FREQUENTLY ASKED QUESTIONS | Let's talk about everything together!
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Hey everyone!
I get asked so many questions on a daily basis all things business and resin!
So why not add everything into a video?
This video covers the following;
Resin
Mica Powders/Opaque Pigments
Moulds
PPE
Sanding
Polishing
Painting
Marketing
Where I Sell
And much much more!
Here are some useful links! But I do mention where I get some products in my video!
My Social Media Pages - linktr.ee/prim...
My sister Johanna's social media sites - linktr.ee/Just...
Craft Resin - craftresin.refr... (10% off)
Resin8 - www.resin8.co.uk/
Craft Resin Community Facebook Page - / craftresincommunity
Moulds - Head to Resin8, Amazon, Etsy, Ebay, Wish, Aliexpress
Storage - Get your bum down to B&M & Home Bargains!
Paint & Gloss - The Range
Heat Gun/ Silicone Beakers - Amazon
If you have any questions at all please drop a comment below!
Thanks for watching and please please give this video a thumbs up and make sure to subscribe to my channel for more videos soon!
Kat from Primrose Designs UK
This is probably my favourite video you’ve posted. 40 minutes of pure good content!
Thank you so much! ❤️❤️
Thank you that was very helpful
Thank you so much!
Love this Kat ! Well done x
Thank you!
Thanks Kat this is a great video. Can I ask the make/model of your mask please? I'm looking to get a new one and it looks like the one I've been looking at. Thanks x
It’s a 6200 series half mask rhyno smart solutions
@@primrosedesignsuk1593 thanks lovely x
Hi Kat, thanks for the video, just wanted some advice on dust, I do cover pieces as soon as I can but still end up with bits😒 and sometimes I get like streaks in the resin that you can only see when tilting and looking in the light, do you know what might cause this?
May be the temperature change in temperate whilst curing leaves streaks!
Needs to be at a consistent temperature. Have you tried a heat mat?
@@primrosedesignsuk1593 I don’t think the temperature changed at all whilst curing this time, I’m in a small room with a heater and I kept checking the temperature x
I wish you had added time stamps so we could jump to certain topics. I just don't have time to sit through 40 minutes of stuff I might already know about.
Hi please can you help me with a problem I have iv made some coasters 2 wks ago but they were too thin so I now put another layer of resin onto to make them a little thicker and they have cracks all over the bottom layer u can't understand why this has happened im gutted this has happened as I wanted to use these just as blancs to make my own moulds I'm not sure if I can salvage these or not by sanding I really don't want to waste all this resin as im on a low budget and used the last of my resin to make these so I can make the moulds then purchase more resin in the nxt few wks pls can you advise me were iv gone wrong xx
Hello! I’ve never had this problem! I often make coasters too thin and add another layer on top but never had them crack before. So this is new to me!
If the cracks are fairly small you could try a top layer of resin over the cracks to fill them.
Lay the coater on top of some cups making sure it’s level and add a clear top coat!
Hope that helps a little!
@@primrosedesignsuk1593 hi thankyou i think its because I didn't sand them between layers so think they are now no good and will have to throw them away. in future is it best to sand between layers and will the scratches show thru x