ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Build an attic hoist to save your back!
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2024
- My attic pulley hoist is one of my favorite organizational tools, and I only regret not building one long ago! The attic is still a disorganized mess, sure, but now it's a joy to store and retrieve heavier boxes and items. Learn how to build your own by following along.
If you have any suggestions or you find this information useful, let me know. Everything I build is subject to constant iterative improvement!
Disclaimer: I am in no way trained as a lifting/rigging engineer. Build at your own risk and make your own safety judgements.
0:00 - Overview
0:48 - How to rig various loads
1:42 - Lifting/lowering demonstration
5:41 - How I built it
6:23 - Possible improvements
Very simple. I was trying to come up with a similar system, and was waaayyy over-thinking it. Great vid. Thanks.
Thanks! When I searched through videos prior to building this, I remember seeing some real Rube Goldberg-style setups. They gave me a good idea of where to start, but I definitely ended up with the most minimal setup I could get away with. I still overthought it quite a bit, so you're not alone!
God, I want to see you build Home Alone traps!
Nice idea! One suggestion would be to use Unistrut fastened to the rafters instead of the 2x6. A full 10' section would spread out the load a lot more. You could also use a trolley to make moving the load laterally possible if you needed to.
Love that idea! I might take that idea with a trolley as my light-duty shop crane. Even just hanging things for spray painting would be a lot easier.
Actually very helpful. Thanks. I subscribed. 👍🏻
Love this! and I really have been digging your channel! hope to see more videos soon I already binged them too fast hahaha
Appreciate the support so much, you rock! Got plenty more coming down the pipeline soon enough, don't you worry!
Nice. Thanks for sharing. New sub. 🎉
👍👍👍👍👍🤜🤛 you can also hook up an electric pulley system to that if you like.
I thought about it, but don’t know of any that are reasonably cheap and decently fast. I have a Warn 2500 winch but I decided against it because it is just so slow. Boy it could lift some weight though.
@@thehacksquatch yeah but you can get some different speeds and they would definitely help on your back. That’s one of the things I’m thinking about trust me. I have so many problems with my body. It isn’t funny I have bad shoulders, bad knees I have three lower disc in my back that are bad too in my upper neck. I wish they could just disconnect me and rebuild my body. Lol.
Thanks!! I needed to see this.
Cool man
I believe the way you are using this system is only 2 to 1 advantage.
If you were pulling from the bottom, there would be 3 supporting legs, but pulling to the side gives only 2. I'm not a physics guru, but I am pretty sure the leg in hand adds increased mechanical advantage as the pull on it lowers below 90 degrees from horizontal, slowly increasing the advantage from 2 to 1 at horizontal or above to 3 to 1 when the pull is straight down.
Yes, you are correct! I misspoke and added a correction in the video when I mention the mechanical advantage. Thanks for the thoughtful reply.
The way I learned it in physics class is you have tension T throughout the rope, so you exert a force of T at the pulling end, and the business end experiences 2T in this case, since it has 2 ropes pulling up on it, regardless of pulling orientation.
Dude, you make some good content. Thanks!