NEW ENGINE and it still has issues Honda S2000
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- In this video we finish replacing the engine in this 2003 Honda S2000 AP1. Before putting the new engine in, we replaced the timing chain, oil pump chain, sprocket, tensioners, timing cover gasket, oil pan gasket, pulleys, belt, harness, and much more. We also decided to install an ACT ProLite flywheel and a LuK clutch kit along with new bearings. With everything put back together this s2000 is back on the road again. Be sure to subscribe to see more content like this on various cars! Thanks for watching!
Support my channel by becoming a member using this link: / @shoplifetv
My Amazon Store: www.amazon.com...
Buy My Merchandise: www.shoplifetv.com
Ask me a question: www.shoplifetv.com
Request a Shop Appointment: www.shoplifetv.com
Instagram: @ShopLifeTV
/ shoplifetv
My vlog channel: / shoplifevlogs
TH-cam Business Inquires: Email me amotorwerks@gmail.com
Disclaimer: Some links will contain affiliate links. Due to factors beyond the control of ShopLifeTV, I cannot guarantee against improper use or unauthorized modifications of this information. ShopLifeTV assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ShopLifeTV recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ShopLifeTV, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ShopLifeTV.
Been there! My AP1 took almost a year to be “fixed” even after the new engine was put in.
Restoring S2000’s takes time!
I subscribed!
Nice work guys! Glad to see this project came together. The owner must be thrilled to be back on the road with the glorious 9K redline!
but it was hit on the side tho
Thanks Rich! He was ecstatic!
unfortunately the original engine spun a bearing shortly after he was backed into at a drive thru. Now that the car is running again, he will be getting the cosmetics dialed in!
The other shop say they replaced the clutch... looks like they didn't. The one and only reason I work on my own cars. Hard to find good shops anymore like yours.
Almost positive they didn't, they also charged him for a clutch master and slave cylinder along with various other items that looked original.
That's sucks hardcore. I don't condone violence but when it happens to dishonest shops, I understand.
Being an S2K owner 2007 AP2, I enjoyed watching this video.
Starting to bring back some new life in that s2k!
Definitely. Can't wait to see it back on the road and have the body damage fixed. Thanks for watching Julian!
The value of these engines trying to find a low mileage one its almost worth just dropping the money and getting a spoon at this point. (At least for us up here in Canada) Great video!
Selena has gotten great at filming!!! The editing is top notch also!
Should have put a straight six BMW engine in it. N55
This isn't a sixth gen Toyota Supra. That BMW engine is NOT going to talk to those Honda electronics and vice versa. How about the gauge cluster? Not a simple swap either. Then there is fabricating the front engine cradle and mounts, cooling system, electrical system. If you're so hot on this swap, why don't you post the video and show the rest of us how it's done?
Secondly, it's not his car to do this swap on, and the owner of the car did not request or approve this swap. No idea how you planned on paying for this unauthorized swap. What is this, Pimp My ride Felony Edition?
Thats a great idea, would have been cool to do a newer K Swap from the type r.
@@houseofno chill out bro you’re gunna blow a gasket getting that riled up
Disappointed that you didn't get any overnight parts from Japan
you the man!!!! love your attention to detail and work!
Thank You Justin!
I really enjoyed watching it i never finished any video over 10 min but thus was amazing keep it up..God bless
Thanks for watching Salah. We didn't want to split it into too many parts since we are excited to post about our new Build series!
SHOWS OFF THE GAINZZZ... enjoy your videos bro. keep up the good work!
Hahaha thanks Pauly!
Great job. Soon as u said random misfires I said to myself: ignition
Gonna be back in the Bimmer gang, picking up an f30 or f32 today 🖤 much love from Evan back in SoCal
Bleed the clutch and radiator for air
Good job bring back the s2000. :)
I've honestly always had bad luck with Hondas, my brother in law sewers the're the best, but he still gets a new motor every 6 months, My BMW is still ticking like a clock 😆
Sometimes cars have a mind of their own lol
Should had torqued the pressure plate to the flywheel.
Wow. At the first start attempt, I got a 180 heartbeat :0 . And for the misfire, I had the coils in mind, like we are used to, driving BMW's, hahahaha. Good job brother and sister, Dutch regards, Nico.
Hahaha thanks Nico. BMW owners know the coil issues all to well lol
She sounds good man, great video.
You got mad skills bro.
How do these engines compare to Bimmers in terms of difficulty to work on?
Thanks man! And very similar, the F20 is actually very easy to work on with no special tools required for engine timing. Parts availability is a lot less though compared to most BMW engines.
I bought my 03 s2k brand new in 03. I've since replaced the clutch MC, TC tensioner, adjusted valves and radiator using a 10mm wrench or socket. This is an easy car to work on and its dependable.
Usually, slow cars are pretty reliable....S2000 is no different
Glad the motor worked out for you guys.
Thanks Jason, glad we were able to source it from you. Hope all is well!
Bruh you came to illinois you should have atleast told me - could have say hi 😂
Lol you should follow me on Instagram, we posted about being in Chicago and trying out some deep dish pizza as well! Next time!
Great video, I learned so much. Thanks!
Thanks Jon!
You should always prime it before starting it
Because it’s the f20c you’ll want to consider the ap2 valve retainer upgrade. Great video nonetheless!
Amazing episode !!! Love this series (;
Thanks man! I appreciate the support!!
Damn.. A year later and y'all still playin with this honda lol..
I think your on your way to becoming a master mechanic!!! Then when that happens you gotta move up to Commercial cargo trucks. ;)
Nice vid😏
goonzquad had the same issue with there engine turns out there are 2 versions of that engine and they are not electronically the same good luck
Is it the 2006-2009 that’s different?
@@moustachio334 the vvt housings are different don't know the year date
@@glennarnold3970 F series doesn’t use VVT
Awesome vid of the s2
I'm not even going to watch the video, just keep telling yourselves: this is the most reliable sports car ever made it's a Honda. I'm a Car Guy so I love them all, but I'm not Jay Leno so I got to be choosy and the S2000 with that narrow power band doesn't make the cut. And yes I know you all love that high reving engine so for that category I chose an RX8! You all love the handling so for that category I got me a boxer, doesn't beat the S2000 by much on a track but it beats it every time. And you all love that front engine rear drive Roadster feel and for that I picked a Z3 and an NA Miata!
Can't wait to hear people complain that you don't work on non-BMW's.
Lol seriously though. Thanks for watching Brian!
I was looking at one of these for 12k about 10 years ago it was in nice shape that's a 30k$ car now I shoulda bought it I guess, now all I can afford is an accord lol, still has the 6 speed and 2.4l for half the price but not as cool
Dude look at those gains ! 😁
Hahaha thanks man!!!
Make sure the wheels are turning... "The back" :)
The s2000 engine has some special cylinder sleeves ,when they resurface the engine ,the sleeves lost this "substance" or "treatment" (apologize for my bad words) and i dont undertand how people fix the engine?
They replace the sleeves for another brand new?
A complete new block?
For all the Bimmer boys who saw the title and are bashing the car because of the title, it was just the old coil packs. Also I’m glad I didn’t sit through this entire clickbait video to find this out. And yea letting any car sit for a year will deteriorate the clutch and brake systems so it needs a new clutch cylinder and I’m sure the brakes will be the next issue he has and I’m sure he’ll post another clickbait title for those problems too.
Damn I wish you was my mechanic
Hey bro by any chance you can rebuild a em1 motor?
Good one mate
looks like possible external head gasket leak
I just subscribed to you channel. I'm about to buy new wheels and shocks for my 03 s2k and thinking about going with 17's all around. Will 17 cause my speedo calibrations to not be correct? Also what's a good shock to buy?
You’re a wizard bro amazing vid🙌🏼💯
How does someone get in contact with you by the way?
I think he said he is not taking any new costumers for a while because he is dedicating all the energy and time to the channel.
@@osanshouo1684 respect, thanks brotha
Thanks Mark! Like ^ Osan said we are trying to focus more on our own projects. We did take in a few jobs for friends/family, but we are working on our own projects currently. Next video will give more insight on what's going on. Thanks for watching!
Jason were you able to find out what was causing the misfire I'm having the same issue with a 03 Hyundai accent .
Keep it up
I would have rebuilt my engine with all new parts rather than buying a mystery engine.
🤙🏻
I still don't understand why he still swats to do things. Even with a lift. So confused ?
You have on AliExpress
Who needs a funnel!!!
Where is selena, havent seen her in a while
My 69,xxx mile s2k just shit the bed... hex bolt popped out and the third cam fucked
coool m8
you need a scanner.
Can you give me any advise Im wanting a BMW M3 But really a M5 any advise one which one but i did just find a M5 that the diesel went out at like 115k. And he had a factory new 3 series with no turbos in it think it will last
For your own safety, you need boots with steel caps, right ?
Holly ads!,
You rebuilt the motor and reused the spark plugs and ran old gas? Run the car, pull a coil at a time and which one doesn’t change the idle. O I just saw the end of the video. Coils don’t last 20 years
If you had to go to such lengths to get a replacement motor, why not rebuild the original? Unless it had a lot of damage, but new bearings shouldn't have been too bad
The F20 engine doesn't really have a good success rate with rebuilds. The original engine with spun bearings also had scratched bores as well as damage to the crank. Financially it made more sense to do an engine replacement.
Have you yourself ever replaced a spun rod bearing on these cars? Maybe you should be the one to post that video yourself, Mr. Spielberg.
@@ShopLifeTV That makes sense, that would require new pistons, crank, and boring the cylinders on top of the bearings
@@houseofno His response was far more constructive... said it has a damaged crank and bores.
All the skill, tools required, & complexity of these ICE cars is why EVs are the future. I do bolt ons myself but engine work is just too time consuming & costly.
Says random TH-cam with probably no idea about how ev’s work
Hydro carbon fuels have a far higher energy density. I think 50k kj per kg. Batteries are only about 400.
Most electric vehicles have only 200 to 250 miles of range. ICE vehicles are still at least fifty percent ahead of that.
S2000 is overpriced mini civic
Be mad my overpriced civic can sell for 30k after 20 years