Thanks for the Fractal content. I have used Fractal for over 10 years. Just ordered the FM3 and FC6 yesterday, looking forward to upgrading from the AX8.
Sounded great man! Love the FM3 videos. I have owned and used them all but I am absolutely loving the capability of the OMG9 setup. Hoping to see a few more videos in the future. Thanks for everything you are doing!! Love this!
Great video! I'm getting ready to implement the FC-6 with my FM3, so this was the perfect video to see real world application!! I appreciate your commentary on your use and experience with it. Love me some Fractal! God Bless you my Brother! : )
Appreciate the video. I currently use two HeadRush units (Pedalboard, Gigboard) on my worship team. Generally, I rehearse with the Gigboard on my office table and then use the Pedalboard for all the live work. No complaints with the HR gear at all, good sounding. I've been on the fence between upgrading to either Helix or an FM3 set up. Love the use of the FC6. Seems like I'd be able to use the FM3 on my desk and just grab and go...
Im debating swapping my board for the fm3 . On another note I just hate the 3 song rule in churches these days geeze sooo upsetting... i miss thebgood old days where playing 6+ songs was the usual.
Thanks! I think I'd still like the ability to get to the individual effects, so I'm not sure if I'll change that out or not. Getting used to the extra switching isn't too much, honestly. But the beauty of it is how customizable it is.
I’m hesitating to buy one. A lot of people say that cpu is quickly overloaded even with a basic preset. Not enough horse power which can be quickly frustrating. Neural quad cortex seems to be the best compromise if you don’t have 2500 bucks for AxeFX3.
I know this was half a year ago, but if you're using a ton of effects in each preset then you'll hit it, but if you're conservative with your space you'll be fine for the most part. There are some space saving tactics that you can use, but if you are walking in with the assumption that you're going to load it up, yea, get the quad cortex. It's just as easy to use and you get a lot more CPU. The only problem right now is you're limited on amp/cab models. You definitely have enough, but not nearly as much as the fractal units right now. I haven't used a Helix unit, but that should also be in your consideration. I normally use a drive (or chorus), amp, gate, cab, delay and reverb, so I don't have a lot of issues, but when I try to make one preset for a full set and I need stuff that will be turned off for different types of songs, I run into problems where I need to be conservative. I don't know how many effects you add in there, but if you are getting this thing with the intention to push it to the limit, get something with a higher limit. If you're looking for a professional quality effects processor at a budget price, this is your guy. You can do almost anything on this. Also, if you already have pedals, there is a send/return you can use and if you put a reverb pedal there, you'll be saving a ton of space.
So if you had to chose.. would it be the line 6 or the setup you used in this video..and let me say I love your videos and content. Thank you for being you
Sounds great mate a specially when the FM3 is by it self in a mix you can actually hear it ...but having said that it is so polished it kinda gets lost in a mix when everything is going full on .....well most modelers have that "issue" i guess you can eq it better for live unless this is mixed down to be low in a mix for a reason ....either way convenient tool for sure ....cheers.
Hi Buddy amazing videos thank you ok. I can connect the aviom in-ear system to the Kemper Stage {mini jack to aviom headphone jack to kemper return L-R }to listen to the seq or tracks "for church or live perf" so i can listen exactly my guitar setup the way i set it up at home and it sounds the same because i plug my in-ears to the Kemper instead of the Aviom System, can we do the same thing with the FM3? please say yesssss and show us 🤞Thank you in advance
11 switches on the AX8 was attacked by the bean counters. I need more switches instead of tap dancing. Silly. And for traveling you lug around more gear wires, and pedals. I would prefer an AX12
Sounds fantastic - seems like quite a bit of tap dancing. This has kept me from upgrading to be honest. May be alright for others, but for me in the heat of battle I like to not have to think to much about footswitches. That's one thing I really liked about the AX8......Just my opinion, but if it works for you, that's great!
Well my church does not pay musicians (I’m a volunteer) or buy any gear for musicians. Some churches do pay, and there for sure are people who play just for the ‘gig’, but it’s the exception rather than the norm.
The FC controllers will be superior to a midi controller for a number of reasons. You don’t have to power them externally. You can program them directly inside of the edit software. Every button can do 3 different actions based on how you set it up. This is just to name a few. However you can’t use FC controllers with other hardware, and the FM3 is fully compatible with midi controllers.
I’ve owned both and both are really great. To me personally I enjoy the FM3 and FC6 combo more than the helix. I feel like it’s easier to get a better tone but also a bit less user friendly initially. However I have really grown to love the UI and how customizable everything is overall.
I think you could add a 2 button switch for preset up and down and leave the existing setup as is otherwise. See this video: th-cam.com/video/1PtaWLeldvQ/w-d-xo.html
Sound quality: excellent On-the-fly user experience: lacking Price point: difficult Overall value: ehhh *Update: was recalling the Axe-FX III price, which is significantly higher than this unit
I've almost sold my entire board several times but just can't do it. Was using the Stomp and now I'm using the Iridium with my board. Just can't get away from it because of the ability to adjust on the fly
@@cour1988 Ha! **Cue Homer Simpson bush gif** However, you definitely can't argue with instant flexibility and ease with something like an Iridium, though!
Eh, I’m not sure if I agree. Compared to a Helix Floor, editing on the fly on FM3 isn’t quite as intuitive, but once you learn the unit it’s really easy to do anything you’d want to. Price point wise, the FM3, FC6, and the expression pedal will cost exactly the same as a Helix, so ‘competitive’ is the word I would use. Many people think the FM3 is a Stomp competitor, but it is far more capable than the HX Stomp (and likewise more $$$).
Please remember, while beautiful music that is focused on Christ is appropriate for a church service, that should not be the focus for the true believers. The message of Christ Our righteousness, living a holy life, and preparing to be translated should be the main theme, not emotionalism or showmanship.
Thanks for the Fractal content. I have used Fractal for over 10 years. Just ordered the FM3 and FC6 yesterday, looking forward to upgrading from the AX8.
I think you'll be very happy coming from the AX8 (which is also an awesome sounding piece of gear).
Sounded great man! Love the FM3 videos. I have owned and used them all but I am absolutely loving the capability of the OMG9 setup. Hoping to see a few more videos in the future. Thanks for everything you are doing!! Love this!
Great video! I'm getting ready to implement the FC-6 with my FM3, so this was the perfect video to see real world application!! I appreciate your commentary on your use and experience with it. Love me some Fractal! God Bless you my Brother! : )
Appreciate the video. I currently use two HeadRush units (Pedalboard, Gigboard) on my worship team. Generally, I rehearse with the Gigboard on my office table and then use the Pedalboard for all the live work. No complaints with the HR gear at all, good sounding. I've been on the fence between upgrading to either Helix or an FM3 set up. Love the use of the FC6. Seems like I'd be able to use the FM3 on my desk and just grab and go...
That live sound...!! 10/10 imo!
That is so comprehensive, you covered all the things that I wondered about.
That seems awesome! I'm on the waiting list for the FM9!
Im debating swapping my board for the fm3 .
On another note I just hate the 3 song rule in churches these days geeze sooo upsetting... i miss thebgood old days where playing 6+ songs was the usual.
Thank you for this video. I just got this set up yesterday and trying to get myself acquainted with it.
Love this setup. Moved from the helix and I'm more than happy
It sounds so good!
What’s the reason behind that change? Seems more complex.
It sounds way better and is extremely easy to get amazing sounds! In a league of its own right now as far as modelers and profilers go
Sounds great man!!! Change the FM3 switching to up/down banks and you've got a winner on your hands!!! 👦🏻
Thanks! I think I'd still like the ability to get to the individual effects, so I'm not sure if I'll change that out or not. Getting used to the extra switching isn't too much, honestly. But the beauty of it is how customizable it is.
Don't forget Tap/Hold, you can come up with some really clever switching options there
How can I watch this live day ? What is the channel of the church ? If possible send the link 💪🏼
Sounds great Brian. See you on the next one 👏❤️
I’m hesitating to buy one. A lot of people say that cpu is quickly overloaded even with a basic preset. Not enough horse power which can be quickly frustrating. Neural quad cortex seems to be the best compromise if you don’t have 2500 bucks for AxeFX3.
I know this was half a year ago, but if you're using a ton of effects in each preset then you'll hit it, but if you're conservative with your space you'll be fine for the most part. There are some space saving tactics that you can use, but if you are walking in with the assumption that you're going to load it up, yea, get the quad cortex. It's just as easy to use and you get a lot more CPU. The only problem right now is you're limited on amp/cab models. You definitely have enough, but not nearly as much as the fractal units right now. I haven't used a Helix unit, but that should also be in your consideration.
I normally use a drive (or chorus), amp, gate, cab, delay and reverb, so I don't have a lot of issues, but when I try to make one preset for a full set and I need stuff that will be turned off for different types of songs, I run into problems where I need to be conservative. I don't know how many effects you add in there, but if you are getting this thing with the intention to push it to the limit, get something with a higher limit. If you're looking for a professional quality effects processor at a budget price, this is your guy. You can do almost anything on this. Also, if you already have pedals, there is a send/return you can use and if you put a reverb pedal there, you'll be saving a ton of space.
Very informative. Thank you.
I plan to use an FM3 with the eventide H9 for a bonus effect like pitch.
So if you had to chose.. would it be the line 6 or the setup you used in this video..and let me say I love your videos and content. Thank you for being you
Sounds great!
Could an external tap be hooked up in this setup? I'm always having to tap in tempo.
Is there or can you make a video on how to set this up??
Sounds great mate a specially when the FM3 is by it self in a mix you can actually hear it ...but having said that it is so polished it kinda gets lost in a mix when everything is going full on .....well most modelers have that "issue" i guess you can eq it better for live unless this is mixed down to be low in a mix for a reason ....either way convenient tool for sure ....cheers.
Is your church open? What state are you in?
Hi Buddy amazing videos thank you ok. I can connect the aviom in-ear system to the Kemper Stage {mini jack to aviom headphone jack to kemper return L-R }to listen to the seq or tracks "for church or live perf" so i can listen exactly my guitar setup the way i set it up at home and it sounds the same because i plug my in-ears to the Kemper instead of the Aviom System, can we do the same thing with the FM3? please say yesssss and show us 🤞Thank you in advance
How did you assign the footswitch color on scenes mode by per preset?
I tried to change the color but it always change the color by global.
I think I would add a separate ( single ) footswitch for Tap Tempo.. Which I need :)
Who's that skinny dude rocking out that FM3/FC6??? :)
Wes
Dear Brian,
Amazing video! Could you please suggest where can I watch the full version of the concert, some elements of which are shown from 5:50?
8:03 Reminds me of those spilt "ergonomic" keyboards lol
11 switches on the AX8 was attacked by the bean counters. I need more switches instead of tap dancing. Silly.
And for traveling you lug around more gear wires, and pedals. I would prefer an AX12
Sounds fantastic - seems like quite a bit of tap dancing. This has kept me from upgrading to be honest. May be alright for others, but for me in the heat of battle I like to not have to think to much about footswitches. That's one thing I really liked about the AX8......Just my opinion, but if it works for you, that's great!
Will mfc footcontroller work with Fm3?
Fractal FM3 or Kemper Stage?
6:25 artist n song name?
7:10?
1 já é um absurdo , imagina 2 😵
I would use this axe fx fm3 with the hx effects
Holy smokes. Command Center in HX Stomp doing the same thing for HX Effects. I need to play with it.
My thoughts exactly. I'd like to do it with the helix just to implement the new poly effects.
Sometimes I wonder if musicians join these churches just for the gigs.
Well my church does not pay musicians (I’m a volunteer) or buy any gear for musicians.
Some churches do pay, and there for sure are people who play just for the ‘gig’, but it’s the exception rather than the norm.
How do you think using a Morningstar midi controller with the FM3 would compare to using the FC6?
The FC controllers will be superior to a midi controller for a number of reasons. You don’t have to power them externally. You can program them directly inside of the edit software. Every button can do 3 different actions based on how you set it up. This is just to name a few.
However you can’t use FC controllers with other hardware, and the FM3 is fully compatible with midi controllers.
Line 6 or Fractal Audio?
Depends on your budget and what you’re looking to do with a modeling unit.
I’ve owned both and both are really great. To me personally I enjoy the FM3 and FC6 combo more than the helix. I feel like it’s easier to get a better tone but also a bit less user friendly initially. However I have really grown to love the UI and how customizable everything is overall.
I wish Fractal audio could bring out Ax10
Or an FM12
Helix 3.0 👍
Wow! I bet this'll work great for my black metal band, 'Satan's Fistula Insertion'.
I think you could add a 2 button switch for preset up and down and leave the existing setup as is otherwise. See this video: th-cam.com/video/1PtaWLeldvQ/w-d-xo.html
Jesus loves you!!!!
Lindo sons, glória a Deus, pena que um equipamento aqui no meu país, Brasil, custa o preço de um automóvel zero quilômetro. mas parabéns pelo som.
buy axefx3 if you need extra room for fx
Mama says overdrive is the devil
Where do u get the axe fx fm3?
Fractal Audio's website. They sell direct. Check reverb.com for used
@@SomeSortOfSound thank you my friend
Sound quality: excellent
On-the-fly user experience: lacking
Price point: difficult
Overall value: ehhh
*Update: was recalling the Axe-FX III price, which is significantly higher than this unit
I've almost sold my entire board several times but just can't do it. Was using the Stomp and now I'm using the Iridium with my board. Just can't get away from it because of the ability to adjust on the fly
@@cour1988 To be fair, I should probably clarify when comparing it to the Helix Floor.
@@Wells306 ah! Well I'll just see myself out. 😁
@@cour1988 Ha! **Cue Homer Simpson bush gif**
However, you definitely can't argue with instant flexibility and ease with something like an Iridium, though!
Eh, I’m not sure if I agree. Compared to a Helix Floor, editing on the fly on FM3 isn’t quite as intuitive, but once you learn the unit it’s really easy to do anything you’d want to.
Price point wise, the FM3, FC6, and the expression pedal will cost exactly the same as a Helix, so ‘competitive’ is the word I would use.
Many people think the FM3 is a Stomp competitor, but it is far more capable than the HX Stomp (and likewise more $$$).
Gospel music was SOOOOOOO much better, before singers started repeating the vocals, over and over and over again. Yuck. Nice pedal rig though.
you can get fm 9 in that price😂
This was long before that was even a thing our available :)
Please remember, while beautiful music that is focused on Christ is appropriate for a church service, that should not be the focus for the true believers. The message of Christ Our righteousness, living a holy life, and preparing to be translated should be the main theme, not emotionalism or showmanship.
First
Man it'd be nice if it went to scenes automatically after selecting the preset.
Yes that would be ideal
One amp is definitely more cohesive than two hard panned amps when mixing.
Sounds great!