Aeroccino 3 vs 4: What's The Better Nespresso Milk Frother?
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2024
- Aeroccino 3: amzn.to/3PjoTXw
Aeroccino 4: amzn.to/3YXIoI1
Read more on our blog: craftcoffeespot.com/nespresso...
The Nespresso Aeroccino 3 and the redesigned Aeroccino 4 milk frothers are both really popular milk frothers. Regular viewers will know that I am terrible at frothing milk and I use the Aeorccino milk frothers regularly.
There are two models we'll compare, the Aeroccino 3 vs 4. The Aeroccino 4 was recently redesigned and makes this more interesting. I'll go through the different design, frothing textures, and ease of cleaning for each model.
We'll froth a lot of milk in this video, comparing different settings, different milk (dairy vs oat) and give some more tips to highlight Find out which milk frother suits your needs and preferences, and explore the benefits of upgrading to the Aeroccino 4.
Chapters
0:00 Intro
0:22 Design and Operation
1:30 Milk Settings
2:07 Frothing milk on Aeroccino 3 & 4
3:51 Extra Setting on Aeroccino 3
4:23 Important Tips To Control Milk Froth
5:53 Cleaning
6:25 Recommendation
Affiliate Disclaimer
This description contains affiliate links, and we will be compensated if you make a purchase after clicking on the links (at no cost to you). As an Amazon Associate, I earn from qualifying purchases.
UPDATE: I don't recommend putting the Aeroccino 4 in the dishwasher. After several tries, the dishwasher dulled the bottom electrical connection and caused the Aero4 to spin slower. After a week, the whisk speed returns to normal, but I won't put it back in the dishwasher. Besides, a rinse and light cloth scrub will get out any milk after use. The Aero 4 non-stick ceramic coating is better than the Aero 3. Disappointing issue for an otherwise very good upgrade.
Also, has anyone tried switching the bases for the Aeroccino 3 and 4? Are they interchangeable?
I suspect this is a detergent problem, honestly. If you're using a tab or pod or whatever prepackaged dosage of detergent, those are typically much harsher and will cause issues like this. Those tabs are handy, but they are suboptimal for cleaning. A powder prerinse and gel wash cycle has been the best in my experiences -- the powder is a lower dose and faster, works to break things down without harming the dishes, and the gel is a gentler but higher dose that runs for longer.
YMMV, but worth considering in my opinion!
@@saiaeGreat feedback! I use pods in my dishwasher, so that may be the problem.
@@craftcoffeespot I would just return it then, its already ridiculously overpriced for what it does, a little motor whisk and a heater , so if it cant do what it says then it should be returned. I'm very unhappy with mine and will return it
Thanks for the video. I purposely watched this video to find out if the 3 was dishwasher safe. However your update was interesting as I was going to purchase the 4 based on the fact that is was safe to put into the dishwasher. Thanks again.
I have owned one of these for over a year and have never felt the need to put mine in a dishwasher, just a quick rinse under the tap and a sponge clean with warm water and washing up liquid is more than enough to keep it clean.
You can use the lid to control the milk texture because the lid traps heat and makes the Aeroccino froth faster, leading to a less textured milk. So:
leave the lid on while frothing = faster froth and less foam; Lid off = slower froth and more foam.
Answered all the questions I had. GREAT JOB!!
Thank you! If you have any other questions, let me know!
Great, organized video. Helpful!! Thanks again for your help.....
La explicación más clara y completa que he encontrado hasta ahora. ¡Gracias! No solo sobre las diferencias que hay entre ambos modelos sino también respecto a los diferentes tipos de espuma que da la Aeroccino 4. Y disculpa que estos comentarios te los haga en español, pero es que si bien comprendo el inglés todavía me resulta difícil escribirlo
Thank you! No problem with the Spanish - I translated it and greatly appreciated the kind words.
Great video! Thank you! 🙏🏼
great video, thanks.
Very informative and great video, It would be nice to see the Smeg milk frother compared as well. I was wondering though is the aerocino 4 nonstick coated on the inside like the aerocino 3? I would rather have no nonstick coating since you can scrap it off if you use a metal spoon and since nonstick if pretty unfriendly to the environment.
The Aeroccino 4 has a ceramic interior while Aeroccino 3 is Teflon. The interior is more durable and scratches less than the Aero 3. Can’t say whether it’s nonstick. I’ll look into the Smeg!
Hi like your vdo. Very informative. I m considering to buy aeroccino 4 but just wonder does Aeroccino 4 fit the base and function on Aeroccino 3? We have the nespresso machine that attached with the milk froster on the side. And wondering if we can just swap the unit with the aeroccino 4 so we dont have to use a separate outlet. Thanks
I *think* the base are interchangeable but not sure. If you try it, please let me know, as this has been asked a dozen times.
So on the aeroccino 3 if you remove the metal piece we get a thicker foam? I just bought one and was wondering why the foam was airy and light and didn’t like that. I’ll try that tip. Thank you
If you wanted to add a coffee syrup to your Latte or Cappuccino would you add it to the frother or add to the cup?
In your cup, for sure. Syrup could burn and crust on the frother.
@@craftcoffeespot Thank you
Does the Aeroccino 4 have an audible alarm to notify when the process is finished? I have a "3" and I'm always getting distracted and if I'm late getting back to it, even a minute, the milk has separated and it's useless. If not, are there any other frothers that have this feature?
There is no noise on the Aeroccino 4. Don’t know of any others that have that.
If all you want is airy milk for cappuccino, is it worthwhile to pay more for the Aerocinno 4? Which one one make the airy almost solid foam for a classic cappuccino?
For cappuccino, you only need an Aeroccino 3. Its lone speed is high and creates a thick foam.
@@craftcoffeespot Thank you!!!
Can you make latte art with either the Aeroccino 3 or 4?
Easier with Aeroccino 4. The Aeroccino 3 will be hard as it comes out pretty thick with the regular whisk.
Can you make hot chocolate by choosing the hot milk option and adding chocolate?
Yes!
Mine heats but it stopped frothing. Any ideas of what to do about that? It's out of warranty, but has had very light use.
I had this happen a month ago. Had a weird process of unplugging it, and restarting a few times. Then, it started frothing again…I think the whisk wasn’t being properly attached or cleaned.
I still recommend contacting Nespresso, even if after warranty. They can offer basic troubleshooting. Sorry this isn’t more specific…
@@craftcoffeespot thanks for the response! It's usually unplugged anyway. I'll reach out to them. Thanks again 👍🏻
@@helene420 good luck. Let me know if you need anything else.
Which one do you recommend ?
Aeroccino 4! Check the description for the link.
Are the base’s interchangeable?
I *think* so, but not completely sure.
if you are making a latte for a few people, I guess you need to make one at a time. Is that correct? and how about 1/2 and 1/2 cream
It can make enough for two of you fill it. I’d do a low froth setting on the aero 4 for 1/2 half or cream - I’m sure that’ll get thick.
does this work for oatmilk?
Yes!
Ну так чё брать то в итоге?
what kind of milk are you using?
I believe we shot this video with oat milk. or 2%….I’ve used whole milk and that becomes VERY dense in the Aero 3, it’s like a blob.
Personally, I use oat milk.
it's not true!! I have these two and milkfrother 4 is better than 3!!
Aerochino 4 doesnt work at all for me, i will try one last time today with lactose free milk, after that ive tried every permutation and all i got is hot milk with a tiny bit of froth on top, which i could easily just do in the microwave. So one more chance and then its going straight back to Amazon (hope its paying attention)...
For that milk, you should return it. Some milks don’t froth, usually more esoteric milks or really low in fat/protein milks. No problems with dairy milk, and oat (from Oatly or Trader Joe’s), but some milks won’t froth without the right fat or protein content.
You can try a whole milk to see what’s possible - if that doesn’t work, then it truly is defective and you should tell Nespresso…
I still love the Aeroccino 4. I am trying other frothers, from breville to cheap options, and Aeroccino is the best.
@@craftcoffeespot I got it to work finally, i was about to just return it. The cold setting works really well, i think also the amount has to be very precise for it to work optimally. But i can get fully thick milk now, all the way through, not just the top... So i'm very happy, i trust i can get the hot settings to work also given enough time. Unfortunately its not success proof but thats fine.
@@craftcoffeespot I also think my expectations are very high coming from a proper espresso steamer (it broke), but with these last couple of attempts its pretty much the same and with a ton less work
@@erikm9768 glad to hear you got it to work! Yes, it’s very fickle to volume. Under pour if you want more foam, and leave the lid off as it’ll take a little longer and froth more!
40 dollars is a significant difference, not "only 40 dollars"
Compared to many $1k espresso setups and $4 coffee shop drinks, I find the $40 premium well worth it for a daily habit.
Bro said immutable 😮
😎
Purtroppo non vi verrà mai un vero cappuccino italiano finché non farete un caffè degno di essere chiamato tale 😊
Accetto la sfida😉
Both are too small, need to be at least 10 oz /300ml
Then you need to look at the Breville Milk Frother. It's way bigger and has temperature control. Find it here: amzn.to/42qXojs (affiliate link).
I still like the Aeroccino 4 texture more though.
Buy the Nespresso Barista and is 200 times better
I need to try that one. Can you change the froth temperature with it?
@@craftcoffeespot I don't think 🤔 so I just push the button for different types. Is expensive almost 200 it was a gift from a buddy
Neither. When will manufacturers learn, they don’t heat the milk hot enough.
No way - I’d like it cooler. Getting over 160 F / 70 C starts to burn the milk too.
Do you know of any that are good for milk heating?
@@SamSam-ph3ul both of these heat to 150-160, consistently and quickly.
@@SamSam-ph3ul the Breville milk frother has the best temperature control: breville BMF600XL model.
Both heat milk to a subsequent dense foam that holds up in several coffee beverages cold or hot