Would be good if he could show, at the beginning of the video in more details, what he is going to design. This would make it easier to follow the story.
Educative tutorial, May you please help with some videos for more clarifications on how to add families. I used to find it difficult in some cases. Thank you.
I get "constraint not met" error when I try to change the opening cut size like you show at 6:10 I'm using Revit Lt 2023 and english imperial window (no trim) family template. My offset is set to 1/2". What constraint isn't met?
Great video. My only criticism is that I felt like you took a lot of knowledge for granted, I had to look up other videos to get a basic understanding of sweeps, planes, parameters, etc to be able to follow along with this video.
Hello Balkanec :) Can you explain to me, how to make formula for the department schedule to make procent. You have different apartments with different areas, so you want to make a formula that helps you to know what kind of apartment is. For example, you have 5 apartments from 30-50sqm and that should be arount 30% of all buildings, next you have 10 apartments from 51-100sqm and that would be like for example 45%.If you know what i mean. Anyway, thanks and greetings from Macedonia.
Hello! When I change the thickness of the wall the swap does not change its dimension based on the thickness of the wall although I locked the two frames together. what could be the issue?
Q: 1). When I hovering to the opening cut, it can't select only the window. It select both the window and wall. What should I do. 2) If I want to chance the wall to the panel wall thickness 50mm - how should I do it? Thank you.
Hello, Balkan, thank for your video, I have a problem. I can see a window in the floor plan but in 3D the window does not go thought the wall, either inside or outside. Do you have any advice?
Helpful! Silly question perhaps- but I can’t find anywhere how to add a trim profile to all windows in my project. Just simple square profile exterior trim- the same for all windows. Thanks for your videos.
Great Information. You said you created the window frame with 2 sweeps so you can have 2 different materials or finishes on the window. Is that the only way to create that effect?
Brother you should have to teach everything from beginning bcz it's going difficult to understand for beginners. I think this video is ok for mid level learner's. If you really want to teach so please make videos from basics like revit initial settings then how to draw a plan etc. I hope you understand our problems and consider us. Thank you.
It's impossible to get the window to adjust to different wall thicknesses. I have tried a hundred times, but it does'nt work. It would be much appreciated if you could explain and solve this problem in detail.
Well, I watched a different tutorial and he mentioned that it is very important to constrain to a reference line, and not a wall line i.e. This finally solved my problem, and the window adjusts perfectly to the wall thickness.
Fine video, but you need to high pass your audio. There is present in this video a very obnoxious bass and sub bass presence that does not add anything to your video
Definitely the best REVIT TH-camr in the world. You help me so much to improve my skills. Best regards from France.
Thanks for all the info ! I've learnt so much with your videos ! Don't stop ever!
Would be good if he could show, at the beginning of the video in more details, what he is going to design. This would make it easier to follow the story.
Great informative videos, thanks. I have a request. Could you create a video for a standard paremetric window that can open and close?
Educative tutorial, May you please help with some videos for more clarifications on how to add families. I used to find it difficult in some cases. Thank you.
9:18 don't you want the window to be aligned with the interior reference plane? I thought that was why you made the offset in the first place.
Just so you're aware 6:00 of this video now gives a "Constraints are not satisfied" message in Revit 2024
I get "constraint not met" error when I try to change the opening cut size like you show at 6:10 I'm using Revit Lt 2023 and english imperial window (no trim) family template. My offset is set to 1/2". What constraint isn't met?
Hi, you dont nées to delate the Line to change work plane, you just have to select the plan and move it and drag it in the final position
thanks helpfull
Brilliant your contents are amazing
Keep up 👍❤️
Great informative videos, thanks
Great video.
My only criticism is that I felt like you took a lot of knowledge for granted, I had to look up other videos to get a basic understanding of sweeps, planes, parameters, etc to be able to follow along with this video.
Excellent man
Hello Balkanec :)
Can you explain to me, how to make formula for the department schedule to make procent. You have different apartments with different areas, so you want to make a formula that helps you to know
what kind of apartment is. For example, you have 5 apartments from 30-50sqm and that should be arount 30% of all buildings, next you have 10 apartments from 51-100sqm and that would be like for example 45%.If you know what i mean. Anyway, thanks and greetings from Macedonia.
Love your content
Hello! When I change the thickness of the wall the swap does not change its dimension based on the thickness of the wall although I locked the two frames together. what could be the issue?
Please help me, how to lock and extend the glass made by extrusion in elevation plan. Extend mean I am changing height and width.
Q: 1). When I hovering to the opening cut, it can't select only the window. It select both the window and wall. What should I do. 2) If I want to chance the wall to the panel wall thickness 50mm - how should I do it? Thank you.
Is there another way how to mark an opening cut? Because for me It marks only the wall.
any tutorial about window sill & lintels and their qty of shuttering?
Hello, Balkan, thank for your video, I have a problem. I can see a window in the floor plan but in 3D the window does not go thought the wall, either inside or outside. Do you have any advice?
Helpful! Silly question perhaps- but I can’t find anywhere how to add a trim profile to all windows in my project. Just simple square profile exterior trim- the same for all windows. Thanks for your videos.
Great Information. You said you created the window frame with 2 sweeps so you can have 2 different materials or finishes on the window. Is that the only way to create that effect?
thank you for the video. Can you please tell us how we can have rooms area calculation include window niche when sill height is 0 ?
Brother you should have to teach everything from beginning bcz it's going difficult to understand for beginners. I think this video is ok for mid level learner's.
If you really want to teach so please make videos from basics like revit initial settings then how to draw a plan etc.
I hope you understand our problems and consider us.
Thank you.
When i do the window profile it doesn't show the green line .How do I activate it ?
It's impossible to get the window to adjust to different wall thicknesses. I have tried a hundred times, but it does'nt work. It would be much appreciated if you could explain and solve this problem in detail.
Well, I watched a different tutorial and he mentioned that it is very important to constrain to a reference line, and not a wall line i.e. This finally solved my problem, and the window adjusts perfectly to the wall thickness.
Amazing!
thanks
What was the command at 09:49?
nice explanation please help me " Not getting label dimension panel after selecting all dimensions to create parameter @balkan
excellent ,
Fine video, but you need to high pass your audio. There is present in this video a very obnoxious bass and sub bass presence that does not add anything to your video
👍
Why tf is this 30minutes?!
salom hammaga ozbela bormi ili ozbekchani bladganla vidyo togrisida savolim boridi