The COMPLETE CS2 Settings Guide 2023 (Resolution, Video, Audio Crosshair, FPS, and More)
ฝัง
- เผยแพร่เมื่อ 3 พ.ค. 2024
- leetify.com/voo
Best Audio Settings, Advanced Video Settings, Resolution, Crosshair, FPS Optimization, Keybinds, Visibility Improvements, and other tips to Improve Your Gameplay and gain and advantage on your opponents.
Reddit thread about -threads command / using_threads_8_increa...
0:00 Intro
0:48 Aspect Ratio/Resolution
2:00 Advanced Video Settings
5:25 Audio Settings
6:05 Perspective Correction
6:52 Game Settings
7:25 Crosshair Settings
7:45 Crosshair Follow Recoil
8:07 Viewmodel
8:19 Sensitivity
9:14 Zoom Sens
9:35 Keybinds
11:05 Autoexec
11:35 Shadows Low FPS Boost
12:25 FPS Optimization
Patreon ► / voocsgo
2nd Channel ► / itsvoo
Twitch ► / voocsgo
Discord ► / discord
Twitter ► / voocsgo
TH-cam ► / voocsgo
tags: CS2, CS2 settings, Settings, CS2 FPS Optimization, FPS Boost, CS2 video settings, CS2 audio settings, CS2 game settings, autoexec, auto exec, keybinds, launch options, -high - เกม
![ถ้าเธอไม่รักทำไมไม่บอกฉัน - PAPER [ Musicvideo ]](http://i.ytimg.com/vi/pfeBhDda7m4/mqdefault.jpg)
leetify.com/voo
thx to @frequencyCS for help (and he's helped on many other videos as well)
if you're having trouble seeing through molotovs, lowering your brightness and increasing model\texture detail will make it a lot easier.
UPDATES to the information in this video:
MSAA2x seems to be a beneficial setting if your computer can handle it, as in certain positions it gives a significant boost in visibility through grates - www.reddit.com/gallery/18ikmaw
Model/Texture Detail can impact your FPS quite a bit when you're directly next to smokes. heavily PC dependent.
at 11:40 the command that should be set to 1 is actually lower in the notepad, "setting.lb_enable_shadow_casting". the setting I show in the video actually WORKS to get shadows back on, however you may lose more FPS than if you change the other setting.
note: for the FPS tests, I would change the setting, restart the game, launch directly into a demo, go to tick, start, then end after the same amount of time, every time. each test was 70~ seconds and any odd findings I tested 3-4 more times (and some of them in different settings as well). I tried to make sure it was a round with a significant amount of stuff going on including util and kills.directly next to smokes. heavily PC dependent.
you can get banned if you have jumpthrow bind i think
man you're a genius
Also what would you recommend for a cpu+gpu combo for consistent 250 fps?
there is websites for that you shouldent ask voo he dosent know that check pc benchmark and youtube@@habsnyc
I don't think so@@sibbeplaystv3636
for all those guys doing the settings in warmuptime
==Advanced video settings==
*vsync off
*player contrast: minor impact, decide for yourself, many pros dont use it
*multisampling: None if you play native resolution; CMAA2 when upscaling
*shadows: high or very high. Lower settings will reduce viewing distance for shadows. If your system can't handle it, use low and goto 11:35
*model detail: medium
*texture filtering: Antisoptic x16
*shader particle: low
*ambient occlusion: medium
*HDR: quality (gets rid of graininess)
*fidelity: pc dependant and if you use downscaling set to performance
*NVIDIA reflex: enabled when your system is stronger
==Audio==
*eq: crisp (other can better with natural)
*L/R isolation: 50%
*Perspective correction: OFF
*Music: everything 0%
Mute MVP Music when Player of both teams are alive - YES
Thanks
thanks
You're a legend.
ty for this, he said natural on eq profile tho
he said "crisp is ass" not "Pick crips" on eq
I'd recommend putting "show location" under Show Team Positions in HUD, and binding a hotkey under keybinds for team equipment to mouse5 or something similar so you can still get information of your teams available utility. There's been so many times I've died or not been able to see something because the massive weapon icons are blocking your vision. This still lets you keep the information of your teammates position through walls + their HP without too much vision lost.
I added this keybind but it doesn't toggle it only takes it away. any ideas on how to fix this?
What’s your autoexec for it?
@@RauchPotato It's not a toggle, you have to hold your key to see utility / weapons.
If it doesn't work check your console that this command "cl_teamid_overhead_mode 1" is a 1 instead of a 2.
Voo doing god's work as always. Thank you. Cs2 release made me want to pick the game up again and I forgot about folks like you over the years, glad you still going, much love
The first time i'm so agree with a person about preference settings, good explain
THank you for the vid voo, I was confused what audio setting I should have
To clear up FSR, enabling it will render your game internally at a lower resolution, at a percentage of the resolution you have the game set at. Performance being something like 50% and quality something like 90% (these numbers are just rough estimates). Only enable it if you are GPU bound (you are maxing out your GPU at 100% usage). Start with quality and keep dropping it until your fps doesnt increase anymore/are no longer GPU bound, or cant stand the graininess lol
I have rtx3070 and 5800x3d my gpu usage is 100% and i have fsr disabled, should i enable or what?
@@UCnjwYztT1rar-cdS2iexL5Q if you're happy with the fps you are currently getting, no. If you want more, try setting it to quality mode.
im playing @1280*960 stretched. FSR disabled is a must, lol. Even with quality, the graining still looks quite peculiar.
@@irfanysff yeah its definitely more effective for people running native or custom res close to native.
Global Shadow Quality: after the Call to Arms update, setting to Low will disable the shadows from smokes, which can be a competitive advantage in some scenarios (ex: an enemy hiding inside the smoke will have its shadow visible on Low but not on High, because on High the smoke shadow covers it).
you don't need to put autoexec on the launch options, it will trigger automatically if named like that. if you use a different name for the cfg, then it makes sense to put it into the launch options
the right solution for using black bars in cs2 is by marking that little box "Override... set by programs" then you'll get BlackBars 13:37
Should test the input latency on the display settings as well, probably more important than just 5 fps difference
Thank you this video very useful
i always count on voo for cs settings
ty voo
6:05 perspective correction works for me well since i play a bit further away from my monitor. Also this same thing was on by default in csgo, but you couldnt change it. Like it says, if you sit extremely close, turn it off. I personally hear better with it on.
bro what🤣how does distance from your monitor affect what comes through your headphones
DUDE i actually put perspective correction on as well lmao! And its not because I play far from the monitor. Radiant University EP.2 N0ted's Warmup - Valorant. In this video by the youtuber Noted. I did the second exercise where you turn around when you hear the sound and click the head but I recreated it on aimbotz and perspective correction was better for some reason???? WTFFFFF. So I'm keeping it on. I tried all combinations of L/R isolation and perspective correction. I found 0% L/R and perspective correction ON, was the best
ty for making this vid. i wasnt really enjoying cs2 cuz some of my settings are scuffed and too lazy to change it without knowing what to do
This one is super important. TYSM!
7:20
I put my first 100 hours into CS after CS2 came out and couldn't agree more: Keep dynamic + follow recoil on for a while before going static. Static is absolutely better ONLY when your movement/accuracy skills improve beyond rookie status. Also just going to say Don't Peek With W while I'm here. Thanks Voo!
One thing to consider is that texture/model quality is it also affects the bullet tracers. On low they become super large and blurry, which for me makes it hard to keep track of the enemy and where I’m shooting. On medium they become much thinner and less distracting.
I’m still waiting for the option to turn them off completely like in csgo.
On medium, there is a much larger fps dip when a nade explodes inside the smoke. My fps dipped from 600 to 400 on medium and about 20-50 on low. That massive 200fps drop causes a huge stutter sometimes in fights. Locking fps helps with this but doesn't mitigate it fully though.
@@lindaville2577 why in the fuck do you need 600fps though? 200+ is just fine lol
If you learned to read then you'd know. If someone has a 500hz monitor or even 360hz monitor then yes, you need all that fps. I personally don't but like I said, the stutter happens even when you cap your framerate. That effect is greater with less powerful PCs.
@@Dino40917I am using 240 hz monitor and just 200+ it's not fine for me. 300+ it's fine
another thing with 4:3 stretched is that it also makes it easier to hold very tight angles
One alias I made as to toggle the follow recoil setting and change the crosshair colour (red is off, green is on). The jumpthrow bind I feel is worthless in CS2, I don't think I've ever failed any jumpthrow that had anything to do with me messing up the jumpthrow rather than the crosshair placement. I'd say pros have it because they are used to it and not because it's of any use, just like with the aspect ratio.
Omg the toggle crosshair thing is genius, I would keep messing up due to having it enabled/disabled at the wrong time as there is no visual cue to know whether it's on or off. I'll have to try that!
Mind dropping the crosshair bind in here?
Drop it please and thanks 🙏
you can't just say all of that and not drop the bind 😞
Changing resolution also helps for low end cpu's, I have a i3-9100f & GTX 1650 and playing with 1920x1080 medium settings made my cpu run at 100% at 4.0ghz max turbo boost and would also make me crash and stutter so much too but having it at 1600x900 & 16:9 widescreen medium settings makes my cpu run at 60/70%, runs alot smoother n less stutters and havent crashed since
Thanks I topped fragged at 110 adr first game using these.
The Model/Texture setting mostly affects FPS while standing close to smokes, the difference is actually huge
So a lot less FPS with medium/high setting?
@@pyatnica6588 it really depends on the system, for me fps dropped from around 270 to 220 when being near the smoke. I still use medium though because low is too ugly
also has to do with how much VRAM there is
Same happened to me. Affects only when close to smoke.
i ended up upgrading from rx560 to 3070 because of this
Awesome video, really goes to show how much just setting everything to "Low" isn't an "end all" solution to low FPS. The HDR grain fix really highlights that some settings are unintentionally not what they seem and may help in different ways.
Past 5 years been playing with 2000 dpi amd im ok. Recently chamged to 1000 dpi and DAM im now getting average 20 kills per game. It feels much better and i can actual control recoil
you can bind the follow recoil setting so it follows ur crosshair only when mouse1 is held
Is there any reason for the setting “Override Scaling mode set by game and programs?”
I notice a lot pros use it yet it doesn’t seem needed for stretched res, so what’s the point of it? Is there a reduction in input latency with it?
There’s tons of testing that’s been done that shows latency is significantly increased under 800dpi. Optimum tech does great vids on this but basically after 800+ the latency increase is basically negligible but under 800 u start seeing near full millisecond even 2-3 milliseconds when going to 800 to 200. There’s a reason most things advertise minimum for 800. Higher dpi is always best. If u use 800 4.0 sens jump to 1600 half sens in game to 2.0 and watch how it feels more responsive. It’s barely anything but u can notice is if ur running a high refresh rate setup. It’s worth it
thanks
Usually I play good, but now you made me rethink my life. I play on default since always, im shocked how many options people change to play good
Multisampling Anti-Aliasing mode is actually critical that you keep it on 2xMSAA or higher, at least on veritgo. If you have it on None or CMAA2, you can't see through the grate on B site
good call. noted in the pinned comment, thanks for the info
A few weeks ago i had some guy arguing with my that stretched res wasn't a disadvantage and that the people were bigger and easier to hit when the only difference it makes is deleting a 5th of your fov, and im not saying its bad and you shouldn't use it, play whatever you're comfortable with, but it still IS a disadvantage, wether the placebo works for you or not
yay a new voodeo
I was playing on high settings, but i changed it after watching this video. Now my game is lagging, thank you voo 🙂
lol ruff
@@hodlcopter420 It was just because I changed the video setting from widened to full-screen
Would you recommend Gsync on or off with these settings?
good vid, had to watch another video for the autoexec because this one (the text) didnt work.
Вау! 7% это много! Спасибо за связку 👍
no idea how no one came up with this idea ty ik its for views but cool idea!!!!
Thank you based Voo
heard that Niko is actually slowly increasing his sens
wake up babe new voo video dropped
I've heard texture filtering mode lags more in water on higher setting, haven't tested it though.
I binded toggle follow recoil, and i especially use it on pistols, bcs there u cannot learn the spray pattern
Another problem with follow crosshair is it only accounts for the recoil pattern of the gun, not the inaccuracy from moving while shooting, so it can give false confidence when someone sprays and moves.
not rlly a problem tho is it? if u are moving with an ak u wont rlly hit regardless but with an mp u know where the shots are most likely going to go so follow recoil is still useful
thank mr voo
I seem to get more fps with boost player contrast on. You said it cost more fps but you showed stats with higher fps with the option on.
The screenshots of the nvideo control panel were missing a bunch of setting. Was that everything?
10:01 what lol, i use
HE:4
smoke: mouse5
flash: mouse4
molotov: T
(graffity is h)
bomb: 5
while i also have my F key unbound and radar toggle is under Q
These are not videos. These are courses!!! 😍
OMG toggling Perpsective Correction is a gamechanger. why did Valve decide to default that to Yes!?! Thank you!
try disable cpu 0, and test fps benchmark 😊
1080 nvidia reflex ON or OFF?
This is just focused on fps, but some of these ingame settings also increase your latency.
nice video
Rtx 3060ti, fullscreen scaling gpu or monitor?
can someone tell me in audio settings, what the VOIP Threshold should be at?? i don't see it in his walk through and i kinda don't understand it, and also under game settings, buffering to smooth over packet loss? i have a very high end pc.
I hate that the same action can't be bound to two separate keys. I used to play with "Jump" on space, but also on the mouse "scroll down", and "crouch" on CL and "scroll up". Now I can choose only one. And PLUS I can set a weapon in my left hand!!!!
4:58 I think you mean low res enabled, high res disable? Tried enabling it on 1280 and it’s a grainy mess lol
8:19 This is completely true, I used to play on 1.75 sense and 2000DPI, changed to 1.15/800 and started wrist aiming instead of arm aiming and noticed I could micro-adjust and make more accurate shots.
with a sense that high you would have to be wrist aiming rather than arm aiming
Does wjumpthrow work? It wasn't working for months
This video was exhausting to keep up with.
MVP
1600 dpi have less input lagg than 400 dpi, i was playing with 400 dpi 2.2 sens now 1600 dpi with 0.5 sens.
thanks for the video shocked there is no jokes in here like the last video with valorant, or baitF for example lolo
my sens is 400dpi and 1.8 in game its pretty solid
Voo ❤
idk when cs2 was firs released my laptop handled it well for 4 months nicly but i took a break because of exams i came after two months its really laggy and my fps drops very low from 60 to 30 or 1 is there a solution?
I believe you’ve made an error at 11:53. When you change that “setting.csm_viewmodel_shadows” to 1. I think you mean the “setting.lb_enable_shadow_casting" to 1 instead to get working player shadows.
Think you’re right. Tried it with his version and it didn’t work. Gonna try yours
yeah you're right. for whatever reason this viewmodel shadows setting actually does turn shadows back on, but i'm not sure on the impact it could have on FPS so definitely better to use the other setting. I've noted it in the pinned comment. Thanks for sharing, I didn't realize I messed this up XD
My game doesn't show WHO threw smokes/flasbangs etc. in the chat area. How to turn this on? I can't seem to find it in the setting? Thanks.
If that's spelled antisotrophic, I'm now curious what sotrophic filtering would be.
Ok Niko plays with 540 edpi but doest he has mouse acceleration on? It actually matters
I play from 2013 and i never had a jump trough bind, I just do it from keyboard
for me anything lower that native is very shimmery and aliased, fsr is useless at 1440p and lower. Im very sensitive to image clarity. It's funny cuz i was fine with lower res in cs go
I found that Anisotropic Filtering is broken, anything above bilinear looks identical or very similar to x16
It is not broken, just very hard to see the difference. Been like that for 20 years.
can someone help? i get around 300fps but sometimes maybe in a round or maybe once in a 5m or so my fps drops to 5-10fps and i dont understand why my pc consistens of:
16gb ram
rtx 3050
amd ryzen 5600
My game is randomly minimizing after I did this all specs. Also, while gaming, sometimes my click goes to the second screen, even tho is fullyscreened the game. I don'0t know
My cs2 was working fine no lag all of sudden it has started dropping fps to 30 40. Its unplayable it is consuming 40 - 44% of memory.
I have good system specs.
What OS do you need to use for better FPS in CS2, W10 or W11? I've heard that W11 has more FPS, about 7 - 10 more, but has stuttering and is unstable
Op system does not matter
Voo, the autoexec runs without including it in your launch options. Let the world know!
You dont need the autoexec in launch options anymore. CS2 automatically execs the autoexec
I can confirm this
great video thank you so much, also could you make a video for frame rate decrease (ms), is there a possibility to make it for AMD . how much ms is acceptable on game?
Hello everyone, i got a new pc i7 13th gen rtx 4060ti and for some reason from time to time cs2 freez sometimes for a sec sometimes for like 5 sec or more, top right screen appears and ms, fps and pack loss thing for 1-2 seconds and then disapear. i didnt have this problem on my (very old) pc. how can i fix this? thanks
Nvidia reflex boost mode is for CPU bound scenarios. Check the GPU usage using task manager or whatever usage stats app you want, and if it's anything less than 90%, set It to boost. If your GPU is above 90%, set It to just regular enabled.
depend.. if u have modern GPU u can use nvidia reflex. but old GPU will suffer and get stuttering when this enabled. also, if you have stable 300-400 fps nvidia reflex will do nothing other than eat your fps. this setting only work for high graphic game like starfield or something
What about Adaptive Sync (GSync or FreeSync) ? Should we use it or does it add lag like v-sync?
it won't add lag like v-sync, but if you have more fps than your monitor Hz then turn it off
it make your game looks smotther but it caps your fps to your monitor hz to be the smoothes feeling
Source for the reddit post on intel threads?
Considering to change your name to voo CS2? :D
Which one is that sticker on your ak empress?
3x avangar holos (eleague boston i think?) and 1x kioshima gold
21560x1440 is one crazy ultrawide monitor
He’s playing on the the wall by samsung
Anisotropic, not antisotropic lol. Great guide ty!
Hating 1.6 is wild
"+exec autoexec" is one of those settings that drives me insane, like "-freq 144 -refresh 144" when WINDOWS AND GPU IS BLOODY WELL SET TO 144 ALREADY. 👿redundant redundancy is redundant.
Mosto pros play on 4:3 and here I am playing on 21:9 haha. It actually halped me getting a few kills that weren't possible on 16:9.
As someone who has a 21:9 and a 16:9. A game that's primarily based on IQ and not reactions to people coming on the side of your screen, it's not really a huge benefit. Plus the fov increase makes a player model seem extremely small even if they're like 20ft away in game
@@Chains377 it's the same man. A 34" 21:9 has the same height as a 27" 16:9. I agree there's barely any benefit, but there's no downside to me.
@@luizarthurbrito I'm not talking about height. I'm talking about fov. Thr more fov you have the more zoomed out it actually is. Take a screenshot on 21:9 and do windowed 16:9 and you'll see what I'm talking about.
@@Chains377 only if you view your screenshot in a 16:9 monitor, then you'll get black bars on top and bottom which will indeed make the enemy model smaller. But think with me: if you have a 16:9 monitor and play 4:3, the actual enemy size won't change, you just add black bars on the sides. Playing 16:9 just "unlocks" what would've appeared on each side. If I play 16:9 on my ultra wide monitor, there will be black bars on the sides, playing native aspect ratio just adds what was missing on both sides, the actual image in the middle won't change a pixel. The enemy stays exactly the same size if I use my whole monitor, or play 16:9 with black bars on each side. Get it?
@@Chains377watch the video between 1:05 and 1:15. The image in the center didn't change one bit. It's the same thing for an ultra wide!
why mute MVP music when you already have it set to 0%? lol
how come youre still recommending a normal jumpthrow bind? I don't find that i ever miss smokes because of the integrated jumpthrow in this game.
A bind has zero disadvantage so you can just use it because it’s more comfortable and reduces the probability of failing a jumpthrow from 1% to 0%. Also when you jump with mousewheel doing the integrated jumpthrow is pretty hard.
I use 1600 DPI, 6.0 Ingame Sensitivity, 14 Windows Sensitivity, Mouse Accel On
And I don't intent to change it, just because I'm crazy enough
oh and I shoot using spacebar
Yeah my sense was at 2.5 800DPI lol, I will try the lower sense.
mans trying do a ferrari deagle peak 24/7 out here
Try 800 dpi 1.5, which is 1200 edpi, good for consistent aim and fast movement too.
I'm using 1600dpi x 4.94 is this bad?
OK I tried it, my shoulder is sore now lol. I was just using wrist mostly before this. @@John-sp9if
@@Gamantasids yes lol
Anisotropic, not Antisotropic filtering. Great video btw :)
wow im dumb lmaoooo i've read that so many times and not read it right once
are you going to change your name from csgo -> cs2?
how to change the ringtone
1:44 21560x1440p is crazy