How To Replace 2004-2008 Ford F150 Pressure Power Steering Hose
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- This video will show you how to replace the pressure power steering hose on a 2003-2008 Ford F150. Buy Power Steering Hose: amzn.to/3E0MHHn
#autorepair #diyautorepair #fordf150
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages, or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential, or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
Buy Power Steering Hose: amzn.to/3E0MHHn
Great video. I just changed both. Pressure and return. My 07 has no pressure sensor. I read the instructions about half way through. On mine the fitting on the pump is a quick disconnect. Should be able to pry between the nut and the square piece on line and it will pop out. I did it the way you did. My return was rusted through and stuck in the rack. I used a heat gun and finally got it out. 2 lines,5 hours out in the gravel. Getting too old for this chit. Lol
I'm doing the timing job on my 09 f150 so I decided to change out the leaky ps high pressure line while I had easier access. Well, it's STILL a huge pain. I know the dealer wanted big money to replace it. Thanks for the video!
Hope the video helps you out. Thanks for watching!
Some tips to make this job a lot lot lot easier from reading the forums is, remove the fan and fan Shroud it will give you an infinite amount more room, and in order to not have to cut an 18mm is to pull the pulley off.
This video was helpful not a lot videos or forums on this, I was replacing my power steering pump when I bent the line and had to replace it
Thanks for watching! Don't forget to subscribe!
Better to make the wrench than to spend an hour pulling the pulley off and reinstalling it.
@@recrdholdr Pulley comes off in 30 seconds with a puller.
@@TheDivergentDrummer Which puller, did you use?
Practically everything on the 04-08 F150 is a pain in the ass to work on.
Hope our video are making this an easier process for you. Thanks for watching.
You can say that again. Possibly one of the most miserable rigs I've ever worked on. My '10 F150 fights me every step of the way.
You guys are a real dream come true you know that
Thank you for checking out our auto repair video. Have a great day!
By far, the best way to replace the HP power steering line.
Thanks for watching
Been looking for tips how to take this precious line that ford have designed which is nuts, you gave us hope to do it diy with out using a puller, thanks and godbless
Great video! Thank you for taking the time to make it!😀
Glad it was helpful!
The best video yet. Great job thank you
Glad you enjoyed it!
you are correct! gotta buy/find sacrificial 18mm wrench
lol..Yeah was a pain doing this repair, but the wrench trick helped.
This process is nearly identical for replacing it on the F250 super duty as well.
Whenever I feel cocky in life, I watch your videos to remind me how dumb and useless I really am, lol
Thanks for watching
so i put a new high pressure line on my 05 about 7 yrs ago its leaking about a quart per year this was such a pain in the ass to change i will just live with the leak
I know..nothing is easy to work on. That's why Steve and I make these video to help you guys out.
What is the line just below that one ? With the 10 mm bolt plate? At the 5 minute mark ?That’s the one that’s leaking on mine. You took out the 10mm bolt but only removed the top line. Forgive my ignorance. I don’t know the names and I’m in a pickle
How long did it take to get the line back in? I have not tackled it yet! your video seems to be the best way without having to take the pully off
The entire job took a couple of hours.
"It wasn't super crazy tight." I had the opposite experience. I can't get it to come off so I'm just cutting it off and replacing it while I replace the pump.
It's a tight spot I agree.
Great vid. Love thee accents ehhh Boouston??
lol..Thanks for checking our our auto repair video that shows you how to replace the steering hose on a Ford F150
The high pressure line is on the bottom of the pump ?
I believe it was.
Question: Do you have the specs for the 18mm bolt.( Pump to valve body)..Also the 10mm hold down bolt. (valve body/ 2 lines). For the life of me, I cannot find the exact specs. I dont want to over tighten obviously.
Best video yet Thanks!
Thanks guys!
Unfortunately I do not. If you follow along with the video you should be okay. Hope the video helps you out.
@@HomeOwnerRepair .. yeah no big deal I found them I had to replace the whole rack and pinion along with the lines. Lots of fun. Thanks anyways. Good video
I know this is an f150 but would you say this a similar fix for an 2005 ford 500?
No 100% sure how much time is required.
I have a 2003 ford expedition, the line is broken inside of the fitting and the bolt around it is strip so I have no way to take it out, is there any hose strong enough that I can use over the old fitting to make a new line over the old one for the high pressure line, or do you have any suggest what can be done in such horrible situation? Thank you
Can you get a small pair of vise grips on the stripped bolt to turn it free? Not sure if you can get an easy out in that spot to remove the bolt.
@@HomeOwnerRepair nah there is no room at all, but I did try a small vise grip it goes in circle, I am going to try and weld another bolt on it and take it from there, if not I'll have to change the whole thing or take out the whole differential and try to cut it off, either way it's a lot of work, but thank God it happened in that kind of weather, not the cold weather which would be hell
The hose in your link is not the same as the one you used. It doesn’t have a sensor
I'll take a look at it...thanks
What year is the truck
We state this at the very beginning of the video.
What did you do to the 18mm?
He... CUT (Sacrificeid) the 18mm to make it more SHORT to access to the bolt...! 11:59
Yeah, We had to cut down one of my dad's old wrenches to get it to fit in there.
He... CUT (Sacrificeid) the 18mm to make it more SHORT to access to the bolt...! 11:59
Yeah this was a pain, we had to modify one of my dad's old wrenched to sneak it in there.
What's the name of that line with sensor
High pressure line
It should be called the high pressure line.
Please change the filter; it’s a sacrificial item. That makes no sense.
Thanks for checking us out and the added tip!
I thought f150 was easy
It wasn't too bad.