Very useful video for maintenance related persons. Sir I have a confusion, I have checked the backlash in a milling machine for z axis that is 50 micron, now what value I entered in parameter 1851 for compunsate the 50 micron backlash...plz explain sir
Very helpful
Very good
Thanks
Sir please make video on ATC alignment procedure also
👍
How to check backlash in axis bearing and ballscrew
Thanks one query solved about repeatibility i.e 3 to 5 micron, but if it is high what to do to control repeatibility
Need to replace endsupport bearing and also do preloading and check
Sir please make one video about how to troubleshoot with help of logic input, put
ok
Very useful video for maintenance related persons.
Sir I have a confusion, I have checked the backlash in a milling machine for z axis that is
50 micron, now what value I entered in parameter 1851 for compunsate the 50 micron backlash...plz explain sir
If back lash is 20 micron, what will be value of repeatibility.
Will it be higher than 20 or anything else?
backlash doesn't depend on repeatability
If we get backslash 20 micron, n put 1851 40 micron what will be effect.
If you do so then your backlash may increase.
How much backlash value is acceptable and can be controlled by parameter 1851
As such it is not menyioned in fanuc manual but as per out knowledge backlash till 80-100 micron can be recovered with parameters
@@technicalgyancentre2946 ok
Bhai backlash ka parameter 1851 hi