The casters might support 1000kgs as a set but the fasteners won’t hold bc it’s screwed into the side edges of your plywood. It would have been better to use 2x4s or 4x4s for them. I’m sure you know this but someone not familiar with wood working might not know this.
Very nice. One observation about woodworkers in general is, that most spend an inordinate amount of time buying tools , building their shop, buying more tools , improving their shop, buying more tools , making their shop larger , buying more tools etc. etc. 😳😂 When their spouses/partners ask when their new kitchen cabinets will be done , they are told , “as soon as my new sliding table saw from germany or Austria arrives . “
I watched this video and then watched it again. Really well done so I bought the plans. The plans are as detailed and clear as the video. Great attention to details in describing the build. I cannot say enough good things about this project and its designer. I really appreciate the modest set of tools used. No $275 T squares here. My build of this is going very well so far! Thank you.
Последний раз так только Ларри Хона смотрел! Парень, дай Бог тебе здоровья и не останавливайся, двигайся дальше. Мы тебя смотрим из разных стран и просто получаем удовольствие. Хочется сделать не хуже, а даже лучше.
I just watched this entire workbench series without pause. This is undoubtedly one of the best engineered and executed workbenches ever. Elements of torsion box and butcher block with a cutting station and storage in one unit. Kudos to you sir. You have a new subscriber here!
Okay. I have just downloaded the plans for very little money. The plans are insane! It is in metric but also in imperial. It contains instructions, PDF plans, sketchup files, autocad files, printable templates and also photogallery!!! It all looks very, very, very ..... VERY CLEAN, proffesional and it is all on just another level. Such an amazing work!!! Can thank you enough for this job! Deffo not the last plan I have downloaded! Greetings from the Czech Republic
Plans suck in my opinion. I have cut everything on the cut sheet. And I still have to open autocad just to get some measurements for glue up. It should be mentioned in a step by step process. Its alot of fluff. Not happy with my purchase at all.
Like the flexibility in materials with your plan. An additive method to tenon and mortise vs cutting down using complex methods and tools. Brilliant plan.
For anyone interested in making this workbench; It is an amazing workbench! I have built mine to have a 4' x 8' 3/4 plywood top only with a circular saw and a handmade straight edge and it is extremely sturdy! I used 6" lockable swivel casters that can hold up to 500kg each, and I have put them to the test! I used the bench as a construction scaffold to insulate my garage's ceiling and it wasn't even feeling risky with only a single 3/4 inch 4' x 8' plywood sheet on top. Me and my uncle, we weigh over 250kg together and we were installing 3/4" plywood sheets on my ceiling, it also had a bunch of tools in the cabinets (I didn't make drawers or anything for now...) and it could've hold even more! There was 2 drill presses, a planer, 2 jointers (4" and 6"), a spare circular saw, a compressor, a portable dust collector and a pen-turning lathe in the cabinets! My only complaints are that I did NOT glue the cabinets to the main frame, because I didn't know if I would like the 4' x 8' footprint...and that I didn't add 2 more strips in between the workbench's top and the cabinet, it sags just a tiny bit because I am using only 1 sheet of 3/4" cheap plywood, I didn't want to use more than this to reduce the cost. SO, If you're thinking of only using a 3/4" plywood top, please do yourself a favor and add at least 1 strip of vertical plywood on top of each sides of the 2 cabinets to reinforce the top!
Overall it’s a decent table. If you’re not using it for big heavy projects. Its gets unstable when using my jigsaw and handsaw. Table starts to shake and lifts off the ground. Maybe I’m doing something wrong?Also the folding mechanic works great th-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh when setting up, but I can’t get the table to fold down. It gets stuck 3/4ths on the way down.
Great concept for the frame! Once more I am impressed by your accuracy. It‘s always a satisfying pleasure to see how all the parts go together and fit as expected. Thank you!
Love your videos. In the States we were fortunate to get Phear clamps at Rockler stores. They had the normal ones and Rockler blue ones. If I’m glueing up a joint that isn’t closing these are my secret weapon. I did some hobby timber framing last year with 4x4s and they really saved the day when closing the last millimeter in my joints.
Really like this work bench. I plan on building one like it with the addition of putting my table saw in it. I have the Delta 36-725 model and the caster set up is terrible. I also love the cross cut feature and edge cut feature you've built in. This bench build will eliminate the need for a separate table saw, separate expensive cross cut table, and bring my large cuts up off the floor. I want to also install a router in it. Thanks for a brilliant design!
@@Paoson_Woodworking May be a while yet. My next phase is to empty my garage, run all my electric, paint, coat the floor. Build work bench after. I've watched your 4 part build about 5 times now...trying to decide how to modify it to integrate my table saw and router.
You are so amazing that you make me wanna cry - of joy! I absolutely love your channel. I think you are a genius and a truly generous one that shares all these amazing things with us with such simplicity and humbleness. I am an eager follower. Thank you for everything! 💙
Я восхищён, просто бесподобно. Спасибо огромное за Ваше видео, Ваша работа настоящий шедевр, достойный только таких увлечённых, как Вы, людей!!!!!! Браво!!!!
Sin lugar a dudas,eres el carpintero màs inteligente del mundo,solo tu puedes tener una mente centrada para hacer una obra tan bella,te felicito.Luego de ver tu obra quede conmovido a tanta exactitud y belleza,luego quedè en depresiòn permanente,pero eres el top mundial,nadie puede superar lo tuyo,saludos.
A word to the wise with anyone who decides to follow these plans. Since they're designed to be doable by people without a lot of tools and likely experience . . . Getting your plywood pre cut at your local lumberyard is very contingent on how good their cutting service is. This is something you'll probably have to learn the hard way since you might go to a bigbox store and get hair-precise cuts (really depends on the store management and how much pride the floor staff take in keeping the panel saw tuned) or to a lumberyard and get a mess, or visa versa. I wound up using a lot of my own time re-straightening the lumber yard cuts. Luckily, I was skeptical of their precision before hand and sized everything a bit bigger for cleanup at home. But it still left me with a few defects that have haunted me through the project.
I am not sure if I will have time to build this, but I am buying the plans for the support. TH-cam should have donation button :) Such a great video! Thanks a lot for this!
AWESOME....I just came across your channel and man am I pumped! Right away saw some projects that are perfect for my shop. Your attention to detail and even more your creativity are most impressive. I'm looking forward to all you have to offer. Many thanks to you my friend. Peace.
The way the frame was designed for strong joints and easy assembly is a novelty. I am thinking of how to modify the design for a smaller 3x5 work bench
@@Paoson_Woodworking thanks, I saw your smaller work bench. I actually watched half of your videos in the past few weeks. So many creative designs. Isn't the 3 layers of ply to much for the frame? I am trying to keep it light given I have to push to my driveway while working.
So glad I found this channel and this plan! I have a slab of hard maple antique bowling alley for the top. It’s only 59” long so I am redesigning slightly.
Something tells me that woodworking is your hobby and that you are actually a highly trained assassin. The patience and precision you use to create this wonderful workbench are the same skills you use to execute targets. lol.. jk.. your videos are a pleasure to watch and helps lower my blood pressure. Enrique
Chapeau Maestro ! Una vez mas quedo impresionado por la calidad del proyecto y la realización. Impaciente de ver el siguiente ! Un saludo desde Burdeos
Very interesting design. I like the idea of using engineered wood (aka plywood) for it's stability and ease of use. I look forward to seeing the rest of the build.
This is a great design. I'd like to build something similar but with smaller cubes. I'd actually like to have the ability to separate each cube due to space constraints in my garage (a single cube might integrate a drill press, one a router table etc). You've given me some great ideas, and it'll be great to see how you integrate your machinery.
yes you could have drilled the holes at the floor drill before gluing the frame together BUT, that portable drilling platform is brilliant. In this instance far more efficient that a fixed floor drill because you can move it around your job. this drill platform would be great for people like me who have a very limited amount of work space.
Thank you for the great reference, a great and pleasant work to see and review. What material is used? marine plywood? It has more specifications because the color is very beautiful, very clear.
New to your channel, I am needing to build a 112 inch bench and I want a lot of drawers. Looking forward to attempting this. I will follow your videos to the letter
Boa tarde cara parabéns pelo seu projeto dessa bancada multifuncional é um excelente profissional me espiro nos seus projetos vou fazer uma bancada para mim seguindo suas ideias parabéns 👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿.
Deja las prensas ( que están buenísimas) y la mesa de trabajo ,lo que está muy bueno (todo) pero es una buena opción de hacer cajas y espigas con triplay o terciado o como le llamen en España,saludos y espero ver más videos y más seguido!
Sin duda será un excelente banco de trabajo, fuerte, versátil y muy práctico. Estaré pendiente del segundo video. Saludos y felicitaciones desde Zitácuaro Michoacán México
I am in the early stages of planning and budgeting the build of this project but am unable to find a material list in the plans that I purchased. Was hoping for an idea of how many sheets of plywood I would need with out trying going through every piece. Thank you for your help as always and again I am very impressed by your work and only hope mine will be half as well built.
I'm only a third of the way through this first vid and just wanted to say I love the construction technique ... no need to worry if your mortise and tenons are perfectly paired, you know they have to be if you used one to space the other ... brilliant. Only suggestion I would make is to screw the joints from the unseen side but maybe I haven't reached that part yet! :)
Buenas amigo Me encanta tu trabajo Se ve que le dedicas tiempo y amor y empeño este video que acaba de poner me llama mucho la atención deseo hacer Esa mesa de trabajo Habría alguna forma de que tú puedas traducirlo en español saludos desde Costa Rica
hola compañero, gracias por tus amables palabras. Puedes activar los subs del vídeo en Español. También tienes el artículo en Español aquí: www.paoson.com/es/blog/banco-de-carpintero-multitareas-n118
This is an outstanding Workbensh!! You've done agreat job on that. It'll take me quite a wile to afford it to bild, but i will. Thanks againe. succes with all Your new Projects, I'll folow you! Freddie.
Very nice design, and good use of the multi- ply joints (bridle joints?) for an extremely strong and stable structure. What brand of F style clamps are those? I like them a lot.
What a great workbench! The best I have seen on TH-cam. I will be rebuilding this one and have bought your plans. After I am very tall, the workbench should have a height of 100 cm. Do you have the plans also with a height of 100 cm? I dare not adjust the dimensions because all the cut optimoerungen not fit. Can you help me?
Great idea on using the play wood as the frame of the table instead of studs. I enjoy assembly part. Can you share a link where we can find the wheels you used for this table please. Will turn on the notification to check out your more of your videos, great work!
Multi-Function Workbench Plans: bit.ly/39eKtrr
The casters might support 1000kgs as a set but the fasteners won’t hold bc it’s screwed into the side edges of your plywood. It would have been better to use 2x4s or 4x4s for them.
I’m sure you know this but someone not familiar with wood working might not know this.
Very nice.
One observation about woodworkers in general is, that most spend an inordinate amount of time buying tools , building their shop, buying more tools , improving their shop, buying more tools , making their shop larger , buying more tools etc. etc. 😳😂
When their spouses/partners ask when their new kitchen cabinets will be done , they are told , “as soon as my new sliding table saw from germany or Austria arrives . “
Well yeah!
I watched this video and then watched it again. Really well done so I bought the plans. The plans are as detailed and clear as the video. Great attention to details in describing the build. I cannot say enough good things about this project and its designer. I really appreciate the modest set of tools used. No $275 T squares here. My build of this is going very well so far! Thank you.
The sliding drill press is haunting me. I must build me one. Outstanding work
Последний раз так только Ларри Хона смотрел! Парень, дай Бог тебе здоровья и не останавливайся, двигайся дальше. Мы тебя смотрим из разных стран и просто получаем удовольствие. Хочется сделать не хуже, а даже лучше.
I just watched this entire workbench series without pause. This is undoubtedly one of the best engineered and executed workbenches ever. Elements of torsion box and butcher block with a cutting station and storage in one unit. Kudos to you sir. You have a new subscriber here!
Okay. I have just downloaded the plans for very little money. The plans are insane! It is in metric but also in imperial. It contains instructions, PDF plans, sketchup files, autocad files, printable templates and also photogallery!!! It all looks very, very, very ..... VERY CLEAN, proffesional and it is all on just another level. Such an amazing work!!! Can thank you enough for this job! Deffo not the last plan I have downloaded! Greetings from the Czech Republic
thanks Radek! I'm happy to read this
@@Paoson_Woodworking No worries, you worked for it and the result is amazing! Thank you!
Plans suck in my opinion. I have cut everything on the cut sheet. And I still have to open autocad just to get some measurements for glue up. It should be mentioned in a step by step process. Its alot of fluff. Not happy with my purchase at all.
Like the flexibility in materials with your plan. An additive method to tenon and mortise vs cutting down using complex methods and tools. Brilliant plan.
thanks Robert!
best site I have found. Very clever and not boring!!!!
For anyone interested in making this workbench;
It is an amazing workbench!
I have built mine to have a 4' x 8' 3/4 plywood top only with a circular saw and a handmade straight edge and it is extremely sturdy!
I used 6" lockable swivel casters that can hold up to 500kg each, and I have put them to the test! I used the bench as a construction scaffold to insulate my garage's ceiling and it wasn't even feeling risky with only a single 3/4 inch 4' x 8' plywood sheet on top.
Me and my uncle, we weigh over 250kg together and we were installing 3/4" plywood sheets on my ceiling, it also had a bunch of tools in the cabinets (I didn't make drawers or anything for now...) and it could've hold even more!
There was 2 drill presses, a planer, 2 jointers (4" and 6"), a spare circular saw, a compressor, a portable dust collector and a pen-turning lathe in the cabinets!
My only complaints are that I did NOT glue the cabinets to the main frame, because I didn't know if I would like the 4' x 8' footprint...and that I didn't add 2 more strips in between the workbench's top and the cabinet, it sags just a tiny bit because I am using only 1 sheet of 3/4" cheap plywood, I didn't want to use more than this to reduce the cost.
SO, If you're thinking of only using a 3/4" plywood top, please do yourself a favor and add at least 1 strip of vertical plywood on top of each sides of the 2 cabinets to reinforce the top!
Overall it’s a decent table. If you’re not using it for big heavy projects. Its gets unstable when using my jigsaw and handsaw. Table starts to shake and lifts off the ground. Maybe I’m doing something wrong?Also the folding mechanic works great th-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh when setting up, but I can’t get the table to fold down. It gets stuck 3/4ths on the way down.
Great concept for the frame! Once more I am impressed by your accuracy. It‘s always a satisfying pleasure to see how all the parts go together and fit as expected. Thank you!
thank you!
Love your videos. In the States we were fortunate to get Phear clamps at Rockler stores. They had the normal ones and Rockler blue ones. If I’m glueing up a joint that isn’t closing these are my secret weapon. I did some hobby timber framing last year with 4x4s and they really saved the day when closing the last millimeter in my joints.
you're right, are great clamps! Thanks for comment
It’s great to see a quality tradesmen at work…..well done 👍
you are boss? No boss I'm sorry you are big boss I don't see all of my life very accurate man like you
Really like this work bench. I plan on building one like it with the addition of putting my table saw in it. I have the Delta 36-725 model and the caster set up is terrible. I also love the cross cut feature and edge cut feature you've built in. This bench build will eliminate the need for a separate table saw, separate expensive cross cut table, and bring my large cuts up off the floor. I want to also install a router in it. Thanks for a brilliant design!
thanks Daniel, I would like to see some photo!
@@Paoson_Woodworking May be a while yet. My next phase is to empty my garage, run all my electric, paint, coat the floor. Build work bench after. I've watched your 4 part build about 5 times now...trying to decide how to modify it to integrate my table saw and router.
You are so amazing that you make me wanna cry - of joy! I absolutely love your channel. I think you are a genius and a truly generous one that shares all these amazing things with us with such simplicity and humbleness. I am an eager follower. Thank you for everything! 💙
Я восхищён, просто бесподобно. Спасибо огромное за Ваше видео,
Ваша работа настоящий шедевр, достойный только таких увлечённых, как Вы, людей!!!!!! Браво!!!!
I was looking for a workbench that i can made for my woodworking class, now i sure that i found, thanks for share your knowlodge and great skills
Nice The last bench was like was like you a knock Down , I used point loading and torsion in my design 4 pieces and light weight
Sin lugar a dudas,eres el carpintero màs inteligente del mundo,solo tu puedes tener una mente centrada para hacer una obra tan bella,te felicito.Luego de ver tu obra quede conmovido a tanta exactitud y belleza,luego quedè en depresiòn permanente,pero eres el top mundial,nadie puede superar lo tuyo,saludos.
A word to the wise with anyone who decides to follow these plans. Since they're designed to be doable by people without a lot of tools and likely experience . . .
Getting your plywood pre cut at your local lumberyard is very contingent on how good their cutting service is. This is something you'll probably have to learn the hard way since you might go to a bigbox store and get hair-precise cuts (really depends on the store management and how much pride the floor staff take in keeping the panel saw tuned) or to a lumberyard and get a mess, or visa versa.
I wound up using a lot of my own time re-straightening the lumber yard cuts. Luckily, I was skeptical of their precision before hand and sized everything a bit bigger for cleanup at home. But it still left me with a few defects that have haunted me through the project.
I love the way you planned this and then used mainly good quality ply instead of planed lumber. Less expensive and easier to build. Subbed 👍
I am not sure if I will have time to build this, but I am buying the plans for the support. TH-cam should have donation button :) Such a great video! Thanks a lot for this!
thanks Radek!
Excellent design and your exicution was flawless. Great job on the accuracy of the fit.
Thanks!
Nice build bud. Great idea using plywood in ways no one else would've thought. Most would've used 2x4 or 2x6 to frame but u went beyond that.
It,s amaizing to look working people very profesional . 👏🏻👏🏻👏🏻👏🏻
AWESOME....I just came across your channel and man am I pumped! Right away saw some projects that are perfect for my shop. Your attention to detail and even more your creativity are most impressive. I'm looking forward to all you have to offer. Many thanks to you my friend. Peace.
The way the frame was designed for strong joints and easy assembly is a novelty. I am thinking of how to modify the design for a smaller 3x5 work bench
thanks! check this out:
th-cam.com/video/yA8bUKLI4Sc/w-d-xo.html&ab_channel=PaosonWoodWorking
@@Paoson_Woodworking thanks, I saw your smaller work bench. I actually watched half of your videos in the past few weeks. So many creative designs. Isn't the 3 layers of ply to much for the frame? I am trying to keep it light given I have to push to my driveway while working.
So glad I found this channel and this plan! I have a slab of hard maple antique bowling alley for the top. It’s only 59” long so I am redesigning slightly.
Beautiful,essential work .I love your "Piher" clamps,they 're masterpieces !!!
OMG! You're amazing! The attention to details and engineering are the best I've seen. Now I just need to be brave enough to try this project out!
Something tells me that woodworking is your hobby and that you are actually a highly trained assassin. The patience and precision you use to create this wonderful workbench are the same skills you use to execute targets. lol.. jk.. your videos are a pleasure to watch and helps lower my blood pressure.
Enrique
This is the most beautiful and efficient workbench I’ve ever seen. You are genius!
True tradesmen at work
If you'd like to help me, you can upload subtitles in your own language following this link:
th-cam.com/users/timedtext_video?ref=share&v=yTR9kg94z9A
Russian - DONE!
German Done!
@@reinholdpoier1791 thanks, that will be a great help!
Portuguese done! (muy buen canal, a ver si me animo y traduzco los tres vídeos restantes...)
Português, do Brasil!!!
This is indescribably good. Going to steal a lot of ideas for my existing bench!
Looking very good so far ( as usual). Very different Casters, I hope they live up to your expectations
Thanks!
Chapeau Maestro ! Una vez mas quedo impresionado por la calidad del proyecto y la realización. Impaciente de ver el siguiente ! Un saludo desde Burdeos
Gracias como siempre compañero
Very interesting design. I like the idea of using engineered wood (aka plywood) for it's stability and ease of use. I look forward to seeing the rest of the build.
Thanks as always!
that's going to be one rock solid bench...….very nice build!
Thanks Henry!
Great Project! I'm looking for Multifunktions-Werkbank Bau / Teil 2
Reliable will be the desktop. Waiting for the continuation.
thanks!
¡gran trabajo en hora buena te ha quedado muy bien!
great job now good time it has been very good!
This is a great design. I'd like to build something similar but with smaller cubes. I'd actually like to have the ability to separate each cube due to space constraints in my garage (a single cube might integrate a drill press, one a router table etc). You've given me some great ideas, and it'll be great to see how you integrate your machinery.
It is a good idea!
That is a great job on designing a modular workbench that includes built-in mortises and tenons with plywood.
Thanks mate!
Another incredible presentation in every way.
Good job and nice clamps you have..big like 👍
Woohooo, what a Monster-Workbench. Amazing!
thanks!
Excellent work!
Super cool project
thanks Pietro!
just ordered the wheels! I'll be watching this video a lot trying to make mine
send me some photos!
Very Nice Video 👍👍
yes you could have drilled the holes at the floor drill before gluing the frame together BUT, that portable drilling platform is brilliant. In this instance far more efficient that a fixed floor drill because you can move it around your job. this drill platform would be great for people like me who have a very limited amount of work space.
Nice Video 👍👍👍
Thank you for the great reference, a great and pleasant work to see and review.
What material is used? marine plywood? It has more specifications because the color is very beautiful, very clear.
www.paoson.com/blog/en/types-of-plywood-boards-for-woodworking/
Looking forward to part two. Thank you for sharing.
Your a very clever man. And strong, stong enough to wrestle Ox and win!
Шик. Блеск. Красота
Amazing job man!
Brilliant. I want to add your methods to my “Toolbox” thank you.
Thanks!
Awesome work bench and I love the design.
thanks
It's a nice looking work banch You got out there👍
This is my dream work bench.
Интересное решение изготовления верстака,новое для меня.Спасибо Антон за классное видео.Успехов!
Great Video!
thanks!
good workbench - heavyweight workbench! Plywood is perfect!
New to your channel, I am needing to build a 112 inch bench and I want a lot of drawers. Looking forward to attempting this. I will follow your videos to the letter
Молодец,отличная работа и супер верстак!👍
Cool casters!
Excelente trabajo, como siempre. Felicitaciones!!!
Gracias!
Boa tarde cara parabéns pelo seu projeto dessa bancada multifuncional é um excelente profissional me espiro nos seus projetos vou fazer uma bancada para mim seguindo suas ideias parabéns 👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿.
Felicitaciones excelente
Deja las prensas ( que están buenísimas) y la mesa de trabajo ,lo que está muy bueno (todo) pero es una buena opción de hacer cajas y espigas con triplay o terciado o como le llamen en España,saludos y espero ver más videos y más seguido!
Sin duda será un excelente banco de trabajo, fuerte, versátil y muy práctico. Estaré pendiente del segundo video. Saludos y felicitaciones desde Zitácuaro Michoacán México
I love this work bench, how many sheets of plywood did you use?
Excelente trabajo...saludos desde Cúcuta Colombia.🙋
Deseando ver la segunda parte. Un trabajo muy fino!!!
Gracias Alvaro!
Отличная работа!
This is a great system thank you very much I am getting ready to build another assembly table this will help me a lot!
off to a great start Suso! Thank you for sharing the video with us.👍😎JP
thanksª
Your very welcome Suso!😎
Danke für das Hochladen 👍 👍 👍
L ♥️ g
Pinta bien esa mesa. Da gusto verte trabajar. Me ha encantado esas patas-ruedas. Saludos
At around 3:00 you used some impressive looking clamps. Who makes them and what do they call them?
www.paoson.com/forum/viewtopic.php?f=22&t=273
I am in the early stages of planning and budgeting the build of this project but am unable to find a material list in the plans that I purchased. Was hoping for an idea of how many sheets of plywood I would need with out trying going through every piece. Thank you for your help as always and again I am very impressed by your work and only hope mine will be half as well built.
hello Richard, please write me by email: info@paoxxx.com
I'm only a third of the way through this first vid and just wanted to say I love the construction technique ... no need to worry if your mortise and tenons are perfectly paired, you know they have to be if you used one to space the other ... brilliant. Only suggestion I would make is to screw the joints from the unseen side but maybe I haven't reached that part yet! :)
Excelente!! Tenho a impressão que será uma mesa de trabalho bem resistente e durável.
Bonjours
Bravo Pour ton travail
Très bien
Est ce que on peut commander les plans en Français
Merci Encore
You mentioned where you got the laminated top for your bench. I can't find a link. BTW love this idea, Bench looks great watched it 5 times now.....
You did it again. Great video. I can't wait to part 2.
Buenas amigo Me encanta tu trabajo Se ve que le dedicas tiempo y amor y empeño este video que acaba de poner me llama mucho la atención deseo hacer Esa mesa de trabajo Habría alguna forma de que tú puedas traducirlo en español saludos desde Costa Rica
hola compañero, gracias por tus amables palabras. Puedes activar los subs del vídeo en Español. También tienes el artículo en Español aquí:
www.paoson.com/es/blog/banco-de-carpintero-multitareas-n118
Very interesting video. Thanks for sharing. What kind of clamps do you use? Where can they be found?
www.paoson.com/forum/viewtopic.php?f=22&t=273
This is an outstanding Workbensh!! You've done agreat job on that. It'll take me quite a wile to afford it to bild, but i will. Thanks againe. succes with all Your new Projects, I'll folow you! Freddie.
Very nice design, and good use of the multi- ply joints (bridle joints?) for an extremely strong and stable structure.
What brand of F style clamps are those? I like them a lot.
thanks! check this out:
www.paoson.com/forum/viewtopic.php?f=22&t=273
Un carpintero moderno y fino Felicidades
Another great design and video.
Immediate like :) This is pretty much my dream workbench.
What a great workbench! The best I have seen on TH-cam. I will be rebuilding this one and have bought your plans. After I am very tall, the workbench should have a height of 100 cm.
Do you have the plans also with a height of 100 cm? I dare not adjust the dimensions because all the cut optimoerungen not fit.
Can you help me?
nope, here an article where I explain how to modify the design: www.paoson.com/blog/en/bench-saw-and-boards-for-the-mobile-workbench/
Красота! Чем покрываете фанеру?
Great idea on using the play wood as the frame of the table instead of studs. I enjoy assembly part. Can you share a link where we can find the wheels you used for this table please. Will turn on the notification to check out your more of your videos, great work!
thanks!
www.paoson.com/forum/viewtopic.php?f=22&t=871