I have a 1989 Mazda 323 Hatchback, the engine and everything is the same as your '88. When I do a timing belt service on it I always replace the timingbelt & tenioner, waterpump, coolant, fan & V belts and both radiator hoses. That way I don't have to worry about anything except oil changes and tune-ups unttil the next belt job pretty much. My little car currently has 480,000 miles and still going strong. I still get 30 mpg and can still spin the front tires. Thanks for your video.
My South African-built Ford Bantam 1996 model pickup has the identical B6 engine. I am busy replacing a blown head gasket and need to take all the stuff off that you did, except for the water pump to get the belt off the sprockets so I can lift the head. This was very informative and thanks for the video!
Awesome. I recently bought a 1990 Mazda 323 Astina and am planning on doing this. The engine bay looks mostly the same so this video and the service manual should come in handy. Thanks for doing this video.
Okay, following your video I was able to complete my water pump replacement in about 4 hours. Regarding the physical removal of the old pump, I too had difficulty getting it through the confined space out the top. So I removed the front engine mount and using a jack under the sump lifted the engine up high enough to free enough space to get the old pump out and through the crack. Thanks again for great video! Jon
This is a really good video. Great pace and very informative. I have just blown the water pump in my ford laser (mazda 323) and was hoping for youtube video to help - exactly what I wanted. Thanks Ed
Nice Fix don't know if I would have done that much work on an old car but I have a forklift with that motor so very informative and helpful for me to tackle a similar job. Thanx Again !
Just discovered this video as I`m due to replace my Mazda`s timing belt. Great video, thank you Sir. Ohh and I could not agree with you more of the safety aspects, very wise ...
Just did the water pump in my 1988 323 today. Removed power steering unit and motor mount which is much different that yours. Enjoyed watching you do the same thing I just did. ;-)
Thank you ! You have done a really good jobs on this video , i am learning from you now , do on my dad 's car water pump and timing belt change over this weekend
thanks mate, i did mine yesterday, not the same car as yours ford festiva 91, similar engine though B3,MAZDA 121, had a hell of a time removing pulleys from the crankshaft, no room, i had to remove top engine mount and then jack up the motor far enough to wriggle the two pulleys off. one pulley wasn't being used so tossed it and now in future i wont have any trouble doing same job....
If you check out the comments on this video you will read that a few folks like Jon and South Florida Railfan had to remove the front motor mount as their engine was a little different. Just another step to keep in mind if you are not able to physically pull out the old water pump.
Just did this on a 91 protege...looks the same except some jakess decided to mount an AC compressor in front of the 2 bolts holding lower radiator hose housing. Ridiculous...2 hr job with a bonus hour of trying to get that bottom bolt + 45min of removing/installing accessories. Thanks for the video
Thank you for posting the 323 water pump video. Seems though some steps were missing like removing oil dipstick to get the old water pump up and past the power steering hoses, or removing AC compressor for same reason. Otherwise very helpful video
fantastic video ed..am a mazda fan and if truth be told an anorack as well ha ha..im now working on a mazda 2 1.4 cd and replacing the head gasket.im very shortly putting a video of my pain and suffering.but again a great vid ed..
sorry to hear about you uncle , this was a very helpful video . i'm going to tackle my mazda 2 timing belt in a few weeks time but i can't seem to find any guide on it ... its a 2004 but i'm wondering if its the same procedure.
great video I was able to pull my water pump out through the Bottom by removing the alternator bracket can write out by the crankshaft video helps a lot thanks have you had any luck finding a good radiator that fits
7:03 I threw this spring out of my car and relied on the screw only because I cannot return it due to the lack of space. Does this cause damage to the engine?
great video Ed, thanks. trying to do the same on my wife's 1993 323 Familia, however its a DOHC 1500cc motor and I've run into a hurdle as I cant seem to remove the timing belt off the crank pulley as its obstructed by a face plate which seems to be integrated into the pulley. Any ideas folks?
Stefan have just done mine, its the same car. You have got to remove the crankshaft bolt, to get to the belt.Jamb the pulley with a large srewdriver and it will come undone.
I cut off the damaged part of the pipe as in the video in time 18 minutes and i put it back to how it was . and I didn't change the pipe. it no more leaking any water
Mac Chavez usually you replace timing belts at recommended service intervals. If it breaks there's a whole other set of problems you can run into (bent valves, cracked pistons). The water pump is usually replaced at the same time just to prevent taking everything apart again if it fails. This guy suspected a bad water pump...I think he mentioned it at the beginning.
This was 10 yrs ago, very helpfull video for my 323 interplay, I plan to replace waterpump, many thanks
I have a 1989 Mazda 323 Hatchback, the engine and everything is the same as your '88. When I do a timing belt service on it I always replace the timingbelt & tenioner, waterpump, coolant, fan & V belts and both radiator hoses. That way I don't have to worry about anything except oil changes and tune-ups unttil the next belt job pretty much. My little car currently has 480,000 miles and still going strong. I still get 30 mpg and can still spin the front tires. Thanks for your video.
Tell your car I congratulate him
10 years later and you're helping me do the water pump on my 1993 Ford Festiva Ed you're a life saver
My South African-built Ford Bantam 1996 model pickup has the identical B6 engine. I am busy replacing a blown head gasket and need to take all the stuff off that you did, except for the water pump to get the belt off the sprockets so I can lift the head.
This was very informative and thanks for the video!
I greatly appreciate your technical support, dear friend
Thank you for the time and effort you put into this Ed! Watching your video gave me the confidence to replace my 1990 Ford Laser water pump. Cheers!
Awesome. I recently bought a 1990 Mazda 323 Astina and am planning on doing this. The engine bay looks mostly the same so this video and the service manual should come in handy.
Thanks for doing this video.
Great video well explained Thank you
Okay, following your video I was able to complete my water pump replacement in about 4 hours.
Regarding the physical removal of the old pump, I too had difficulty getting it through the confined space out the top. So I removed the front engine mount and using a jack under the sump lifted the engine up high enough to free enough space to get the old pump out and through the crack.
Thanks again for great video!
Jon
This is a really good video. Great pace and very informative. I have just blown the water pump in my ford laser (mazda 323) and was hoping for youtube video to help - exactly what I wanted. Thanks Ed
Nice Fix don't know if I would have done that much work on an old car but I have a forklift with that motor so very informative and helpful for me to tackle a similar job. Thanx Again !
thank you soo much. we've been struggling just trying to remove the water pump. helped us heaps. thank you again :)
FANTASTIC , i was stuck with something and you've explained just what i needed THANK YOU .
Thanks for your tutorial video... I replaced my mazda 323 waterpump in 1 day and saved a lot of money... God bless you...
Just discovered this video as I`m due to replace my Mazda`s timing belt. Great video, thank you Sir. Ohh and I could not agree with you more of the safety aspects, very wise ...
Just did the water pump in my 1988 323 today. Removed power steering unit and motor mount which is much different that yours. Enjoyed watching you do the same thing I just did. ;-)
Thank you terribly much Ed. you have just made my partner very happy as to what to fix tomorrow. thanks again :)
Awesome Job Ed!
I need to work on my 1992 Mazda Protege' and this is looking very similar. Feeling encouraged to tackle the job. Thanks for the video.
Great video Ed ! Thank you for posting.
Thank you ! You have done a really good jobs on this video , i am learning from you now , do on my dad 's car water pump and timing belt change over this weekend
thanks mate, i did mine yesterday, not the same car as yours ford festiva 91, similar engine though B3,MAZDA 121, had a hell of a time removing pulleys from the crankshaft, no room, i had to remove top engine mount and then jack up the motor far enough to wriggle the two pulleys off. one pulley wasn't being used so tossed it and now in future i wont have any trouble doing same job....
Fantastic video; very much appreciate your sharing of this video. I'll be doing the same to my 1988 323 very soon.
thanks much for this video.i changed my water pump and saved myself couple of bucks
A very helpful video Ed. 👍
I thanks you and my impact wrench thanks you. It was struggling to budge the bolt and it would appear that I didn't even need to touch the bolt.
nice video, makes me feel a bit more confident going into my own '95 323
If you check out the comments on this video you will read that a few folks like Jon and South Florida Railfan had to remove the front motor mount as their engine was a little different. Just another step to keep in mind if you are not able to physically pull out the old water pump.
What a legend
What a fantastic job with the video, nice work!
Thanks for this video, sir!
Just did this on a 91 protege...looks the same except some jakess decided to mount an AC compressor in front of the 2 bolts holding lower radiator hose housing. Ridiculous...2 hr job with a bonus hour of trying to get that bottom bolt + 45min of removing/installing accessories. Thanks for the video
mazda 121 same problem im stuck on that last bolt with a ac unit in my way
Thank you for posting the 323 water pump video. Seems though some steps were missing like removing oil dipstick to get the old water pump up and past the power steering hoses, or removing AC compressor for same reason. Otherwise very helpful video
fantastic video ed..am a mazda fan and if truth be told an anorack as well ha ha..im now working on a mazda 2 1.4 cd and replacing the head gasket.im very shortly putting a video of my pain and suffering.but again a great vid ed..
Tri makasih sangat luar biasa. Membantu saya sukses selalu
sorry to hear about you uncle , this was a very helpful video . i'm going to tackle my mazda 2 timing belt in a few weeks time but i can't seem to find any guide on it ... its a 2004 but i'm wondering if its the same procedure.
best DIY video ever!!!!!!!!!
great video.Good job
Thank you!!
Cheers Ed.
great video I was able to pull my water pump out through the Bottom by removing the alternator bracket can write out by the crankshaft video helps a lot thanks have you had any luck finding a good radiator that fits
Right on the money!
thank you for your video. i need to do my mazda 323 astina 1991 Water Pump.
7:03 I threw this spring out of my car and relied on the screw only because I cannot return it due to the lack of space. Does this cause damage to the engine?
Excelente me fue muy útil este vídeo.
Hola amigo ese tubo va con algún pegamento o así nomás a presión
awesome video.
Thanks ian!
wow .now i have this problum.!!!
What was that pipe called that had the bad o ring that was leaking. Part number and here did you get it?
great video Ed, thanks. trying to do the same on my wife's 1993 323 Familia, however its a DOHC 1500cc motor and I've run into a hurdle as I cant seem to remove the timing belt off the crank pulley as its obstructed by a face plate which seems to be integrated into the pulley. Any ideas folks?
Stefan have just done mine, its the same car. You have got to remove the crankshaft bolt, to get to the belt.Jamb the pulley with a large srewdriver and it will come undone.
helped me out alot thanks man
how much its that tensioner coz i have a mazda 323 and that its moving must be replaced
I cut off the damaged part of the pipe as in the video in time 18 minutes and i put it back to how it was . and I didn't change the pipe. it no more leaking any water
nice love the video. But was that a GT and am looking for a right side cv axel can you help
You got the tension ball spring wrong, my friend.
Nice tuto ;)
What’s the torque specks for intake manifold
7:05 What is the use of this spring?
Hey Ed how long did it take you to do the whole job?
Excelent !!!
Hi bro would you know where the crankshaft sensor is located pld
No idea
great job ..... the engine is 1.6 8valve or 16valve and who many horse power 101?
its probably the 1,6 8 valve 85hp.
How to just replace the thermostat? Cheers
Bulletproof engine used in wrc with turbo added
Tension ball, spring part incorrectly installed.
Should have removed the dipstick tube to get the pump out
Thanks for that reminder 73bobster. As I do these jobs over and over some of the simpler tasks that need to be done get taken for granted.
Please show us how to overhaul
nice and like
What engine?
How to get that manual book bro?
Is a 121 the same
Did your car not start? Is that how you knew it was the timing belt?
Mac Chavez usually you replace timing belts at recommended service intervals. If it breaks there's a whole other set of problems you can run into (bent valves, cracked pistons). The water pump is usually replaced at the same time just to prevent taking everything apart again if it fails. This guy suspected a bad water pump...I think he mentioned it at the beginning.
@@stephenwgreen78 SO.. while your in there why not the F main seal as well?
@@914_werke probably a safe plan.
Good
Just timing how to setup exactly muck
I own ford laser 1.5 ,year 1991
im from the future.😅
اصل کار که جا انداختن تسمه بود و نشون ندادی!! و همینطور روش جا گذاشتن بلبرینگ تسمه سفت کن و نشون ندادی!👎
its have a piss at 1:48 lol
Sonalika rayno taiming setig