Thank you I love watching your videos. Just started down this road of painting lures. Wonderful that some of you share so much. I appreciate all of the work you have done.
I've heard that if you are getting air bubbles in the epoxy when brushing it on you can take a small butane torch and hold it 8 or so inches away from the bait and just sweep it back and forth across the lure. Should cause the air bubbles rise and pop. Awesome work by the way man, you have some serious talent.
Wow, really good work. Really good video. Very clear on instruction. I have not browsed through your other videos yet, but I was wanting to know do you have any tips for someone just starting out? The best places to get different styles of blanks and paints, rings, hooks. Really considering getting into this. There is not a whole lot of this going in in my area. If you have any input or other videos or knowledge and feel like sharing please do so!
Regarding blanks you can start looking at www.dingerbaits.com get the squarebill 2.5s to start painting since its the easiest. I've also gotten some blanks on Ebay as well. Keep watching videos on TH-cam and then experiment. If you screw up, you can wash the paint off the bait with warm water if you haven't clear coated yet. Don't give up and keep trying. I like Transparent paints because I like how the colors layer upon each other. If you want more info email me at mike@luremeincrankbaits.com
Great video. I have watched a few of your videos now. Intrested in starting to paint some lures. Where do you do get the devcon 2 ton epoxy and the glitter or fleck to put in the expoxy? Will keep looking for any new videos. Again great job.
I get the Devcon from Amazon.. Search around. to make sure you get a good price. Don't look on ebay! They will get ya for $20 for one... The fleck on believe I got on tacklewarehouse.com
+Lure Me In Custom Painted Crankbaits , can you make a basic video of painting a lure? Can I paint over other colors? How do I paint a silver spoon gold? How do I make it reflective, shiny, and last without repainting? Do you use anything like epoxy over the paint to make it last? Can I do it with just paint, No airbrushing?
Maybe just barely licking the surface of the epoxy coat with a small blow torch or zapping it with a heat gun would get rid of most of the surface bubbles.
+Lure Me In Custom Painted Crankbaits I've noticed ove the years that crappie have a light blue at the end of there tail. I think that would really make it realistic. pls reply
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Great video. Nice that you explained everything as you go. No dead air. Thx
This has been the best Crappie pattern I have seen so far awesome job I'm going to try it. Thanks for another great video.
AWESOME video. Simple yet great advice, for example: using a slightly damp sponge and dabbing off extra paint first.
Very simple to do yet a very authentic pattern. Excellent!
Its awesome to see someone sharing techniques helps us newbies!
Glad to do it!!
Excellent video Sir, very informative !, LOVE the idea of the sponge !
So simple this one is. Three colors!!! I just attempted this one and it has such depth to it. Many thanks.
Fantastic!! Email me pics of baits. Mike@luremeincrankbaits.com
Thank you I love watching your videos. Just started down this road of painting lures. Wonderful that some of you share so much. I appreciate all of the work you have done.
Connie Giacobbe For great tips and tricks and techniques visit my Facebook page Brotherhood of Custom Crankbait Painting
Learned a lot. Thanks
Great video! Love seeing how it's all done :)
Love it. Hope you don’t mind if I use some of your techniques.
Great vid! I've been trying to figure out how to do this without a stencil, thanks!
I've heard that if you are getting air bubbles in the epoxy when brushing it on you can take a small butane torch and hold it 8 or so inches away from the bait and just sweep it back and forth across the lure. Should cause the air bubbles rise and pop. Awesome work by the way man, you have some serious talent.
You can do that. I never have.. Just mix your epoxy slower and when brushing it on do long even strokes
Really like your videos. I’m particularly interested in the techniques, templates and tools you use. Wondering what airbrush you use? Cheers 👍
Outstanding!
Good looking bait what did cover the bill with ?
Great, job. We also paint and make the blanks.
Hey buddy love the videos if u don’t mind me asking where do u get the dcb and the deep cb crankbait bodies
Have you tried painting the Elegy Bone color.
Wow, really good work. Really good video. Very clear on instruction. I have not browsed through your other videos yet, but I was wanting to know do you have any tips for someone just starting out? The best places to get different styles of blanks and paints, rings, hooks. Really considering getting into this. There is not a whole lot of this going in in my area. If you have any input or other videos or knowledge and feel like sharing please do so!
Regarding blanks you can start looking at www.dingerbaits.com get the squarebill 2.5s to start painting since its the easiest. I've also gotten some blanks on Ebay as well. Keep watching videos on TH-cam and then experiment. If you screw up, you can wash the paint off the bait with warm water if you haven't clear coated yet. Don't give up and keep trying. I like Transparent paints because I like how the colors layer upon each other. If you want more info email me at mike@luremeincrankbaits.com
Awesome. Thank you!
you should have put a touch of pink around the bottom of the gills that makes the lures very effective
Great video. I have watched a few of your videos now. Intrested in starting to paint some lures. Where do you do get the devcon 2 ton epoxy and the glitter or fleck to put in the expoxy? Will keep looking for any new videos. Again great job.
I get the Devcon from Amazon.. Search around. to make sure you get a good price. Don't look on ebay! They will get ya for $20 for one... The fleck on believe I got on tacklewarehouse.com
Lure Me In Custom Painted Crankbaits I'll check them out. Thanks!
Great video very helpful thxs.
would like to ask where you get your airbrush paint from.
is the paint enamel or acrylic ?
ComArt airbrush paints by Iwata and Wicked paints by createx
Is that a kitchen wrap on the bill ?
I’m brand new to painting my own baits can you please tell me how many psi to use for base coat detail work scaling effect Ect
Which type of sponge you use for that effect? is it hand made and how,or is it sea sponge ?
great job guys
Stefan Sekularac artists sea sponge
Thanks for sharing your patterns! I was wondering what you wrap your bills in while painting? Thank you!
David Adkins blue painters tape
The tape looks clear. I was just wondering. Thanks!
David Adkins that one came wrapped from
The manufacturer that's why
Детский набор для творчества "Раскрась сам". :)))
How many air brushes do you use? Are you using the same brush just cleaning the brush between colors?
Hi Matt - I have one airbrush and I just clean the brush between colors. Its a simple process to clean the brush.
+Lure Me In Custom Painted Crankbaits , can you make a basic video of painting a lure? Can I paint over other colors? How do I paint a silver spoon gold? How do I make it reflective, shiny, and last without repainting? Do you use anything like epoxy over the paint to make it last? Can I do it with just paint, No airbrushing?
Why you don't spray the clear coat ?
The clear coat is DevCon's 2ton epoxy. Can't spray that.
Master.
where do you buy your blank lures
Www.dingerbaits.com. Www.predatorbassbaits.com. Www.dakotalakestackle.com
Maybe just barely licking the surface of the epoxy coat with a small blow torch or zapping it with a heat gun would get rid of most of the surface bubbles.
+urmominabox87 The clear coat does not have bubbles.. That is pearl fleck
+Lure Me In Custom Painted Crankbaits I've noticed ove the years that crappie have a light blue at the end of there tail. I think that would really make it realistic. pls reply
+Daniel Johns I'll have to look. Maybe it depends on the region because I haven't seen it in MN but thanks for the tip!
Lure Me In Custom Painted Crankbaits thanks!!
What's in ur clear coat
I mixed in opal glitter in the clear coat for added attraction lurepartsonline.com/Online-Store/Extra-Fine-Glitter/Extra-Fine-Glitter-1oz.html
Do u use water base paint
yes
what clear coat is that
IBeFish'n it’s mentioned at the 9:03 mark
Are these strike king 1.5?
J M no. It’s called a Deep CB
do you sell these?
All our baits are custom painted per customer order. Select a lure body then select the color pattern. Www.luremeincrankbaits.com
Good job add more detail doe.