That's a unique mechanical switch. 👍👍 And if you get heavy arcing. A ac cap across the switch helps keep arcing down. I use 113 volt DC pulses. Great stuff.
Hi. Thanks for your suggestion. Your idea that a cap across the switch works fine. Thank you. 👍👍 and I cant wait to use 100 plus volts on this set up because it really increases the speed of the motor..
You need to figure out how to use the bearing portion of this topology to make use of the homopolar action, it is a next step to be incorporated in this Bedini type Energiser.
@@DeryckThompsonChasingtheDream For instance, if the the switching comutator is the positive. You put and inverse polarity diode on the coil on same side, so it can block positive and let the flow of negative current wen it turns off. and can charge other battery, not the same, once polarity of sistem does not allow to charge same battery.
@@DeryckThompsonChasingtheDream Cheers, do that! Give feedback or make a video. For sure you will get it run better with less amp draw and no spark. no lenz law
@@DeryckThompsonChasingtheDreamSorry i did not say your name correctly on video. The new output should have battery of same voltage or less, for charging. th-cam.com/users/shortsco6aRlL_HvU
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
That's a unique mechanical switch. 👍👍
And if you get heavy arcing. A ac cap across the switch helps keep arcing down.
I use 113 volt DC pulses.
Great stuff.
Hi. Thanks for your suggestion. Your idea that a cap across the switch works fine. Thank you. 👍👍 and I cant wait to use 100 plus volts on this set up because it really increases the speed of the motor..
Oh ya
Very Nice, if you replace the aluminium frame with wood your efficiency will be much greater. I love the rotating contacts.
Красавчик займається улюбленою справою
Thank you
Good job !!!
Is it more efficient or better than a bedini? Quite interesting approach for that mechanical switch.
Use 50 volts for your input and watch the magic happen!
You need to figure out how to use the bearing portion of this topology to make use of the homopolar action, it is a next step to be incorporated in this Bedini type Energiser.
Use a diode and charge other battery in oposite polarity, the motor will run better and no spark
Hi Thanks for the advice. when you say use a diode? where abouts would you fit it. thanks
@@DeryckThompsonChasingtheDream For instance, if the the switching comutator is the positive. You put and inverse polarity diode on the coil on same side, so it can block positive and let the flow of negative current wen it turns off. and can charge other battery, not the same, once polarity of sistem does not allow to charge same battery.
@@RicardoJMGuimaraes Thank you for the info. I will try that and see what happens.
@@DeryckThompsonChasingtheDream Cheers, do that! Give feedback or make a video. For sure you will get it run better with less amp draw and no spark. no lenz law
@@DeryckThompsonChasingtheDreamSorry i did not say your name correctly on video. The new output should have battery of same voltage or less, for charging.
th-cam.com/users/shortsco6aRlL_HvU