Just got mine today. Worked perfectly ! My clippers never cut that close ever. I'm not a pro, I just like to keep my baldy fresh. Shout out to The Rich barber. It's definitely on the money !
I just receive the ON THE MONEY 10sec Blade Setter in the mail today, this product really work and it saves you a lot of tedious time adjusting your blades. This product I can stand behind and say. Chuka, the ON THE MONEY 10 sec Blade Setter does exactly what Chuka explains in the video. This is not a gimmick so order your today.
I used to THINK my blades were zero gapped. Great product. I will now clean my clippers more often because I can get them right back "on the money" without taking half a F hour. Thanks for a great product, Sir.
I'm not a barber but I use andis t liners to shave my face and head. I usually let my buddy who's a barber adjust them. Well I was looking on Amazon for blades and came across this blade setter. Received it and new blades and it was easy to set and I must say this is the closest I ever got these clippers to cut. Very satisfied.
This boutta change the game I think everybody gone get one of these. Ima have to get one cause if you look at the last video on how to adjust em the video took about 20 min to explain while this only took a couple seconds....nice invention and its crazy because I was just thinkin bout creating something like this
Just got mine yesterday. Cut a head this morning. The Setter is on point! My early Christmas gift. These will save you time in your cuts. Not to mention saving money from using blades to get crispy lines. Good product.
Just got the the Rich barber blade setter after thinking about it for a while and wish I would’ve ordered them sooner. I couldn’t figure out how to use until I watched the video because i over complicated it but its super easy! I used them and my man wasn’t lying, the lines are sharp with no biting and the edge ups are super crisp! Im glad I purchased them, great product, thank you.
I order 2 on the money 10 sec blade setter..it's the truth and thank you, and you're team for creating it... I love it because I can't set my blades for jack.. it helps me to get the clients hairlines sharp and I don't have to ask my fellow barbers to adjust my blades for ME all the time.. sorry for the run on sentences... love your product...
Hey man, I'm no barber but Ive had many haircuts in my life, better than half a century now, and all I wanted to say here is that I admire your entrepreneurship, your thinking & doing, and positive vibe, all right from where life has led you. You are a tremendous inspiration, and I hope people recognize that in you, as it is much more than just how good you cut hair, but really how deep and clean a cut you're making with your actions. Keep doing what you doing young man, as elders like me tremendously approve and applaud. Keep Moving Forward! (KMF!) 👊🏽
Chuka, let me say this. I am a real straight forward dude whrn it comes to products. Forget the hype, if it's crap I'm saying it's crap. If it's good I'm saying it's good. Anivo blade setter is crap, Andis blade setter is ok but there is a learning curve. This blade setter is a (BEAST!!!) I put my Superlinets and Styliner 2's to the side because it took too much to set them proporly, but this little tool set all of them on the first try and they all hit like crazy. "This is the real deal!!!"
I've ordered the blade setter 2 months ago and it's amazing I'ma black dude do I normally keep a bald cut and it's great on my neck line (cuts very close)no more disposal razors and bumps great product bro
Getting ready to order mine! Blue and red. My wahl detailers, andis ii's and t outliners have been out of commission for the last month or so because I can't get them like i need them. I can't wait to order them!
Hey I ordered the black one for the t outliner and the yellow for the gtx. The gtx(yellow) setter didn't set the gtx blade as close as I like so I tried the black one for the gtx and it set it just right and it also set the t outliner blade just right also. I thought you couldn't use the black setter for the gtx but u can and it works better.
After 7 tries with the Gold setter and my GTX, I couldn't get the cutting blade to sit below the comb blade at all! I tried the black setter and what do ya know...it works.
Bet. I've been adjusting my blade by eye for years. Picked one up today. Thanks for the product. I'm going show all the barbers at the shop this product.
Bro I my blades still mark up my forarm. Both the gtx gold setter and this black one for my outliner 2. Maybe I'm doing something wrong or i don't know but it does set them close but like I said they still bite for some reason😕
I need help for once this whole time it was working for me... But I was installing it with the tool on. After I zero gap I remove the tool and mount it with out the tool
So I just got some Andis exo trimmers and I saw a guy on TH-cam use your on the money blade setter black. And I was wondering why he didn't use the on the money blade setter gold. What's the difference and which blade setters should I use?
How do you fix the small blade from moving once it’s in place and I start . It’s not level. Dipping down at one end. The back blade is loose. Am I missing something? Do I need to replace the dark square thing that it lines up with?
I got Andis T Outliner GTX...will it work for that as well? And how do u put them bacc on the clippers? That's how mine get uneven...trying to screw it bacc on
I just received 2 blade setters the black and the gold. The gold for the GTX blade will NOT work. I readjusted 7 times and each time the small blade goes over the stationary blade a little less than a quarter inch. I finally gave up and tried the black setter with the GTX and it is "On the Money". The black setter and the T-outliner blade is "On the Money' as well. IDK whats up with the Gold product Chuka?
How are you doing Chuka The Barber? I have a Wahl detailer trimmer and other Wahl trimmers and wanted to know if you can please consider making a blade setter for all Wahl trimmers?
Okay so I purchased the blade setter for the GTX blade, but the GTX blade, the top blade is already loose, it comes right out and the screws don't even turn. Is this normal? Even when I put the blade back on top, it doesn't let you slide it, as it stays in place without any tightening, therefore you cant slide the blade to the top. I am lost lol
Hey chuka do you half to buy two of the 10 second blade setters. One for the the t outliner 2 and one for gtx deep tooth andis. Or can the black setter do all andis blades. I noticed on the rich barber website that there's two one for each.
Hey chuka..What happened to the Sunday tv shows u were making....nd why don't you have a video about the gold gtx setter....i thought it was one on here...
My only question is does the blade sitter zero gap the blade because I honestly don’t like that zero Gap because they really don’t cut that great when it’s like that I like a little space between the top and bottom blade so It still cut but not pinching....
2 questions. Is the replacement blade for the t outlined the same for the cordless t outlined? If so can this tool also be used for the cordless t outlined? Thanks in advance!!
I was just wondering with sharpen blades vs brand new blades will you still get the same adjustment and the proper alignment from the ON THE MONEY BLADE SETTER?
I've used this to set blade on 3 different outliners and they all cut and/or irritate my client's skin. I use a very light touch. Any suggestions? I really want to like this product.
I just purchased motified T wide blade from your Web site do I need to a just them when I received them.. I also appreciate your work it's a good look Thank you. and also I'm looking for that video when you a justed the t wide blade with the red blade setter....
Bro mine came in i did it exactly how it shows me to do it but ends up cutting me. I don't know if it's supposed to be that sharp to be able to cut me 😒 I'll try and do it again though
I ordered this setter and my biotin piece will not snap in! So I’m forced to set my blades with it not snapped in. How can I fix this issue I’m having chuka??
Can't lie I did this.. tested on my arm and got that burning sensation as If I cut myself .. and I did lol. For me personally it was a Lil tougher to keep the blade in place while placing it back on the body of the trimmers. (T outliners 2) But they still hit just gotta be light.
Chuka got a great hustle going on. Ive seen videos of the 4 trimmers that are supposed to use their own blade setter-ALL able to be set just by using the black blade setter. H.U.S.T.L.E.R, HUSTLER (Ice T voice).
Aye G it is a lil different than the mirror because when you free handing it on the mirror you can have the blade set to an angle to where it will bite and leave scars
Chuka Torres thank you. I have found that you can't hold it super tight when lining up. I did this....almost backing it down ever so slightly but not really...and it has worked great. just ordered another for other trimmers. what about making one for andis master blades?
I Just wanted to say that the blade setter is a life saver for Andis and Wahl trimmers. I bought both. It worked so good my Andis setter came up missing within the first 3 days. Chucka I saw that you preferred the regular blades in your response but at what point do you use the deep tooth blades? I set mine and they bite just a bit but my regular Andis T blade is On the money.
( perfect!) cause I just bought a second pair brand new andis T- outliners and drop the one of the screws down the sink trying to set them to a o gap..so as I’m ordering replacement screws on the ebay, I was thinking 🤔 is there a blade setter for these and came across you guys ( hope this works easier) thumbs up 👍🏽
i really like it , but can you do a lining vid where you are only lining up so we can see how good it works after setting the blade to a nice adjustment ?
Just got mine today. Worked perfectly ! My clippers never cut that close ever. I'm not a pro, I just like to keep my baldy fresh. Shout out to The Rich barber. It's definitely on the money !
I just receive the ON THE MONEY 10sec Blade Setter in the mail today, this product really work and it saves you a lot of tedious time adjusting your blades. This product I can stand behind and say. Chuka, the ON THE MONEY 10 sec Blade Setter does exactly what Chuka explains in the video. This is not a gimmick so order your today.
The M.A Thanks for the review bro. #salute
I used to THINK my blades were zero gapped. Great product. I will now clean my clippers more often because I can get them right back "on the money" without taking half a F hour. Thanks for a great product, Sir.
I'm not a barber but I use andis t liners to shave my face and head. I usually let my buddy who's a barber adjust them. Well I was looking on Amazon for blades and came across this blade setter. Received it and new blades and it was easy to set and I must say this is the closest I ever got these clippers to cut. Very satisfied.
This boutta change the game I think everybody gone get one of these. Ima have to get one cause if you look at the last video on how to adjust em the video took about 20 min to explain while this only took a couple seconds....nice invention and its crazy because I was just thinkin bout creating something like this
Thanks Bro!
This was the best money I've spent, and it saves you major time... Thanks for coming up with this idea I love it.
Just got mine yesterday. Cut a head this morning. The Setter is on point! My early Christmas gift. These will save you time in your cuts. Not to mention saving money from using blades to get crispy lines. Good product.
Will Ealy Awesome!!! Thx Will!
Thank you!
Just got the the Rich barber blade setter after thinking about it for a while and wish I would’ve ordered them sooner. I couldn’t figure out how to use until I watched the video because i over complicated it but its super easy! I used them and my man wasn’t lying, the lines are sharp with no biting and the edge ups are super crisp! Im glad I purchased them, great product, thank you.
with inventions like this you won't need to cut hair much longer, I just bought two. good stuff brother
I order 2 on the money 10 sec blade setter..it's the truth and thank you, and you're team for creating it... I love it because I can't set my blades for jack.. it helps me to get the clients hairlines sharp and I don't have to ask my fellow barbers to adjust my blades for ME all the time.. sorry for the run on sentences... love your product...
Does anyone know if they would work with babyliss rose FX blade?
Hey man, I'm no barber but Ive had many haircuts in my life, better than half a century now, and all I wanted to say here is that I admire your entrepreneurship, your thinking & doing, and positive vibe, all right from where life has led you. You are a tremendous inspiration, and I hope people recognize that in you, as it is much more than just how good you cut hair, but really how deep and clean a cut you're making with your actions. Keep doing what you doing young man, as elders like me tremendously approve and applaud.
Keep Moving Forward! (KMF!) 👊🏽
Chuka, let me say this. I am a real straight forward dude whrn it comes to products. Forget the hype, if it's crap I'm saying it's crap. If it's good I'm saying it's good. Anivo blade setter is crap, Andis blade setter is ok but there is a learning curve. This blade setter is a (BEAST!!!) I put my Superlinets and Styliner 2's to the side because it took too much to set them proporly, but this little tool set all of them on the first try and they all hit like crazy. "This is the real deal!!!"
StanleyRC1 Thanks for taking the time to write a review bro #salute
You swear by it??
I've ordered the blade setter 2 months ago and it's amazing I'ma black dude do I normally keep a bald cut and it's great on my neck line (cuts very close)no more disposal razors and bumps great product bro
Getting ready to order mine! Blue and red. My wahl detailers, andis ii's and t outliners have been out of commission for the last month or so because I can't get them like i need them. I can't wait to order them!
Hey I ordered the black one for the t outliner and the yellow for the gtx. The gtx(yellow) setter didn't set the gtx blade as close as I like so I tried the black one for the gtx and it set it just right and it also set the t outliner blade just right also. I thought you couldn't use the black setter for the gtx but u can and it works better.
hey my friend...i can across the same issue with the gold gtx setter...you say u get better results with the gtx being set with the black setter?
+Woodrow Kenton Jr. Yes the black one set the gtx and the t outliner blade perfect
After 7 tries with the Gold setter and my GTX, I couldn't get the cutting blade to sit below the comb blade at all! I tried the black setter and what do ya know...it works.
Bet. I've been adjusting my blade by eye for years. Picked one up today. Thanks for the product. I'm going show all the barbers at the shop this product.
just ordered these I hear how good they are so im DEFINITELY going to give them a try......I hope they are as good as I hear
Bro I my blades still mark up my forarm. Both the gtx gold setter and this black one for my outliner 2. Maybe I'm doing something wrong or i don't know but it does set them close but like I said they still bite for some reason😕
Even with a set blade or not it's always a good thing to have a light hand..
Ricardo Guerra i thought I was the only one, seems straight forward but for some reason it marks up the skin.
Chuka keep doing your thing thanks for helping out the average joe best blade adjusters and modified blades
Keith Sanchez Fasho! Thanks bro! #salute
Hey chuka is there one for the wahl detailers? If not when will u plan on making one I love all your products!! Barber love
Great product Chuka! Wish you had made is sooner! I needed this ~15 yrs. ago!! LOL
After I set my blades they cut better than new. Thanks a bunch!
I need help for once this whole time it was working for me... But I was installing it with the tool on. After I zero gap I remove the tool and mount it with out the tool
So I just got some Andis exo trimmers and I saw a guy on TH-cam use your on the money blade setter black. And I was wondering why he didn't use the on the money blade setter gold. What's the difference and which blade setters should I use?
How do you fix the small blade from moving once it’s in place and I start . It’s not level. Dipping down at one end. The back blade is loose. Am I missing something? Do I need to replace the dark square thing that it lines up with?
I got Andis T Outliner GTX...will it work for that as well? And how do u put them bacc on the clippers? That's how mine get uneven...trying to screw it bacc on
They work on the wahl detailer too just push up and hold them in place super sharp without cutting yourself
Wow really thanks 😅 lol. I thought I was going to have to buy another one
I just received 2 blade setters the black and the gold. The gold for the GTX blade will NOT work. I readjusted 7 times and each time the small blade goes over the stationary blade a little less than a quarter inch. I finally gave up and tried the black setter with the GTX and it is "On the Money". The black setter and the T-outliner blade is "On the Money' as well. IDK whats up with the Gold product Chuka?
How are you doing Chuka The Barber? I have a Wahl detailer trimmer and other Wahl trimmers and wanted to know if you can please consider making a blade setter for all Wahl trimmers?
Okay so I purchased the blade setter for the GTX blade, but the GTX blade, the top blade is already loose, it comes right out and the screws don't even turn. Is this normal? Even when I put the blade back on top, it doesn't let you slide it, as it stays in place without any tightening, therefore you cant slide the blade to the top. I am lost lol
Just purchased mine, it should be on the way soon can't wait... Thanks for this product... 😃😃😃
Did it work?
Genius. You will def become a "richer" barber of this. Respect from Florida.
Thanks bro! #salute
Hey chuka do you half to buy two of the 10 second blade setters. One for the the t outliner 2 and one for gtx deep tooth andis. Or can the black setter do all andis blades. I noticed on the rich barber website that there's two one for each.
Hello, can i use this tool for wahl detailer?
Does the back side of the blade haves to b flush cuz mines haves a gap where it suppose to snap at and it’s doesn’t snap
Does this only work for liners, or can i use this let’s say on some Andis clippers?
The trouble I had is putting the blade back on the clippers. Any suggestions.
Will these work on the Andis Pivot Pro trimmer
So I got this but will it also work on my oster t-finishers?
Hey chuka..What happened to the Sunday tv shows u were making....nd why don't you have a video about the gold gtx setter....i thought it was one on here...
bro you are a genius with this one!!! I got to have some for my shop!!!
outthere09 Thx bro!
Would that work on a 38 special caliber T blade?
how about the Andis Slimline pro?
This only for trimmers or can I use this for clippers too like Wahl Seniors?
On The Money is really on the money. Great invention, great product. Love it.
My only question is does the blade sitter zero gap the blade because I honestly don’t like that zero Gap because they really don’t cut that great when it’s like that I like a little space between the top and bottom blade so It still cut but not pinching....
Hey bro I ordered a blade setter on Tuesday.where can I get a update on it?
Can you do a demonstration with the detailer?
It worked magic! Thanks for this great idea! Every barber should try these
2 questions. Is the replacement blade for the t outlined the same for the cordless t outlined? If so can this tool also be used for the cordless t outlined?
Thanks in advance!!
What is holding the top blade you took off? Mine falls off
John cage thx can I use ajuster that comes wahl heros 4 t wide blades?
I was just wondering with sharpen blades vs brand new blades will you still get the same adjustment and the proper alignment from the ON THE MONEY BLADE SETTER?
Yes you will. Thanks
Thanks I just order one.
Just ordered mine today along with the modified blades cant wait to use them!!!
hey Chuka why don't the red setter adjust the blade close...I'm not getting the same results as you do..
Can you use this kb the andis black out limited edition?
Hey Chuka can your 10sec blade setter adjust the t-wide blades or the factory blades of the wahl trimmers?
Thanks bro I ordered mine frw days ago got it in peeped the video and my outliners are crispy smooth like 1000 count sheets👍
So this tool sets it to a zero gap? Or sets it to factory setting?
do anyone have a problem getting the Wahl std blade set close for the dealers
Can u make a video for the styliners I bought the others ones for the outliners they work good but I can't get the styliners working right
Can it adjust styliner 2 blades. If so I'll buy right now
I've used this to set blade on 3 different outliners and they all cut and/or irritate my client's skin. I use a very light touch. Any suggestions? I really want to like this product.
I just purchased motified T wide blade from your Web site do I need to a just them when I received them..
I also appreciate your work it's a good look
Thank you.
and also I'm looking for that video when you a justed the t wide blade with the red blade setter....
Jose Torres yes you do...the blades are modified, not adjusted
John cage thank you..this blade is off the chain once you get a proper ajustment took a few times to get the best ajustment..but got it....
When u buy that does it come w the balde 2
Bro mine came in i did it exactly how it shows me to do it but ends up cutting me. I don't know if it's supposed to be that sharp to be able to cut me 😒 I'll try and do it again though
Did you ever get your blade adjusted correctly? What do you think about the product?
OK. I did see it and ordered mine.
Can you do a video using the setter and use the blade afterwards
Cool. Yes i will do one soon.
Great product! Hey is there a difference between zero gapping and blade setting? Ex. a blade setter vs a zero gapping device.
I ordered this setter and my biotin piece will not snap in! So I’m forced to set my blades with it not snapped in. How can I fix this issue I’m having chuka??
Two little screws inside has to be tight??
When are you gonna do a review on the gold blade setter seen on your website and wat trimmer on those for
Which one do I get for my Andis 29775 trimmers?
Can I use to set my pivot
Can't lie I did this.. tested on my arm and got that burning sensation as If I cut myself .. and I did lol. For me personally it was a Lil tougher to keep the blade in place while placing it back on the body of the trimmers. (T outliners 2) But they still hit just gotta be light.
I bought your product and it works great and easy to use. Great Idea!
is there going to be something for the wahl detailer/hero blades as well?
Yes.. In about 2 weeks.
***** ok. thats whatsup. thanks
***** i see the wahl OTM blade setter is now available. thanks bruh.
Chuka got a great hustle going on. Ive seen videos of the 4 trimmers that are supposed to use their own blade setter-ALL able to be set just by using the black blade setter. H.U.S.T.L.E.R, HUSTLER (Ice T voice).
Aye G it is a lil different than the mirror because when you free handing it on the mirror you can have the blade set to an angle to where it will bite and leave scars
Esse também serve para a Andis GTX?
I have a few of these. the styliner 2 hit too hard and cut clients. any fix to this
Rick Boone when you do the adjustment don't twist the center tension screw too tight.
Chuka Torres thank you. I have found that you can't hold it super tight when lining up. I did this....almost backing it down ever so slightly but not really...and it has worked great. just ordered another for other trimmers.
what about making one for andis master blades?
Can you modify promate blades ?
Does this work with the deep tooth blade? Bc it seems to cut skin..
I Just wanted to say that the blade setter is a life saver for Andis and Wahl trimmers. I bought both. It worked so good my Andis setter came up missing within the first 3 days.
Chucka I saw that you preferred the regular blades in your response but at what point do you use the deep tooth blades? I set mine and they bite just a bit but my regular Andis T blade is On the money.
Just got mine in the mail today!!!!!!! 👍👍💪💪
I'm in southern Cali.if I order the blade setter you think il get by Saturday?
Does this work for andis t outliner cordless model?
Where can I get one to buy and how much are they
( perfect!) cause I just bought a second pair brand new andis T- outliners and drop the one of the screws down the sink trying to set them to a o gap..so as I’m ordering replacement screws on the ebay, I was thinking 🤔 is there a blade setter for these and came across you guys ( hope this works easier) thumbs up 👍🏽
Do they make these for Wahl taper 2000?
Hey bro I used it on my promate blade but it barely fits ? Is it not ment for that particular blade?
Jerry Ortega No it doesnt work with the promate blades.
does this work with the modified andis t outliner blade from your website or just the normal out the box blades?
rick entrega no brazil brother?
A quick question, would you do this before or after using the "Blade Modifier"?
after
What do suggest when setting blades for kids?
Depends. If they're really young like 3, then you line them up with clippers anyway.
Hey chuka will this setter work for the gtx blade
Woodrow Kenton Jr. no. The gold on is for the gtx blade. Sorry for the late reply.
Great job Chuka this aligned my tblades perfectly.
Kendall
Is it compatible with promate blades?
when u gone get the style liner 2 adjuster very interested
mike feliciano out now
***** i meant to say titanium blades dont fit please make 1 for those it a lil to small i purchased the other 2 as well
Ordered mines Friday...Question Chuka, if i use just the blade setter without the blade being sharpened, will they still hit like money
XxCJ100KxX You will get a good adjustment but it won't be like if you used it with our modified blades. Thx
Will this also work ? on the mod blades for the t-outliner
bernard smith yes
i really like it , but can you do a lining vid where you are only lining up so we can see how good it works after setting the blade to a nice adjustment ?