Push or Pull a Hustler Raptor in Freewheel
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- If you need to push or pull your Hustler Raptor, Raptor X, XL, zero turn mower, here's a quick tip on how to put it in freewheel mode so it can be moved. This is helpful if you get stuck, run out of gas, or just need to push it or pull it to another location.
Wrench set: amzn.to/3Si4Bw5
Tools I use in my shop:
Gearwrench 3/8" Ratchet Set: amzn.to/48m0jMJ
Craftsman Screwdriver Set: amzn.to/3SbBY6I
Gearwrench Plier Set: amzn.to/3RFXQWc
Klein SAE Nutdriver Set: amzn.to/3TPltOT
Klein Metric Nutdriver Set: amzn.to/3vqvHuS
Gearwrench SAE/Metric combination wrench set: amzn.to/3vryOCR
Kreg Pocket Hole Jig: amzn.to/3H9tdni
Rhino Ramps: amzn.to/3pDcRtD
3-Ton Floor Jack: amzn.to/3w0JQKx
MITER SAW: DeWalt DWS779S amzn.to/2K7Su5x
PLANER: Porter Cable PC-305TP No Longer Available
Recommended Planer: Delta 22-555 (similar) amzn.to/47mnPHQ
DUST COLLECTOR: JET DC-650 amzn.to/2I4tOZA
BISCUIT JOINER: Porter Cable 557 Plate Joiner amzn.to/2IrCiJj
ROUTERS: Bosch 1617EVSPK 2.25hp amzn.to/41EXqnz
Makita Compact 1-1/4hp Router RT0701C amzn.to/3zZ1Hnk
CORDLESS DRILL and DRIVER: PORTER-CABLE PCCK619L2 20V amzn.to/4aEb6Dq
WELDER: Hobart 500559 Handler 140 MIG Welder amzn.to/2WrCLAe
GRINDER: Delta Power Tools 23-197 8-Inch amzn.to/4azyIJr
DRILL PRESS: ShopFox W1668 Benchtop w/Spindle Sander amzn.to/3l4SxPV
NAIL REMOVER: amzn.to/2XxSmzq
MULTI-TOOL: amzn.to/2Xu3TQl
Photo/Video/Audio Equipment I use:
Neewer Ring Light: amzn.to/2ZCCM7R
Canon Rebel SL3 (250D) camera: amzn.to/41FOPko
Canon 55-200mm STM lens: amzn.to/3DG9Qlk
Diety D3 Microphone: amzn.to/3SofWuJ
The above are affiliate links, while they do not cost you any additional money, I do earn a small commission when you use them. thanks!
Thanks for watching!
Dennis Coffey
CoffeyCraftsmanCo.
Hustler Raptor Freewheel
Thanks alot this just saved my ass having to come along my raptor onto the trailer. Good stuff to know
Glad it helped! Thanks for watching!
Hello Dennis. Haven't seen you in a while. Glad you're still around. I still have my YTH22V46 and have not graduated to the Hustler Raptor. You seem to ALWAYS hand out good advice.
I still have the Husqvarna in the family, gave it to my son. :) Thank you so much, Skip! As always, I appreciate your support and thanks for checking up on me!
I noticed that one of mine was out, been cutting with it like that. Thanks for this video.
Glad this helped! Thanks for watching, Ken!
Thank you. Exactly what I needed with no bullshit.
Thank you for watching, Travis!
Wow Great tip!!! My dealer never showed me this trick... I appreciate you posting the video!!
Thank you for watching, Paul!
That's good to know cause I didn't know that-thanks
Thank you for watching!
thank you! this is how it was set up on my fastrak sdx as well
Thank you for watching!
Thank you !
Thanks for watching, Scott!
Thank you
Thank you for watching, Don!
Hello Dennis hope all is well with you and the family take care I will be in touch as usual thanks again 👍👍👍👍👍
As always, thank you so much Kenny! I appreciate your support.
Thank you, brother!
Thank you! I appreciate you watching!
Thank you sir!
Thanks for watching, Joshua!
Thanks!!
Thanks for watching, Bryan!
My man!
Thanks for watching, Logan!
I have a cub cadet that is really sloppy when I pull the rings. I could hear your snap in place. Seems hustler maid a better transmission.
So far, so good with this Hustler...time will tell! Thanks for watching, Michael!
pulled the bypass out and put levers in N stell wont move could there be a bad switch not working . Thinks Jerry
Hey Jerry, thanks for watching! If you pulled both bypasses out and both levers are all the way in, I'm not sure what could be preventing it rolling. Does it operate normally with the bypasses in their normal position?
Need to let people know to pull the steering arms in…. Before pulling or oushing……
He did
Thanks for watching, Tom! I mention that at 0:55 in the video.
@cesarrager Thank you and thanks for watching!!
Oops…my bad…you did mention that….great video…very helpful!
Hey man. Thanks for the video. I pull mine and ensure the break is off but it won’t release the transmission is there something I can’t tighten or do to get those pull tabs working.
Thank you for watching, Daniel! If you are pulling the tabs out on both sides and the parking brake is off, it should freewheel.
Any ideas on why my left side release won't travel far enough to disengage?.it only moves a little but not enough to be able to disengage The left hydro.
I'm sorry Pablo, I don't know enough about the guts of those transmissions to know why it won't disengage. Is it still under warranty? Thanks for watching!
What if after pulling the rings it still doesn't move
Make sure you don't have the parking brake set.....if the steering levers are pushed all the way out, that sets the parking brake. They need to be pulled in to position as if you were sitting in the seat, ready to steer. Thanks for watching!
The church has this lawnmower and I have a friend who came by with truck and trailer to load it ..but he pulled those 2 rings and nothing..I pulled from the rear and nothing..it's inside a conex trailer..I'll check tomorrow if parking brake is on..
I pull mine
Thanks for watching, Michael!
🤤 promosm
Thanks for watching, Abner!