engineers for ya right?
Do you have a resource for a 2002 or 2003 chrysler 300 touring headlight assembly replacement?
Hey man so I had to go get a front bumper for my 2005 Chrysler I ended up picking 2006 Chrysler C front bumper and now my headlights don’t match The bumper at all if I were to order 2006 Chrysler 300 C headlight will it work
I have an 06 300C with the factory projector headlights. The bulb gives off a very dull color. I was looking to replace them with LED or HID. However I went to remove the bulb to find theres some sort of ring held by 3 screws around the bulb housing. I checked a bunch of TH-cam videos and I haven't seen anyone with this issue. The screws are badly corroded. I tried turning the bulb housing to remove but it seems like the ring is applying pressure to the housing. I tried removing the rubber boot around it to get a better look and there's no way around it. Have anyone come across this issue? I was thinking of just snapping the bolts off or breaking the ring but I don't want to mess up the housing. Any suggestions are greatly appreciated!
I have a 2005 Chrysler 300m and I was wondering can I put the 300c headlights on mines and I will change my bumper and everything
+High Life 420 The headlights for the 300C will not fit on your vehicle. Please take a look at part 1ALHP00485.
hey were you able to switch the bumper and headlights on your model??
so it is possible to put on a chrysler 300c bumper and headlights on a chrysler 300m model?
How about adding adjustment of headlights? I have a 2005 300 and no video I've seen so far covers the set up it has.
+Texoma Tinker Great question! Search our video library for more on this vehicle: 1aau.to/m/video-library-c
What is the connector at the top of the rear of the headlight for? Ive seen it on my own car but dont know what it is for. There are connections for indicator light, low beam and high beam but there is a fourth connection!? Im perplexed!
Dude you can do it from inside the hood you don't have to take off the front bumper and front the driver side you only need to remove the air filter box
I am so frustrated I have to drop the front clip to anything on my car. Anyone else?
Ya it’s stupid. Could’ve just had a clip like a Porsche.
I have an 08 300XL I would like to no if the replacement HL for 300C fit on the XL?
These are only listed to replace the 300c with projection style headlights.
We have a set for non-projection style with halogen bulbs: 1ALHP00485. +king droski
Will this fit a 2007 v6 300
What about the other models? LX? My 08 LX head lights look nothing like that.
+This We'll Defend The different models will have different style headlights, but the replacement process will be very similar. you can use this video as a guide and there may be some minor differences along the way. Thanks! 1AAuto.com
My 06 Chrysler 300c had at least 4 more hard to get to bolts and plastic clips you didn't even mention
+Robert Griego Thanks for the tip! We'll pass this info along to our production team.
Looks like I’m in the same shape! Hey folks don’t b a everyone on on 10mm bolt on the bumper cover!!!! Pissed at this video
How do you replace side light bulbs on the chrysler 300?
+JustClass We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
"We'll now be removing the front bumper, but it isn't the stock bumper and half the spots you're looking at are wrong. But this is what you'll see, if it was there."
will these fit a 2006 chrysler 300c?
+Eric Garcia Yes, these also fit that vehicle. Here is a link to the headlight kit shown in this video on our website. www.1aauto.com/2005-10-chrysler-300-headlight-pair/i/1alhp00612?TH-cam&CTA+Comment&OduYM
1A Auto Parts already placed an order with you guys. Thank you.
I wish it was easy like changing headlights for a ford taurus
+kdog773 Thank you for your feedback!
Heck nah, I was gonna do it myself 😂
The whole comparison part was so unnecessary and added minutes i cant get back
Молодец!