Today we are going to make a dehumidifier from some old pc mainboards, a tupperware and a cheap peltier from aliexpress. Link for peltier: s.click.aliexpress.com/e/cbTFbX1f Hope you like it.
Yes you are right, density will decrease when fluids speeding up. And can evaporation again. But your application is hasnt circulation area. I want to put in a 100L isolated box for made small dehumidifier. Do you have suggests for me? Shoul I move hot heatsink to out of box ?
my design is not perfectly sealed and there are small gaps all over it also diffusion is a powerful force that can do its job to balance the air humidity inside the box. a direct hole is not recomended. If you are going to use peltier as like me it wont change anything when you remove the heatsink out of box because the peltier will heat whatever you do. İf you can use a compressed gas cooler(refrigerator system) it will be far better than in this project. last one question, why do you write in English?
most likely your adapter is not 2 amps and blinking because its power rating can not reach the recommendations or it has some weird safety. try a different one
![คณะขวัญใจ - นางสาวขวัญใจ [Official Music Video]](http://i.ytimg.com/vi/a8zn5pGlRUY/mqdefault.jpg)
Yes you are right, density will decrease when fluids speeding up. And can evaporation again. But your application is hasnt circulation area. I want to put in a 100L isolated box for made small dehumidifier. Do you have suggests for me? Shoul I move hot heatsink to out of box ?
my design is not perfectly sealed and there are small gaps all over it also diffusion is a powerful force that can do its job to balance the air humidity inside the box. a direct hole is not recomended. If you are going to use peltier as like me it wont change anything when you remove the heatsink out of box because the peltier will heat whatever you do. İf you can use a compressed gas cooler(refrigerator system) it will be far better than in this project. last one question, why do you write in English?
Hi, interesting DIY. Did you measure humidity changes?
No, I didn't measure the humidity. The area where I collected moisture was not a very humid place.
interesting man! Thank you
When I use 12v 2amp adapter, adapter was blinking .....can you suggest an adapter which should not blink
most likely your adapter is not 2 amps and blinking because its power rating can not reach the recommendations or it has some weird safety. try a different one
@@bakidilek thank you
What kind of thermal paste did you use?
Nothing that special. Just cheapest one.
Super 👍
Can I use peltier TECI 12703
Yes.
Why do I want to remove the moisture that is inside the box?
This does not remove the ambient humidity
Bro it removes the humidity in the room and collect it in the box.
How many amperes do you recommend then?
depends on the peltier that you will use. You can use 5A 12V.
@@bakidilek ok, the one i got is 12v 92W maximum
@@benjaminlalrinzuala9543 5A 12V means 60 watt, try not to exceed 75 watts.
@@bakidilek thank you so much
@@benjaminlalrinzuala9543 you are welcome
How do you get the subscribers
If they like what they watched then they subscribe your channel. That is it.