10 best and most powerful servos tested for crawlers and rc cars
ฝัง
- เผยแพร่เมื่อ 18 มิ.ย. 2024
- Torque testing the top 10 servo test review for crawler car steering
Savox SB-2290SG Black Edition - snp.link/d37cad2d
Tekin - snp.link/902aaa0e
Reefs 555 - snp.link/495d4bb0
Hitec HSB-0380 Ultra Torque - $183 - snp.link/56e35cc2
PROTEK "Black Label” - $160 - snp.link/96fa38a2
Futaba BLS371SV Brushless S.Bus2 - $175
Savox - snp.link/06e354b7
Spektrum RC S6390BL - snp.link/81659577
Holmes - snp.link/8cda9643
Buy your kits and upgrade parts from this Amainhobbies link to support RC Review: snp.link/6640d084
Join the RC Review Facebook Group here: / 302319827122846 for early videos and extra footage.
0:00 Introduction
2:04 PROMODELER 470 OZ/IN: $100
2:41 HITEC HSB-0380 ULTRA TORQUE - $ 183
3:13 SAVOX SB-2290SG BLACK EDITION - $ 140
3:45 TEKIN T-440 - $ 170
4:20 PROTEK RC 170TBL "BLACK LABEL" . $ 160
4:53 SAVOX SB-2230SG MONSTER TORQUE TALL - $120
5:23 REEFS 555 AKA TRIPLE 5 -$ 126
5:59 HOLMES HOBBIES SHV500V3- $ 120 - ภาพยนตร์และแอนิเมชัน
Thanks for spending all that money and running the test. I'm sure a lot of us benefited from knowing which brands are true to their claims.
You do all these servo test but it's hard to remember which does which to compare, it would be great if you could do a round up at the end, and put them all in a bar graph with overall torque, sorted by power volt X amps, and also them sort for Oz per $ 👍
I agree this information is useless. I give up on trying to remember all this. What a shame too.
@@tonysweet9137 Why is it useless.. If you decide on a servo... a few clicks on the progress bar gives you the information about it. I'm just not sure why would anybody need a 47kg servo in a crawler.. other to use it as a boulder wedge in a quarry...That will break most crawler parts...
@@RCiler Although not useless, it would be a lot more useful if he could give an overview.
@@RCiler not if you set your steering endpoints
@@tonysweet9137 its called pen and paper. You can take notes as you watch the video. Spoon fed much?
torques numbers were
futaba 257
spektrum rc 351
promodeler 391
hitec hsb 506
savox 513
tekin 530
protek 552
savox 223 570
reefs 555 661
holmes 681
Thank you for taking the time and effort to test all of the top dog servos. This is the one upgrade I do to all of my rc’s over anything else! 1st mod of every build...
Appreciate all you do for the hobby Francis. Ordered the Reefs through your Amain link!
Man so glad to be a subscriber of this channel.I love these servo testing videos.Thank you so much :)
This is great edition to the series ...this is all the marbles I know there are other servos you have not covered but this was great...Thanks..
Thank you for posting this video, I’m gonna share the heck out of it!
I really appreciate your review. Saved me a lot of money and time. I love all your videos!! Thank you.
Very informative and useful! really opened my eyes to how much current these high torque servos actually pull. I've always assumed 3 or 4A were the maximum at full torque, but seeing 7A...Wow! Makes it easier to choose a BEC as well.
Just ordered a reefs 555 and castle bec. Thanks for your review👍
We just retested the 555 after months of use and it's still a dominator.
I have found a very cheap, powerful, and fast brushless servo for 23 dollars!!!!!!!!!😮 Gx 42kg brushless servo on ebay. It is unbelievable for the price. It blew my mind... I've ran it at a race this past weekend, and it ran flawless. Very strong, and centered very well. Hope you reveiw it one day! Great video!
good stuff, thanks for that
i like your set up professionally done
cheers
Thanks for all your good work, very interesting.
Thanks for taking the time and producing real life data
The tekin was crazy quiet. Cool video and nice to see someone testing all these for us.
Thank you really appreciate that
Thanks for sharing and ...
One of the best Chanel!!!
Awesome !
Wanna see some more HDPower servos 🙏🏼
My 1st RTR when I got back into RC was a Redcat Gen 8 Axe, and ever since Reefs has been my go to for servos, and Hobbywing for ESC and Motors. I have to Admit I have been thinking about building a purely Holmes Hobby crawler just so I can compare the two top dogs, at least from the word on the grapevine. Maybe on the SCX10iii chassis.
I will add a Thank You, if I haven't already because your review was the tipping point on my 1st RTR and I still think my Axe is the best RC I Own, I did ungrade to an AXE FOC R2 540L 2800KV, for the wheel speed, extra punch, and for the dual mode to also use as a trailing truck.
Great test thank you very much!!!!
Outstanding work!!! 👍
Great video, I’m curious as to why my Futaba A700 “1000oz” servo actually would test at.
Hey Hey !!! merry Xmass my man , I just wanted to let you know how much I appreciate this test , I ended up buying the Holmes hobby servo you tested!!
Finally a video where I can actually the servos being tested
Thanks.👍 I like the hitec with the hi price just because it's so quiet.
Very helpful...Thank-you!
Have you seen the Boom Racing Python servo made to be axle mounted? It doesn't have tabs on the ends but has one rail down the side to mount directly to the truss or an adapter bracket. It looks very streamlined and waterproof with a 45kg rating. I guess you would have a problem trying to use your rig to test it but I sure would like to see how it compares.
You guys are doing an excellent job and I thank you for spending the time and presenting it for us.
Have you thought about how to check the calibration of your rig? It wouldn't be hard to put a pulley up at the top and a pulley at the edge of the table to hang calibration weights.
Thank you 😊 Very helpful!
This is the best crawler channel on youtube
Thank you very much my friend.. you are awesome 👏
You're welcome. We learned a lot too.
excellent ! thanks for that info
Mines the Holmes hobby one but I have the version 2 it’s been a good servo !
Thank you, thank you.
Holmes Hobbies!.... Nice... Plus we get to see the owner... He is a cool dude...
He’s one of the best things about his hobby
Thanks for the work! A chart would be nice.
Rc review , I would love to see you guys test the reefs 777 as i just bought one. My friend went with the raw 500. We are both pleased with the strength and speed of the reefs and at that price point there is no comparison.
Aren't those like 500$ servos?
Sure did enjoy this💎😎
That reefs 555 looks like the best deal of the bunch!
thank you, spending your hard earned money 💰 💵 💰
So we don’t have to 😃
Can you test some ProModeler servos
Homes Hobbies and Reefs make some nice products.
Yay just purchased my Holmes hobbies shv500v3!
We won’t steer you wrong :)
RC Review haha no pun intended. Should go great with the 8247x servo horn and ssd brass portal covers on my tactical. Any brushed motor upgrades you would recommend or is the 21t titan motor good enough for general use?
thank u for the information
What an awesome test! I actually saw this video a year ago, but re-watched it because I am looking for a new servo now. I noticed the hitec servo really had low amp draw, is it because of the regeneration feature? Also, does this hitec servo with regeneration (current back flow) feature cause problems with electronics like the castle esc’s or othe esc?
Wow... Pretty impressive results, dude!!! 😮
Could you please test some from Banggood? Any brand, really... Because it's my only option to buying stuff here. 😕
Been using Bluebird brushless titanium alloy geared servos for my 1/10th and 1/8 crawlers and they have never failed me. I suspect they will last forever. Also have some Savox which are equallly good but more expensive...
These are so helpful!! I really like these test, As I am looking for a servo to replace my stock X Maxx servo. I’ve found a few other servos that I wish I could get the true specs of like this test your doing. Hitec/RCD 36845 Hitec D845 on ebay for $108.00. JX Servo HV734MG on eBay for $50 to $60, Reefs 500 High Torque for $130.00, PowerHobby 76MG for $110.00 and the Savox SW-2210SG for $100...
My favorites are the Reefs 555, Protek 370TBL 650oz and the Holmes SHV500.
You honestly need to test the new Holmes against the 3Brothers RC direct current servo.
FC previously tested both direct current servos. This is an update for Holmes; but, could not see what voltage was used due to banner being in the way of the meter...LOL
I'm a Reefs fan, but that new Holmes Servo looks fire!!!
@@ctsteve1967 Not any more...The Reefs RAW 500...LOL
I was a fan of JR back 20 years when I was racing qscale. Are they still around and good quality?
I recently bought the Reef Triple5 and I love it, I actually think is it waaaaay too much xD
Then the 444 might be your cup-of-tea. The 555 is the same servo with steeper gears for more torque but slightly less speed.
The 500-Raw is way faster than the 444 with just a hair more torque than the 555.
A three figure $ervo!
I have the Triple 4 and the Triple 5; the 5 is definitely a little slower than the 4, but has mammoth power!
Which micro servo would you recommend for the trx4’s?
Is the Hitec at 2:40 really only drawing 1.8 amps at max torque? That's a few times more efficient than the other ones. How do they do it?
With a bunch of them you see a downward trend due to heating up. It would be interesting to see how servos hold up with repeated pulls over an interval and where they stabilize. Something like 20 or 30 pulls, 10, 15, 20, 30 or 60 seconds apart and see how their performance changes over time.
I like the G13. From 3 Brothers RC running straight from a 3s battery.
We tried to get that and the G12 but really limited availability.
You need to factor in the current draw. Some are drawing 8 or 9 amps to make that torque which they may not have when connected in RC system. Some also get hot and then perform a lot differently. In many applications it is about repeatability and accuracy more than max torque.
What about all the noise from them? What was the quietest?
How come the Holmes 550v3 is tested at 10V?
I would like to see you test the power HD lw25kg. I ran mine hard all summer and it held up great. It really shines with a cc bec set to 8.4v.
Would like to see where the actual rating is for the Reefs Raw 500. I really like it. Very quiet and really fast as well
😃🙏
That’s the best servo I have purchased so far. I have thousands of dollars into rc parts and that was the only servo so far that has been worth the money.
i want to ask that can i use MG995 servo motor on 7.4 V , will it burn ? or work normally ?
Great info!
Do you have this for cheapo servos also?
I have been using the ZOSKAY 35kg servo with great results!
Subscribed!
He just did a video on the zoskay 35kg not putting out near what they claim
What steering servo should you use on the Xmaxx RC truck my 2085X keeps blowing out every other time I use it should I use the savox 2290
Shot in the dark with this question really need an answer PLEASE. Will running the blue Savox h2o proof servo blow my trx4 ESC out, even if I'm running a castle micro x and castle 2.0 BEC at 5.4 v? Appreciate any help before i install it.
What steering servo would you use for the X max truck I keep blowing out the 2085X steering servo every other time I drive my ex Maxx truck
Any recommendations for a quality servo that is fully compatible with a stock Kraton 6s RTR?
Hi; Thanks for sharing all the info and clearing up some of the claims out there. I looked at the SAVOX SB2230SG site and they run it at 7.4v. You did it at 8.4v @ 41.6kgs if I am correct. Can you check it at 7.4v as they claim to have a torque of around 580 oz and give me an answer if it still stands up to the test.
Great Video. What would you get for the X maxx?
The 3 Brothers seems to be the best deal in premium Servos...
No need to announce the Savöx - the NOISE gives them away!! 😜
Carmine ✈🚂🚙
I just bought the axial scx pro with the kraken Cassie what servo would you suggest? I will be doing some small competitions but mostly trail runs thx.
I bought the Powerhobby 300BW
for my plane. I can say. I am impressed. Smooth and fast and powerful. Who makes those servos for them? $49 too. I do think AGF servos are low resolution.
Great comparison servo vid. Want to know your thoughts on the futaba hps cb700 servo. Thanks
also, why testing at 8.4v if it's not recommended
to run these servos at that voltage?
FC...Awesome effort. What voltage was the Holmes SHV500V3 tested at? Could not read the voltage meter with the banner running across it. Thanks.
It was tested at 16.8 volts. It's crazy strong but it gets hot and it's flexing our test machine.
We have . avideo too of it pulling at 14 volts and that and 11 volts are better for it. Very strong and stable th-cam.com/video/trgpe-b84PM/w-d-xo.html
Is the reefs Raw 500 good an will fit n a kaiju? N do I need a BEC?
The tekin did not make any noise. Is the sound muted or is it really that quiet?
We can assume the comparison of outputs between tested servos but the values we should take at face value. Also note that if one wishes to invest in a stronger servo one should also consider the investment of replacing plastic steering components with metal ones as the strength of some servos quickly flog steering components to consistancy of soft ice cream.
Hello, i have the hobbywing xr8 SCT ESC with the built in 15amp bec. Could that esc handle two high torque jX servos for a monster truck build? and I have lights too. thank you,
Hi, Which is the best servo for traxxas trx4 defender?, which one do you recommend?, thank you
I got a Savox 1231SG in my TRX-4. The traditional Savox hum is mostly benumbed by the stereo headphones I usually wear. I don't know if it achieves its claimed 444oz at 6.0V but it rarely suffers a 'stall' while crawling my 7+lb truck. It's NOT rated waterproof, but at $69.99 on Amazon, I don't much care being I live in the Ca. high desert. I may buy one for my RR10 Bomber if the OEM servo ever fails.
I seen you had a JX Hv servo in the line of servos to be tested in the video, but never tested it? I have 3 Jx Bls7132 HV servos they are supposed 5o have 32kg at 7.4. If you have this servo, can you test it and tell me the results? Thanks great video!
Big thanx for all the servotest you put alote of money on, a huge thanx fore the rest of your videos to ofcours. Do you have av Futaba HSP CB700 sbus2 that you maybe can do a test on? (Sorry for my english its terrible) but i hope ju shild understand me.
I have one of that servo and i am realy happy whit it in my trx-4 Defender butt i want to know the truth about it. Great chanel i give you five of fice tumbs up 👍🏻👍🏻👍🏻👍🏻👍🏻
Hi can you tell me which one I have to buy I have RC car hsp Wolverine 94111
do you have this for the 1/24 scales?
Great video! What happened to that Element body your left :)
Tekin are the best! Very well made and totally silent with any amount of load!
I would like to see a test on the reefs raw500
Very good info. A video on how you put together your testing jig would be good too. Why did you not just connect the servo output directly to the fish scale?
Hi, how about AR servo, do you recommend?
I found a redcat gen 8 that was half submerged in the mud in a stream. It had obviously been swept downstream and it was there for awhile because it was oxidized to hell. Everything was completely waterlogged.The Savox servo still works and as a matter of fact I still use it in that same redcat after rebuilding it. Testament to quality ?
Gotta see an update on this one. Is the rig still around?
Will the sb-2230sg fit in a trx sport?
What about the 3 brothers g13?
The savox squealed like it was getting killed. I find my various savoxes to be usually loud and annoying. Surprised that the spektrum, Hi-tec and tekin were so quiet! I know what i will buy next.
Hi, is there a smaller steering servo? I have the dsservo's 20 kg and 25 kg. I have a custom build going and really would like something smaller that wont brake the bank! Thanks
Yes there are smaller servo that are about 1/2 as tall but $$$ $^%#^%! and there are smaller used for RC choppers and fixed wing and strong but again they can be very expensive for good one's.
What's the torque rating for the 2230 savox at 6v? I'm running the traxxas 2250 at 6v, because I don't want to harm the other servos, and it keeps stalling. I know your video shows it around 260 oz in of torque iirc and most of the 100$ servos you guys tested at 6v wouldn't be a worthwhile upgrade. I already have a jst lead off my trax-ass id plug to power the lights since I'm running a mamba x and would love to have gotten the shv500v3 but those are harder to find than a monk playing craps in atlantic city. And while I don't care for the savox noise, the mamba x is already loud and I want something reliable and strong. But I'm stuck at 6v because.
Fkng beautiful!👍👍👍👍
any thoughts on the Pro Modeler line of servos? Great series and channel, thanks a ton:)
I have had 4 servos on my 60in rc plane and they have been pretty much perfect the centering is incredible. And they are the best built servos Iv seen yet check out Jon's website has some good stuff about his servos www.promodeler.com/
Can you post a list of these servos and their results?
So, sir the final verdict for the best servo in a scx10 III?
I have to say, the results of these tests have surprised me and left a bittersweet taste in my mouth. On one hand the servos I loved the most have turned out to not have the torque claimed BUT on the flip side, it's encouraging because I realize I'm not crazy for wanting more than "650 oz in" of torque. What I'm saying is, this whole time what I thought was over 600 and 700 oz/in was actually only 300ish and there are legit servos out there that I have yet to try. Thanks a lot! Now I know who has the real deal! Reefs triple 5 and Holmes v3 are what I'll be buying from now on. Only 20 bux more than I spend now anyway 🤷♂️
Do the manufacturers measure with an arm or centered on the shaft?
They official spec is oz/in is 1 inch away from center.
For kg/cm, it's 1 cm away from center.
no protek 370tbl?? thanks. Mine failed after 2 months... :(