How to INSTALL a TRAIN Horn in Your Car - Super Easy and CHEAP!

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024

ความคิดเห็น • 55

  • @taylorsvilleTJ
    @taylorsvilleTJ ปีที่แล้ว +60

    That is NOT a TRAIN AIR HORN.

    • @halewilson
      @halewilson ปีที่แล้ว

      😆

    • @Garagecouple
      @Garagecouple  ปีที่แล้ว +17

      Womp womp wompp

    • @ogdumplings8196
      @ogdumplings8196 11 หลายเดือนก่อน

      “ that is so cool, I’m so happy to have it”

    • @thedon9670
      @thedon9670 7 หลายเดือนก่อน +4

      Exactly. Typical click bait

    • @realLetsGoBrandon45
      @realLetsGoBrandon45 6 หลายเดือนก่อน +1

      @@Garagecouple California sucks because of the people.

  • @bill-nj6fc
    @bill-nj6fc 11 หลายเดือนก่อน +6

    name this video, HOW NOT TO INSTALL WHAT IS NOT A TRAIN HORN, lmao

    • @Garagecouple
      @Garagecouple  11 หลายเดือนก่อน +1

      Oh nice one bill

  • @DavidUlrich-t6i
    @DavidUlrich-t6i 9 หลายเดือนก่อน +4

    It would be nice to see the switch. I am struggling with adding this type of horn into the main horn.

  • @BerniesBastelBude
    @BerniesBastelBude ปีที่แล้ว +8

    I would like to install a Ghostbusters siren in my TJ - didn't find a not too expensive way for this project though

    • @Garagecouple
      @Garagecouple  ปีที่แล้ว +1

      Would have to be a speaker I think..

  • @KiD-R3Tr0
    @KiD-R3Tr0 3 หลายเดือนก่อน

    It’s new , it’s refreshing , it makes sense . 👌🏾👍🏾

  • @gofasters1
    @gofasters1 8 หลายเดือนก่อน +1

    I love it. Does the compressor stay there with that type of bolt holding it down when you go off road?

  • @tlover94
    @tlover94 ปีที่แล้ว +6

    That was an operator error. I have the exact same Ryobi drill and I've never had that happen.

    • @Garagecouple
      @Garagecouple  ปีที่แล้ว

      Just because it hasn't happened to you doesn't mean it's operator error. Lol

    • @tlover94
      @tlover94 ปีที่แล้ว +2

      @@Garagecouple You can tell he didn't tighten that Chuck down.

    • @tlover94
      @tlover94 ปีที่แล้ว +1

      Don't get me wrong, I like what you guys do. Just because you have a mishap doesn't mean it's the equipment. You can see that the check wasn't tight. I've had that happen to me on different drills. It's because I didn't have the chuck tightened down all the way.

  • @mydearriley
    @mydearriley 5 หลายเดือนก่อน +1

    What do the controls look like? Did this come with the button/relay?

    • @Garagecouple
      @Garagecouple  5 หลายเดือนก่อน

      Wired up to our switch pod!

  • @trickolas78
    @trickolas78 10 หลายเดือนก่อน +1

    Great job!

  • @JimmysJohn33
    @JimmysJohn33 4 หลายเดือนก่อน

    Drill holes got it 😂😂

  • @richsmith3120
    @richsmith3120 ปีที่แล้ว +1

    Hello from Spokane!

  • @jeeperguy4290
    @jeeperguy4290 ปีที่แล้ว

    LJ for the win! Unicorn 🦄 😜🤙🏻😎

  • @d1906k
    @d1906k 4 หลายเดือนก่อน

    Awwww a beep beep 🤣🤣🤣

  • @DareemCordon
    @DareemCordon ปีที่แล้ว +1

    I have a jeep Liberty sport 3.7 engine, an my issue with it is that, I go to try an start car with key, but i don’t hear the fuel pump activating, also I don’t get no crank from my starter, I have bypass the fuel pump direct with 12v an it activates same for starter, but before all that I replaced relays with new ones an still nothing, but now some reason the gauges for speed, RPM an fuel gauge doesn’t activate no reading, remind you when I put car key in key slot to ignition can see the activate because dash light comes on but no crank from starter, engine doesn’t turn over or try to start, an key doesn’t turn car engine over to run also doesn’t send power to starter at all. @garagecouple

    • @soundchamber2696
      @soundchamber2696 ปีที่แล้ว

      Sounds like someone installed a kill switch to the cars computer that controls the fuel pump.

  • @richsmith3120
    @richsmith3120 ปีที่แล้ว +1

    Its cute but im not so sure about blowing that horn at rude drivers in Southern Cal! #roadrage!

    • @Garagecouple
      @Garagecouple  ปีที่แล้ว

      Just loud enough to get their immediate attention. The factory horn is a bit soft

    • @Josef_R
      @Josef_R ปีที่แล้ว

      It's why you don't just bring a horn to a gunfight...unless you live in Kalifornia.

  • @nalsra0
    @nalsra0 7 หลายเดือนก่อน

    Quiet “train” horn 😂😂

  • @salcigar
    @salcigar 10 หลายเดือนก่อน

    Not a train horn, just a cheap air horn. Do it right with an onboard air system and tank. Train horn should have at least 3 bells. I enjoy your videos but you tried to slide this one passed us.

  • @cnstars13
    @cnstars13 8 หลายเดือนก่อน

    What gauge wire did you use

    • @beeseechurger
      @beeseechurger 7 หลายเดือนก่อน

      Looked like 22 or 20

  • @CarlosGutierrez-ih4ni
    @CarlosGutierrez-ih4ni ปีที่แล้ว

    That sounds pretty week 😂 just get the real train 🚂 horns bro 😎

    • @Garagecouple
      @Garagecouple  ปีที่แล้ว +2

      Hehe it's plenty loud for $20

  • @scorpian2722
    @scorpian2722 หลายเดือนก่อน

    Not a train horn

  • @youngmore3884
    @youngmore3884 ปีที่แล้ว

    The ryobi just has a bad chuck.

    • @Garagecouple
      @Garagecouple  8 หลายเดือนก่อน

      And has since been replaced with a milwauki

  • @LTUSATV
    @LTUSATV ปีที่แล้ว

    Beep beep.

  • @flojotube
    @flojotube ปีที่แล้ว

    Its DEFINITELY NOT "Ryobi"... its a drill chuck that ONLY THE USER can screw up..

    • @Garagecouple
      @Garagecouple  ปีที่แล้ว +1

      There is no drill chuck for this model. Lol.

  • @secessionnow4133
    @secessionnow4133 11 หลายเดือนก่อน

    If a girl can do it so can i

  • @impj216
    @impj216 11 หลายเดือนก่อน

    WTF... That's a sissy tub ... Go learn what a Train horn is... This isn't one!!!!

  • @recoswell
    @recoswell 8 หลายเดือนก่อน

    aftermarket parks are worth more than that junk of shit jeep