My brother " Abhishek Vishwakarma " first thing thank you for your comment.......... 💐 Your sucess is my pleasure 💐 Thank you my brother & Have a nice day.
My brother "g s" first thing thank you for comment me. I have make a video ,,,Jo resistor reading galat bata raha tha aap mere channel me jakar bhi dekhsakte hain. Me aap ko har bo resistor ka list de rahoon aap use check kar lena . R 1 = 510 k Green Brown Yellow Gold. R 2 = 510 k Green Brown Yellow Gold. R 3 = 220 k Red Red Yellow Gold. R 4= 220 k Red Red Yellow Gold. R5 try 100 ohms Brown Black Brown Gold. R6 = 20 ohms Red Black Black Gold. R7 = 1 meg Brown Black Green Gold. R8=13 k Brown Orange Orange Gold. R9= 90 ohms Orange White Brown Gold. R 10= 100 k Brown Black Yellow Gold. R 11=1k Brown Black Red Gold. R 12=20k Red Black Orange Gold. R 13= 100 ohms Brown Black Brown Gold. R 14=100k Brown Black Yellow Gold. R 15= 100 meg higher value no need to replace it. R 16=1k Brown black Red Gold. R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold R 19=90k rare try 100 k Brown Black Brown Gold. R20=,352k rare try 350 k Orange Green Yellow Gold. R21=,548k rare try 550k green green yellow gold. R22= ,220 k Red Red Yellow Gold. R23= SAME R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold. Vr 1 absent look closely a resistor short in Vr1. Check D1 if it reverse current then it replace other wise leave it... All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic .... Thank you my my brother & have a nice day.
My brother " Ravi Kumar " first thing thak you for comment me . First resistor is 20 OHM which is responsible for bad readings. Second one is 1k for continous buzzer problem. Colour code 20 ohms = Red Black Black Gold. 1k = Brown Black Red Gold. Thank you my brother & Have a nice day.
I have dt830d DMM. R5 and R6 (510k and 100 ohams)are are not soldering due to reasons that both sides tracks are missing due to extra solder heat, let me know the your valuable advice how can I solder the registers on small remaining copper plates on device. Thanks in advance Mr. Nihar Dash.
My brother "Sham Phadnis" first thing thank you for comment me. If the track are missing you have to track it using pin ,,carefully all tracks are goes to the chip track it before the chip,,Carefully remove the colour coating & thin wire solder ,,,, the thin wire connect your big resistor .... Thank you my brother & Have a nice day.
I have one dt830d UNITY DMM. I have attached 9.10voltage battery, but multi meter lCD is not showing anything/blank.I checked current of battery and that is O. K., also all registers also checked that is O. K. Main I. C. Is good. Then I do not understand what is problems in DMM Please give me the solution in this matter. Thanks.
My brother "Sham Phadnis " check the conntecting carbon strip is well connected or not. Smd resistors are looks good but there are tolerence is too low so internally there burned .. If not working i will give all resistors with approptiate color code. Thank you my brother & have a nice day.
Thank you. I have checkedbattery strip connections, but still not solved the problem of showing anything in screen. Please give appropriate registers to b changed as you suggested. Thanks.
My brother "prakash bishi "first thimg thank you for coent me. Jo pehela bala resistor change kiya tha bo 22ohms ka hai. Color code Red Red Black Gold. Thank you my brother & Happy Durga Puja.
My dear friend "Akash Gunjal" I replace the R16 for the continuous buzzer on problem which you can see on my video ,I think that you should look your meter carefully with the help of magnifier glass is there any burned resistor or not whether a resistor is burned then you can tell me the serial number then I can give you appropriate value in big resistor with colour code.Ok if you're interested to change it ,,,,,The number is 1k resistor colour code is ,,,,,,,,BROWN BLACK RED GOLD.Thank you my friend ,Have a nice day.
Thanks for the prompt reply friend what I meant to say is that my multimeter is showing false reading and the resistor R6 which you replaced to solve that problem is not burnt so should I still replace it?
My dear friend ,Before suspect the main chip ic you have these things to do,,,, Test the battery amp using DC bulb,,,,,In my experience the smd are looks good but it damage because its micro size the tolerance capacity is thoo low it can be damaged easily.r7 to r2 is mainly responsible for bad reading or increase reading .The smd number note r7 and r2 is not resistor this is a serial no of resisistor the main number of the resistor written resistor top side like -r5 written 1000 to convert this code in smd it means it is a 100 ohms resistor.Just for practice replace these things to do when you are free at home.Happy VISHWAKARMA PUJA,,,,,,,,,,,,,
My brother "Akash Gunjal"The value of R6=20 Ohms colour ,Red Black,Black,Gold,,This resistor cause reading problem.Thank you my brother have a nice day.
sir mein neh same isi tarha ka new multi meter leya us mein bazar nhi lga how tu kia hum us mein purane multimeter se bazar nikal kar laga skty h? agar lag skta h tu kesy
My brother "Sajjad" first thing thank you to Coment me ,,,,,,,,,,,,,, Mere bahi ye jo buzzer hota hai iska Jo beach bala (+) aur Jo side bala hota hai woh (-) hota hai. Aap mere meter mein Jo buzzer laga hua hai aap ko ho bahu waisa hi apne meter mein lagana hai agar nahi hua to mujhe coment me jaroor batana. Thank you have a nice day.
My brother "Ahmad reza Hassani" first thing thank you for comment me,,,, My brother plese write in English. Although the problem is same ,,,, hear the two resistors with Color code. R6=20 Ohms color code - Red Black Black Gold.Bad reading. R16= 1K color code - Brown Black Red Gold.Buzzer problem. Any problem comment me. & Have a nice day.
My brother "Krishimanch Rajandra dube" First thing thank you for comment me.......... Dekhye mere bahi pehele aap mujhe bataye aap ka reading ka problem hai ya buzzer ka problem hai ........
I opened the back cover to replace battery. When reassembled ,and leads connected ,no reading. Again reopened for examination,i found one spring jutting out soldered to some element on base . What is this spring.Was any element attached to it which fell when Iopened back cover. Pl advise .i checked battery .it is good
how can i fix the problem the resistor loss the value from 1000 K ohm n drop to 15 K ohm when i measured it on board when I took off the resistor n measured it...the resistor is normal to the actual value i found some resistor with the same problem
Thank you my brother for comment me,,,,, R5=20 Ohms ,color code ,,,,,, Red Black Black Gold ,,,, Which is used for bad reading ,,,,,, Thank you my brother & Have a nice day.....
Hii Nihar , i used my multimeter to measure AC voltage when continuity mode was on,and hence it got damaged. Now it is showing continuosly increasing decreaing values, when i opened it two smd resistor were burnt R9 and R15.. Value of Smd Resistor R15 is 132 but Value of R9 is not clear, it has 4 numbers in which first is 9 and last is 0 but the two numbers inbetween are not clear..please tell me which resistor shoud be used...
My brother "Sachin Shrivastava"first thing thank you for comment me. My brother as your concern R15 is a serial 132 convert in general resistance it denotes 1.3k Brown Orange Red Gold. R9=3900 in 90% meter I have used. It's a 390 ohms Orange white brown gold. Don't be panic your meter is ok. Thank you for comment me have a nice day.
My brother "Sachin Shrivastava" thanks for replying me. Bhai jaisa ki R9 ke bare me aap bol rage thee . Bhai AAP agar Power supply me kam kiye honge to ye jaroor jante honge ki agar high voltage 230v ya AAP ka dc 12 voltage ho agar galat hua to ye kitni resistance capacitor ic Ko jala dalti hai,,,,, mera kehana ka ye matlab hai ki jaroori nahi ke jala hua smd harbakth AAP ko dikhaye de . To mere bahi har meter ka resistant thoda alag hota hai is liye mujhe AAP sare resistance ka number comment kijiye Me AAP ko colour code ke saath bhej doonga . Mera man na hai ki agar AAP ka display chal Raha hai to AAP ka meter bil kul thik hai. Thank you & have a nice day.
It is wise to take pictures of your newest instruments, so you can tell the SMD resistor values. You know schematics to Chinese meters are almost impossible to find nowadays...
My brother "Ali Khan" first thing thank you for comment me. Mere bahi Maine jitne bhi thin kiya hai Maine dekha hai ki ,,, Bad reading ke live R2 se Lekar R7 tak jimedar hain koi bat nahi me aapko ,,,,Resistor aur colour code ke sath de deta hoon aap dhoond ke lagana . R 2 = 510 k Green Brown Yellow Gold. R 3 = 220 k Red Red Yellow Gold. R 4= 220 k Red Red Yellow Gold. R5 try 100 ohms Brown Black Brown Gold. R6 = 20 ohms Jo Maine kiya tha bad reading ke live Red Black Black Gold. R7 = 1 meg Brown Black Green Gold. Thank you my brother & have a nice day.
@@kcdash9638 Thank you my brother? Main check kar lunga Agar ban gaya toh sahi hey nahi to phir aap se solution Le Loonga reply ke liye bahut bahut Shukriya allah Pak aap ko Kamyab kare bhai
My brother "Amritlal Sahu" first thing thank you for your comment. if you replase with smd then reduce 10k doesn't effect like 510k=500k mean 504 smd 10k 20k is considerable. Have a nice day.
I have a Fluke meter and I realized yesterday that the dc voltage reading displayed is twice the actual voltage being tested. What does that sound like?
My brother " Michael Turner " first thing Thank you for comment me. My brother twice value means a smd resistor or a smd ohms is short. My point of view is that if your meter is displaying anything your chip ic is ok but ,,,, the problem is smd resistor or ohms short. Mention your meter all smd resistor upper side small printed numbers serial wise one by one comment to me ,,,,,, then i will give you all smd resistor value with color code its easy thing to repair you by your own hand.
My brother " Jerry Nakoja " first thing thank you for comment me. What type of help done by me my brother.......... Please comment me ...........................................
Bhai mere miter me aadha digit kat gaya ye. Aadha aadha dikhta he or left side me bettery ka simbol aa gaya he. To kya karu? plz sikhav. Mene new bettery bhi dal diya he.
My brother "YATIN PARMAR" Ye jo aadha digit show kar raha hai mujhe lagta hai ke iska contact carbon rubber jo display se sata hua hai usme koi dikat hai ,,,pehele aap dekh lijiye aachitarah se jaisa laga hai waisa hi laga na hai.Agar nahi hua hai to mujhe coment kiji ye ga .Thank you my brother have a nice day
The r6 also damage on my meter that you can saw on my video,,,,The value is 20 ohms color code is -Red Black Black Gold.Thank you my brother ,,,,Have a nice day.
Thank you I have a device-dt 830d- I have a completely burned resistance written down 6RT1 I want worth to forgive and sorry if there is inconvenience Thanks again.
My friend "Varun Naharia" first thing thank you for comment me. Burning smd are 2 types complete burn or it burn but it's look new.To find the burner resistance value to to google type multimeter circuit choose which circuit looks like your circuit then trace the location which area your resistance burneed resistance number convert it to big resistor after that you will get the value. Thanks for watching my video & have a nice day.
My brother "Hitesh Meghwal"first thing thank you for comment me. R6 is responsible for bad readings. It is 20 ohms. Colour code ,Red black black gold. R16 is responsible for continuous buzzer. It is 1K. Colour code ,Brown Black Red Gold. Thank you my brother for comment me. & Have a nice day.
Nihar Bhai, mere multimeter me sirf continuity aur 200 ohm tk ka resistance check ho raha hai baaki ac/dc voltage, current, ya higher resistance check nhi ho rahe, minus ka sign bana aa raha h.. plz help kren...
Mere bahi "Sachin Shrivastava" aap mujhe sare resistance ka number uske upar Jo smd laga hua hai uska number de sakte hain to me aap ko color code ke sath de doonga . Is tarah se likhna R5=100.
Dekhiye ye mere bahi "Sachin Shrivastava" mere video mein first me sare resistance ko dikhaya par bo sare hi naye jaise lag rage hain par aap he dekha na kaise 1003 smd short dikha ra hai,,,,jab Maine ek bada resistance lagaya to WO sahi se kam karna shooro karega.Aap ise just ek practice ke tour pe le aur aap ko agar value pata hogi to aap aassani se iske jagah pe doosra resistance laga sakte hain.
Bhai mra b multimeter just like your Us ka problem ya ha k ma na galti ha DC current select kar k AC current chk kar lia tha ab wo reading rhk ni dy rha kia problem ha
My brother "Noman Tariq" bhai iska matlab aap ka chip ic ok hai ye sirf reading galat dikha raha hai to iska ek rsistor jaroor kharab hogaya hai ,,,,,,me aap ko resistor color code ke sath bhej raha hoon,,,,, R1=510K color code _ Green Brown Yellow Gold R2=890K color code _ Brown white yellow gold R3=290k color code _Red White Yellow gold R4=790k color code _ blue white yellow gold R5=100 ohms color code _ brown black brown gold R6=20 ohms color code-Red black black gold Isko try kar na aap problem jaroor hi thik ho jaye ga. Thank you my brother have a nice day
My brother " MANOJ DUBEY" First thing thank you for coment me Yes my brother you can use 2=10 ohms but in series pattern ... Thank you my brother & have a nice day.
Hellow my brother "Iqbal Ahmed" The r18 convert big resistor it is a 990 mega ohms it does not show any value this a big tolerance resistor like a plastic.color white white violet gold ,,,this resistor does not damage or burn ,,,,,coment me what is your meter problem.Thank you my brother I am waiting for your coment.
My brother "Salman" sorry fo delay there is Net problem, Aap R15 ki jagah 9k resistor laga sakte hain,,,iska colour code hai White Black Red Gold,,,Aur 9k nahi mila to 10k laga sakte hain iska color hai Brown Black Orange Gold,,Thank you my brother have a nice day .
My brother"Chetan Chetu" dekhiye mere bahi reading galat dikhane ke 3 bajaha hain ... Pehela to aap aapna batrey ko kisi bhi 12v bulb se connect karke dekhiye aap ki meter ki battery ki ampere thick hai ya nahi jaisa ki aap mere video me dekh chuke hain. Doosra karan hai ki probe connector ka karbon hona ya thick se connect nahi hua hoga. Teesra misuse jaise ki DC me set kar ke AC me ghoosa dena samil hain. Thank you for coment me have a nice day.
Look my dear friend the smd are thoo small the tolerance capacity is very low that's why you have to keen watch all the component like green traks cause fungus or burned smd resistor use magnifirler or HD photo then zoom all the components if any one is fault then coment me the number of that parts I am give you the appropriate value in big resistor with colour code.I know that you can easiley repair your multimeter with your own hand,Thank you have a nice day.
My brother '' Pande gaming'' first i have to thank you to coment me.Can you upload a photo of your multimeter PCB on youtube or one thing clear meter did not have speaker various types meter have types of buzzer which help to produce the the beep sound if your meter does not have buzzer then try to find the buz letter then solder it ,,If there is no option then coment me. Thank you for coment me have a nice day.
My brother "MANOJ DUBEY" First thing for coment me ... Specially R6 is responsible for bad reading .......... You can use R6=20 Ohms resistor color code ,,,, Red Black Black Gold ... Thank you my brother & have a nice day..........
Sir mera multimeter jab me Dc Amp section select kar ta hu or 200/20 m lekar jatei bina prox lagye reading increase hone lagla Konsa resistant replace karna he?????
My Dear friend ! Norberto Sousa,,,,,,Now a days these types of power switches you can easiey find in chinies toys or chinies electronics shop just take a photo of the switch and pin then go to shop and get it ,,,,,Recenteley I replaced exact this type of switch in a digital radio,It is not complicated to replace it just do with your soldering iron,,,,Thank you my friend have a nice day .
My brother " Ranjeet Kumar" first thing thank you for comment me. Mere bahi AAP R2 ke upar me jo choota saa number likha hua hai mujhe likh ke comment kijiyeega.
My brother "Berendra Kumar " koi bat nahi me aap ko sare resistors ke list de deta hoon . I can give appropriate value with color code please note. R 1 = 510 k Green Brown Yellow Gold. R 2 = 510 k Green Brown Yellow Gold. R 3 = 220 k Red Red Yellow Gold. R 4= 220 k Red Red Yellow Gold. R5 try 100 ohms Brown Black Brown Gold. R6= it means just short with a wire. R7 = 1 meg Brown Black Green Gold. R8=13 k Brown Orange Orange Gold. R9= 390 ohms Orange White Brown Gold. R 10= 100 k Brown Black Yellow Gold. R 11=1k Brown Black Red Gold. R 12=20k Red Black Orange Gold. R 13= 100 ohms Brown Black Brown Gold. R 14=100k Brown Black Yellow Gold. R 15= 100 meg higher value no need to replace it. R 16=1.3 k Brown Orange Red Gold. R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold R 19=90k rare try 100 k Brown Black Brown Gold. R20=,352k rare try 350 k Orange Green Yellow Gold. R21=,548k rare try 550k green green yellow gold. R22= ,220 k Red Red Yellow Gold. R23= SAME R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold. Vr 1 absent look closely a resistor short in Vr1. Check D1 if it reverse current then it replace other wise leave it... All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic .... Thank you my my brother & have a nice day.
Sir mujhase ek bhul ho gai jisase mera multimeter kharab ho gya resistivity mode pe rakhne ke bad ac bolt check karne se kharab ho gya please thik karne upay bataye
Thank you my brother ! "Iqbal Ahmed" thanks for your valuable support to me, Any kind of electronic issue you can coment me any time.Thank you & have a nice day.
My dear brother "Amrit Lal Sahu" ,Is your 510 is a small SMD resistor code ? Then i have to convert it into a big resistor it is a 51 OHMS resistor the Colour code of this resistor is (GREEN BROWN BLACK GOLD).Thank you my brother ,Have a nice day.
My brother "Shovan Chowdhury" First thank you for coment me R 15 hai 9001 covert in big resistor the value is"" 10k""" Color Code Brown Black Orange Gold Aap iski jagah 10k lagasaktey hain,,,, ,,,,,,,,,,,,,,,,Thank you my brother have a nice day,,,,,,,,,,,,,,,
Thank you my brother sarvesh Kumar ,Our channel has lots more realistic videos i hope you like it ,,,,,many many thanks bro for your affection and love.
सर मैं नया मल्टीमीटर लिया हूं लेकिन वह खराब है उसमें वैल्यू सही नहीं बताता और बीप का आवाज आता है मैं क्या करूं आप कृपया बताएं आपके जवाब का इंतजार रहेगा
My brother "Amit Gendle" first thank you for coment me,,,,,, Dekhiye value aur beep ka aabaz aana ye sanket hai ke aap ka koi do resistor short hain jaise ki aap mere video mein dekh sakte hain,,,,agar aap ka display thik hai to,,,,,,, Aap ko me pehele do resistor ka color code ke saath de Raha hoon aap ise thik us jagah lagana Jahan pe meine lagaya tha,,,,,,aagar nahi hua to me aur bhi resistor ke nam bataunga R6=20 Ohms - color code - Red Black Black gold R16=1k - color code - Brown Black Red Gold Thank you my brother have a nice day
My brother "ddhiman hr" first thing thank you for comment me . If DC voltage selection without touch ,,, I have dout that the multimeter rotor brass connector is broken or Check the inner ckt where the rotor spins.If problem then comment me. Thank you my brother & have a nice day.
Bro I have kusum 2700 multimeter, it's not work due to high voltage AC current, then it's AC VOLTAGE AND AMPER NOT Work zero showing, can u guide how can I repair it
My brother "Pankaj Satputa" can you upload your meter hd video on TH-cam,,,,,because I cannot see Kusum 2700 multimeter ,,,first I see the ckt video then I recommend you appropriate value of resistor ,,coment me which name you can upload this video on TH-cam.Thank you my brother have a nice day.
Sorry my brother ''Pankaj Satputa" I don't have any what'sapp or face book only I have this TH-cam that's why I told you to upload your video ,It's quite easy just mobile record and upload it then you give a tital name of your video ,my brother just do it it quite easer than what'sapp.Thank you my brother .I am waiting for your uploaded video,,,,,,,,,,,,,,,
Nihar bhai, mere paas same multimeter hai, ac current check karte waqt short hua meter ke andar and ab ye kaam nahi kar raha, maine meter khol kar dekha to R5, R6 and R16 short hai, meter on karne par main IC heat hota hai and display sahi se nahi aa raha, pls R5, R6 and R16 ka correct value bataye jise replace kar saku agar koi aur component bhi badalne ki jarurat hai to bataye, thanks.
My brother "jitendra kumar" dekhiye R5=100 ohms,R6=2 Ohms ,,,,Agar app ek analog meter se dekh rahe he to ye to OHMS hain ye do to short dikhaye ga,,,,,,lekin aagar aap ka koi bhi resistor ke upar me jo chote chote number likha hua hai ye hi uska value hai jaise ki mere meter me do resistor jal gaye tha uska number bhi nahi nazar nahi aa raha tha aagar aaisa hai to muje us resistor ka serial number jaise ki R15,,,R17 coment me batayega ,,,,,bojo chote chote number resitor pe likha hua hai usko convert kar na hai SMD convert in BIG resistor uske baad jo value me bataunga bo jaroor kam karega ,,,,,,main ic ke sath cheed chad nahi karna chaye ,,,,,Thank you my brother have a nice day.
@@kcdash9638 Bhai maine check kiya hai and R5, R6 and R16 short dikh rahe hai, unke number nahi dikh rahe, in sab ki jagah pe jo bade wale resistor lagenge unka value bata do. Thanks again
My brother "jitendra kumar"These are the values with color code,,,,, R5=100 ohms ,,color code=Brown Black Brown Gold R6=20 Ohms ,,color code=Red Black Black Gold R16=1k,,color code=Brown Black Red Gold. Thank you my brother for coment me have a nice day.
@@kcdash9638 Thanks bhai, Maine ek same model ke dusre Multimeter me check kiya to SMD resistor ke upar likhe number mil gaya, R5 1000, R6 9000, R16 132, apne jo values batati hai resistors ki wo inki jagah lag jayegi kya?
My brother " jitendra kumar " Now i have convert all these resistors in SMD form. R5=1000 convert in big resistors100 ohms Brown Black Brown Gold, R6=9000 convert in big resistors 900 ohms White Black Brown Gold,, R16=132 convert in big resistors 1.3 k Brown Orange Red Gold ,,,,,you can also try this .Thank you my brother for coment me.
My brother "Tarsem Singh" me toh pehele ic par dout nahi karta kyun ki ye Jo chote chote smd resistor hai ye sayad kharab ho sakte hain aapne bhi jaroor dekha yoga mere video mein.Pehele aap ko aapna meter ki ek video mobile we utha kar TH-cam pe apload karna hoga kyun ki ,,,,mere pass bhi do clamp meter hain lekin in chote chote smd resistor ka number alag alag hain isie liye me pehele aap me dwara upload kiya gaya video dekhunga dhayan rahe aap ko upload video ka naam mujhe coment me batana hoga take mujhe video dhoond he me koie takleeb nahi ho .l am waiting for your uploaded video,Thank you have a nice day.
My brother " Amir Ah " first thing thank you for comment me. My brother here the value with color code. R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold Thank you my brother & have a nice day.
My brother " Berendra Kumar " first thing thank you for comment me. Ky aap R9 ke upar ka chota sa number mujhe bata de to me aap ko resistor ke value with colour code ke sath de degunga.
My brother " Birendra Kumar " mera r9 ka value me bata raha hu jo ki lagvak aap ki tarah hoga . Upar likha hai 3900 = 390 Ohms. Colour code,,,,,Orange White Brown Gold.
My brother "Dhaval Jesadiya " first thing thank you for coment me. Mere bhai aadhi bata rahi hai ye kis tarah se aadhi hai ,,,,,,,,Kya aap ka display letters aadhi dikha rahi hai ,,,,,,,,,Ya voltage aadhi dikha rahi hai
Then ok my brother "Dhaval Jesadiya" Fitst you need to know R1 ,,,,,,,,,,,,R5 is responsible for bad readings,,,,, I give you value with color code R1=510K color code _ Green Brown Yellow Gold R2=890K color code _ Brown white yellow gold R3=290k color code _Red White Yellow gold R4=790k color code _ blue white yellow gold R5=100 ohms color code _ brown black brown gold Thank you for coment me have a nice day.
My brother "Ritanshu sharma"first thing thank you for comment me. Mera man na hai ki jab tak aap ka display chal raha hai matlab aap ka meter thik hai. Jab High voltage AC current 200 omhs me ghusa hoga ye zaroor aap ka smd resistor ko short kiya hoga ,,, to koi bat nahi aap ko me sare resistor ka value color code ke sath de deta hu. I give you whole resistor with color code . R 1 = 510 k Green Brown Yellow Gold. R 2 = 510 k Green Brown Yellow Gold. R 3 = 220 k Red Red Yellow Gold. R 4= 220 k Red Red Yellow Gold. R5 try 100 ohms Brown Black Brown Gold. R6= Red Black Black Gold. R7 = 1 meg Brown Black Green Gold. R8=13 k Brown Orange Orange Gold. R9= 390 ohms Orange White Brown Gold. R 10= 100 k Brown Black Yellow Gold. R 11=1k Brown Black Red Gold. R 12=20k Red Black Orange Gold. R 13= 100 ohms Brown Black Brown Gold. R 14=100k Brown Black Yellow Gold. R 15= 100 meg higher value no need to replace it. R 16=1K Brown Black Red Gold. R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold R 19=90k rare try 100 k Brown Black Brown Gold. R20=,352k rare try 350 k Orange Green Yellow Gold. R21=,548k rare try 550k green green yellow gold. R22= ,220 k Red Red Yellow Gold. R23= SAME R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold. Vr 1 absent look closely a resistor short in Vr1. Check D1 if it reverse current then it replace other wise leave it... All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic .... Thank you my my brother & have a nice day.
Hellow my friend first you tell me that your meter and my meter CKT is same or not then I give you solution why I am telling this to you China made various model of 830 D I can give you photo with proof so friend first you tell me or the CKT is same or not.I am waiting.........your......coment.
Yes My brother "Iqbal Ahmed " you know the wright thing the r5 also responsible for bad reading you are much more intelligent you do the wright thing 👍 please replace it wright now by 100 Ohms colour ,,,Brown Black Brown Gold,,,Thank you my brother and i hope that your meter is ok .
My brother " Mahdi Bayat" first thing thank you for comment me. My brother sometimes SMD resistor doesn't look burned but internally they are burned ,,,, I give you appropriate resistor with color code . ,,,,,That can responsible for bad readings. Please note. R 1 = 510 k Green Brown Yellow Gold. R 2 = 510 k Green Brown Yellow Gold. R 3 = 220 k Red Red Yellow Gold. R 4= 220 k Red Red Yellow Gold. R5 try 100 ohms Brown Black Brown Gold. R6= 20 ohms Red Black Black Gold. R7 = 1 meg Brown Black Green Gold. Thank you my brother & have a nice day.
Hello sir when you makeing video so please say with your mouth what you are going to show dont make silence videos how can people understand so please say with your mouth thanks
My dear brother "Iqbal Ahmed" my first advice to cheek the the battery using a bulb that you saw on my video,After that you should need to check the r2 to r7 resistor ,Please note my brother that r2 and r7 is not the value of the resistor the actual value of the resistor is like r7 is written on the 105 this convert into big resistor it is a 1 meg resistor colour is brown black green gold ,any kind of help you can coment me my brother,,,,,Let's hope your meter is ok .Thank you have a nice day my brother
R17=0086 jo hai 8 meg ka ye kabhi kharab nahi hota, R18=R99 jo 990 mega ohms ye kabhi kharab nahi hota kyun ki iska value hi bahut jayda hai.kharabi r2se r7 me hi hota hai.
Bhai isme resistance kitne number ke Dale Hain bataiye aur video par likh kar dijiye kitne ohm ka resistance hai bhai please Awara video banana jante ho aur video Banaya Hua registance batane ke sath thank you
My brother "YATIN PARMAR" dekho ye jo sab ho raha hai ye kebal chip ic ka thik se kam nahi karraha hai isi bajaha se ye battery ka symbol naya battery dalne par dikha rahai,,,,,, Ma to kabhi bhi har manne ko nahi bolunga kyun ki aap jitna practical karenge aap utna sekhenge ,,,,,, youtube par how to repair digital multimeter lcd hai,,,,aap ise dekhiyega bahut hi acha video hai ,,,,,,Ise dekh kar aap ko thik karne ki upay mil jaye ga. Hope that your meter will be all wright ,,,keep trying to best of your level.Thanks for your coment have a nice day.
My brother "Technical Shiv"first thing thank you for comment me. Don't worry when your display id ok your meter is allwright the problem one resistor short so remove that resistor your problem will be solve. I give you whole resistor with color code . R 1 = 510 k Green Brown Yellow Gold. R 2 = 510 k Green Brown Yellow Gold. R 3 = 220 k Red Red Yellow Gold. R 4= 220 k Red Red Yellow Gold. R5 try 100 ohms Brown Black Brown Gold. R6= Red Black Black Gold. R7 = 1 meg Brown Black Green Gold. R8=13 k Brown Orange Orange Gold. R9= 390 ohms Orange White Brown Gold. R 10= 100 k Brown Black Yellow Gold. R 11=1k Brown Black Red Gold. R 12=20k Red Black Orange Gold. R 13= 100 ohms Brown Black Brown Gold. R 14=100k Brown Black Yellow Gold. R 15= 100 meg higher value no need to replace it. R 16=1K Brown Black Red Gold. R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold R 19=90k rare try 100 k Brown Black Brown Gold. R20=,352k rare try 350 k Orange Green Yellow Gold. R21=,548k rare try 550k green green yellow gold. R22= ,220 k Red Red Yellow Gold. R23= SAME R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold. Vr 1 absent look closely a resistor short in Vr1. Check D1 if it reverse current then it replace other wise leave it... All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic .... Thank you my my brother & have a nice day.
Good information bro Thanks for sharing God bless you 🙏
Bhai u r awesome aapki wzh se mera multimeter theak ho gya thank u so much bhai
My brother " Abhishek Vishwakarma " first thing thank you for your comment..........
💐 Your sucess is my pleasure 💐
Thank you my brother
&
Have a nice day.
@@kcdash9638 also u have a nice day but today I am very happy
Your way of explaining is very nice we liked it very much
very nice teaching sir good Thinking
Hello brodher volts check kerty bakt mera metar resistant per thaa ess leya bho kherab ho gyea abbi resistance ka value sahi nahi batata oss meay alag seya value beta reha hey keya karoo please batana
My brother "g s" first thing thank you for comment me.
I have make a video ,,,Jo resistor reading galat bata raha tha aap mere channel me jakar bhi dekhsakte hain.
Me aap ko har bo resistor ka list de rahoon aap use check kar lena .
R 1 = 510 k Green Brown Yellow Gold.
R 2 = 510 k Green Brown Yellow Gold.
R 3 = 220 k Red Red Yellow Gold.
R 4= 220 k Red Red Yellow Gold.
R5 try 100 ohms Brown Black Brown Gold.
R6 = 20 ohms Red Black Black Gold.
R7 = 1 meg Brown Black Green Gold.
R8=13 k Brown Orange Orange Gold.
R9= 90 ohms Orange White Brown Gold.
R 10= 100 k Brown Black Yellow Gold.
R 11=1k Brown Black Red Gold.
R 12=20k Red Black Orange Gold.
R 13= 100 ohms Brown Black Brown Gold.
R 14=100k Brown Black Yellow Gold.
R 15= 100 meg higher value no need to replace it.
R 16=1k Brown black Red Gold.
R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold
R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold
R 19=90k rare try 100 k Brown Black Brown Gold.
R20=,352k rare try 350 k Orange Green Yellow Gold.
R21=,548k rare try 550k green green yellow gold.
R22= ,220 k Red Red Yellow Gold.
R23= SAME
R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold.
Vr 1 absent look closely a resistor short in Vr1.
Check D1 if it reverse current then it replace other wise leave it...
All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic ....
Thank you my my brother & have a nice day.
@@kcdash9638 thanks bro.
A banda kamm da, very nice very good shot
Thank you my brother "Sandhu Jattz"
for comment me.
Please keep watching more & more
And
Explore more & more
Thank you & have a nice day.
Very good
Is video men jo pehla resistance aapne badlaa hai... Use spasht kar dijiye ki kitne ohms ka hai??
My brother " Ravi Kumar " first thing thak you for comment me .
First resistor is 20 OHM which is responsible for bad readings.
Second one is 1k for continous buzzer problem.
Colour code
20 ohms = Red Black Black Gold.
1k = Brown Black Red Gold.
Thank you my brother
&
Have a nice day.
Thank you💯💯😍
thanks for video
I have dt830d DMM. R5 and R6 (510k and 100 ohams)are are not soldering due to reasons that both sides tracks are missing due to extra solder heat, let me know the your valuable advice how can I solder the registers on small remaining copper plates on device. Thanks in advance Mr. Nihar Dash.
My brother "Sham Phadnis" first thing thank you for comment me.
If the track are missing you have to track it using pin ,,carefully all tracks are goes to the chip track it before the chip,,Carefully remove the colour coating & thin wire solder ,,,, the thin wire connect your big resistor ....
Thank you my brother
&
Have a nice day.
I have one dt830d UNITY DMM. I have attached 9.10voltage battery, but multi meter lCD is not showing anything/blank.I checked current of battery and that is O. K., also all registers also checked that is O. K. Main I. C. Is good. Then I do not understand what is problems in DMM Please give me the solution in this matter. Thanks.
My brother "Sham Phadnis " check the conntecting carbon strip is well connected or not.
Smd resistors are looks good but there are tolerence is too low so internally there burned ..
If not working i will give all resistors with approptiate color code.
Thank you my brother & have a nice day.
Thank you. I have checkedbattery strip connections, but still not solved the problem of showing anything in screen. Please give appropriate registers to b changed as you suggested. Thanks.
0.1 condenser kaha connect karthe hi to c1 condenser and c3 condenser or r3 resistance please help and reply dear bro
AAP ne Jo pehela resistant replace kiaa Bo kitne ohms ka hai ? Please give me reply...... please
My brother "prakash bishi "first thimg thank you for coent me.
Jo pehela bala resistor change kiya tha bo 22ohms ka hai.
Color code Red Red Black Gold.
Thank you my brother & Happy Durga Puja.
I have the same model multimeter with same problem so will replacing R16 solve the problem?
My dear friend "Akash Gunjal" I replace the R16 for the continuous buzzer on problem which you can see on my video ,I think that you should look your meter carefully with the help of magnifier glass is there any burned resistor or not whether a resistor is burned then you can tell me the serial number then I can give you appropriate value in big resistor with colour code.Ok if you're interested to change it ,,,,,The number is 1k resistor colour code is ,,,,,,,,BROWN BLACK RED GOLD.Thank you my friend ,Have a nice day.
Thanks for the prompt reply friend what I meant to say is that my multimeter is showing false reading and the resistor R6 which you replaced to solve that problem is not burnt so should I still replace it?
My dear friend ,Before suspect the main chip ic you have these things to do,,,,
Test the battery amp using DC bulb,,,,,In my experience the smd are looks good but it damage because its micro size the tolerance capacity is thoo low it can be damaged easily.r7 to r2 is mainly responsible for bad reading or increase reading .The smd number note r7 and r2 is not resistor this is a serial no of resisistor the main number of the resistor written resistor top side like -r5 written 1000 to convert this code in smd it means it is a 100 ohms resistor.Just for practice replace these things to do when you are free at home.Happy VISHWAKARMA PUJA,,,,,,,,,,,,,
Tell me the value of R6 resistor that you replaced first?
My brother "Akash Gunjal"The value of R6=20 Ohms colour ,Red Black,Black,Gold,,This resistor cause reading problem.Thank you my brother
have a nice day.
sir mein neh same isi tarha ka new multi meter leya us mein bazar nhi lga how tu kia hum us mein purane multimeter se bazar nikal kar laga skty h? agar lag skta h tu kesy
My brother "Sajjad" first thing thank you to Coment me ,,,,,,,,,,,,,,
Mere bahi ye jo buzzer hota hai iska Jo beach bala (+) aur Jo side bala hota hai woh (-) hota hai.
Aap mere meter mein Jo buzzer laga hua hai aap ko ho bahu waisa hi apne meter mein lagana hai agar nahi hua to mujhe coment me jaroor batana.
Thank you have a nice day.
Esi maltimitar ka r18 ragistens jal jaye to ripare kare kese
آموزش به درد بخوری بود،ممنون
My brother "Ahmad reza Hassani" first thing thank you for comment me,,,, My brother plese write in English.
Although the problem is same ,,,, hear the two resistors with
Color code.
R6=20 Ohms color code - Red Black Black Gold.Bad reading.
R16= 1K color code - Brown Black Red Gold.Buzzer problem.
Any problem comment me.
&
Have a nice day.
Which type of gum or adhasive i can used to fix the silver paper on the display of the meter!!
Konsa material ya gum use kru chikane ke liye
Mera clam miter me yahi problem aya he to me yahi resistor use kar sakta hu kya
My brother "Krishimanch Rajandra dube" First thing thank you for comment me..........
Dekhye mere bahi pehele aap mujhe bataye aap ka reading ka problem hai ya buzzer ka problem hai ........
@@kcdash9638 buzzer me problem hai or mitre riding sahi nahi dikha raha hai
Kya huva hoga
Very good vibes thanks Sir ji so much Sir ji
Nice work Man!
Thank you my friend "Norberto Souza" & I can thought that your digital meter is ok like my meter.Thanks my friend,,,,,,,,,,,,
Sir manne d c voltag par a c voltag chak kar dya gali se or miter khrab ho gya kya kru mare halp kre sir ,🙏
Very Nice Bro
Thank you my brother "Shivam Kumar" for your pleasant comment..
Keep watching more & more & Explore more & more.
Thank you & Have a nice day.
my multitester still working, but the chacarter on the display is not clear. the color not black . what should I do?
I opened the back cover to replace battery.
When reassembled ,and leads connected ,no reading.
Again reopened for examination,i found one spring jutting out soldered to some element on base .
What is this spring.Was any element attached to it which fell when Iopened back cover.
Pl advise .i checked battery .it is good
how can i fix the problem
the resistor loss the value from 1000 K ohm n drop to 15 K ohm when i measured it on board
when I took off the resistor n measured it...the resistor is normal to the actual value
i found some resistor with the same problem
Bhai IC kr left side orange capacitor ke niche R5 me kitna value ka resistor hai?
Thank you my brother for comment me,,,,,
R5=20 Ohms ,color code ,,,,,, Red Black Black Gold ,,,,
Which is used for bad reading ,,,,,,
Thank you my brother & Have a nice day.....
@@kcdash9638 Thanku
300 ohm ka bhi laga sakte ho
R6 burned up..solution..??
Can we recalibrate this dt830 multimeter
Yes you can calibrate your multimeter with more accuracy by adding 200 ohms potentiometer in vr spot.Thank you and have a nice day
Hii Nihar , i used my multimeter to measure AC voltage when continuity mode was on,and hence it got damaged. Now it is showing continuosly increasing decreaing values, when i opened it two smd resistor were burnt R9 and R15.. Value of Smd Resistor R15 is 132 but Value of R9 is not clear, it has 4 numbers in which first is 9 and last is 0 but the two numbers inbetween are not clear..please tell me which resistor shoud be used...
My brother "Sachin Shrivastava"first thing thank you for comment me.
My brother as your concern
R15 is a serial 132 convert in general resistance it denotes
1.3k Brown Orange Red Gold.
R9=3900 in 90% meter I have used.
It's a 390 ohms
Orange white brown gold.
Don't be panic your meter is ok.
Thank you for comment me have a nice day.
@@kcdash9638 Thanxx Alot Brother....
Brother aapne jo bataya maine waisa hi kiya pr dono hi problm sahi nhi hui
My brother "Sachin Shrivastava" thanks for replying me.
Bhai jaisa ki R9 ke bare me aap bol rage thee .
Bhai AAP agar Power supply me kam kiye honge to ye jaroor jante honge ki agar high voltage 230v ya AAP ka dc 12 voltage ho agar galat hua to ye kitni resistance capacitor ic Ko jala dalti hai,,,,, mera kehana ka ye matlab hai ki jaroori nahi ke jala hua smd harbakth AAP ko dikhaye de .
To mere bahi har meter ka resistant thoda alag hota hai is liye mujhe AAP sare resistance ka number comment kijiye
Me AAP ko colour code ke saath bhej doonga .
Mera man na hai ki agar AAP ka display chal Raha hai to AAP ka meter bil kul thik hai.
Thank you & have a nice day.
Ok Brother i will send u all resistors values.. thnxx
Can I replace ic on the multimeter
It is wise to take pictures of your newest instruments, so you can tell the SMD resistor values. You know schematics to Chinese meters are almost impossible to find nowadays...
Can you say the value of R5 resistor please help me
Veer g, Jo continity ...... HFE de vichkaar aa option aa jo vinga ਟੇਡਾ ਅਾ ਓਹਦਾ ਕੀ ਕੰਮ ਅਾ
Yeh is main apne rezister kaun se Lagaye Hain
My brother "Ali Khan" first thing thank you for comment me.
Mere bahi Maine jitne bhi thin kiya hai Maine dekha hai ki ,,,
Bad reading ke live R2 se Lekar R7 tak jimedar hain koi bat nahi me aapko ,,,,Resistor aur colour code ke sath de deta hoon aap dhoond ke lagana .
R 2 = 510 k Green Brown Yellow Gold.
R 3 = 220 k Red Red Yellow Gold.
R 4= 220 k Red Red Yellow Gold.
R5 try 100 ohms Brown Black Brown Gold.
R6 = 20 ohms Jo Maine kiya tha bad reading ke live Red Black Black Gold.
R7 = 1 meg Brown Black Green Gold.
Thank you my brother & have a nice day.
@@kcdash9638 Thank you my brother? Main check kar lunga Agar ban gaya toh sahi hey nahi to phir aap se solution Le Loonga reply ke liye bahut bahut Shukriya allah Pak aap ko Kamyab kare bhai
Bhai and no 514 mean 510 k ohm iske jagah kya laga sakte hai
My brother "Amritlal Sahu" first thing thank you for your comment.
if you replase with smd then reduce 10k doesn't effect like 510k=500k mean 504 smd 10k 20k is considerable.
Have a nice day.
I have a Fluke meter and I realized yesterday that the dc voltage reading displayed is twice the actual voltage being tested. What does that sound like?
My brother " Michael Turner " first thing Thank you for comment me.
My brother twice value means a smd resistor or a smd ohms is short.
My point of view is that if your meter is displaying anything your chip ic is ok but ,,,, the problem is smd resistor or ohms short.
Mention your meter all smd resistor upper side small printed numbers serial wise one by one comment to me ,,,,,, then i will give you all smd resistor value with color code its easy thing to repair you by your own hand.
Nihar Dash thanks for your quick reply! I will open it up this evening after work and see if I can find the info you requested. Thanks again.
please my multimeter (DT9208A model) works improperly because I mixed up the rotary pins and I need your help .
My brother " Jerry Nakoja " first thing thank you for comment me.
What type of help done by me my brother..........
Please comment me ...........................................
Bhai mere miter me aadha digit kat gaya ye.
Aadha aadha dikhta he or left side me bettery ka simbol aa gaya he.
To kya karu? plz sikhav.
Mene new bettery bhi dal diya he.
My brother "YATIN PARMAR" Ye jo aadha digit show kar raha hai mujhe lagta hai ke iska contact carbon rubber jo display se sata hua hai usme koi dikat hai ,,,pehele aap dekh lijiye aachitarah se jaisa laga hai waisa hi laga na hai.Agar nahi hua hai to mujhe coment kiji ye ga .Thank you my brother have a nice day
R6 resistor is damaged. By which Resistor should it be replaced? Plz tell the value
The r6 also damage on my meter that you can saw on my video,,,,The value is 20 ohms color code is -Red Black Black Gold.Thank you my brother ,,,,Have a nice day.
@@kcdash9638 okk thanks
Thank you I have a device-dt 830d- I have a completely burned resistance written down 6RT1 I want worth to forgive and sorry if there is inconvenience Thanks again.
How did you find the burned resistor value ?
My friend "Varun Naharia" first thing thank you for comment me.
Burning smd are 2 types complete burn or it burn but it's look new.To find the burner resistance value to to google type multimeter circuit choose which circuit looks like your circuit then trace the location which area your resistance burneed resistance number convert it to big resistor after that you will get the value.
Thanks for watching my video & have a nice day.
R6 or R16 ke jagah kon sa rasistance legaye
My brother "Hitesh Meghwal"first thing thank you for comment me.
R6 is responsible for bad readings.
It is 20 ohms.
Colour code ,Red black black gold.
R16 is responsible for continuous buzzer.
It is 1K.
Colour code ,Brown Black Red Gold.
Thank you my brother for comment me.
&
Have a nice day.
R16 ke jaghe
My brother "Hitesh Meghwal" thank you again comment me.
R16 ke jagah pe aap 1k resistance Laga sakte hain.
Iska colour hai ,brown black Red gold.
Bhi R16 ka colour code to brown,black,orange hota h na
My brother "Hitesh Meghwal " R16 ka code
Brown Black Red Gold =1K
Nihar Bhai, mere multimeter me sirf continuity aur 200 ohm tk ka resistance check ho raha hai baaki ac/dc voltage, current, ya higher resistance check nhi ho rahe, minus ka sign bana aa raha h.. plz help kren...
Mere bahi "Sachin Shrivastava" aap mujhe sare resistance ka number uske upar Jo smd laga hua hai uska number de sakte hain to me aap ko color code ke sath de doonga .
Is tarah se likhna R5=100.
Lekin boss koi resistance kharab nhi dikh raha...
Dekhiye ye mere bahi "Sachin Shrivastava" mere video mein first me sare resistance ko dikhaya par bo sare hi naye jaise lag rage hain par aap he dekha na kaise 1003 smd short dikha ra hai,,,,jab Maine ek bada resistance lagaya to WO sahi se kam karna shooro karega.Aap ise just ek practice ke tour pe le aur aap ko agar value pata hogi to aap aassani se iske jagah pe doosra resistance laga sakte hain.
R6 main ktina ohm ka resister lagaya
Bhai mra b multimeter just like your
Us ka problem ya ha k ma na galti ha DC current select kar k AC current chk kar lia tha ab wo reading rhk ni dy rha kia problem ha
My brother "Noman Tariq" bhai iska matlab aap ka chip ic ok hai ye sirf reading galat dikha raha hai to iska ek rsistor jaroor kharab hogaya hai ,,,,,,me aap ko resistor color code ke sath bhej raha hoon,,,,,
R1=510K color code _ Green Brown Yellow Gold
R2=890K color code _ Brown white yellow gold
R3=290k color code _Red White Yellow gold
R4=790k color code _ blue white yellow gold
R5=100 ohms color code _ brown black brown gold
R6=20 ohms color code-Red black black gold
Isko try kar na aap problem jaroor hi thik ho jaye ga.
Thank you my brother have a nice day
@@kcdash9638 thanks
Thanks brodher
मुगे हो बोल नही सकते तो वीडियो कंयु बनाते हो
R6 ME 10-10 OHMS KA 2 RESISTER LAGA SAKTE HAI
My brother " MANOJ DUBEY" First thing thank you for coment me
Yes my brother you can use 2=10 ohms but in series pattern ...
Thank you my brother & have a nice day.
Well done brilliant boy
Thank you my brother "Saeed Rehman" for your valuable word's,,,,,,,, Have a nice day
Mere multimeter me to auto reading dikhate dikhate off ho ta hai aur fir se auto reading dikhata hai plz solution 🙏🙏🙏
sir melti meter ka R18 dead lag raha hai us ko koun sa rasistor dalo please send me answer
Hellow my brother "Iqbal Ahmed" The r18 convert big resistor it is a 990 mega ohms it does not show any value this a big tolerance resistor like a plastic.color white white violet gold ,,,this resistor does not damage or burn ,,,,,coment me what is your meter problem.Thank you my brother I am waiting for your coment.
agar sar rajitance 15 jal jaye to uski jagah kounsa rajitance lagayenge sar bata dijiye
My brother "Salman" sorry fo delay there is Net problem,
Aap R15 ki jagah 9k resistor laga sakte hain,,,iska colour code hai
White Black Red Gold,,,Aur 9k nahi mila to 10k laga sakte hain iska color hai Brown Black Orange Gold,,Thank you my brother have a nice day .
+Nihar Dash is ok sar
multimeter not reading dc voltages? how to repair it?
Muje multimeter ki ridings shi nhi dikha rhi us ka karan kya h muje btaeye Bhaiya
My brother"Chetan Chetu" dekhiye mere bahi reading galat dikhane ke 3 bajaha hain ...
Pehela to aap aapna batrey ko kisi bhi 12v bulb se connect karke dekhiye aap ki meter ki battery ki ampere thick hai ya nahi jaisa ki aap mere video me dekh chuke hain.
Doosra karan hai ki probe connector ka karbon hona ya thick se connect nahi hua hoga.
Teesra misuse jaise ki DC me set kar ke AC me ghoosa dena samil hain.
Thank you for coment me have a nice day.
good work
Thank you my brother " Rehan Ali "
&
Have a nice day.
My multimeter is just like yours it's gone haywire it's shows readings if though it's terminals not connected plz help
Look my dear friend the smd are thoo small the tolerance capacity is very low that's why you have to keen watch all the component like green traks cause fungus or burned smd resistor use magnifirler or HD photo then zoom all the components if any one is fault then coment me the number of that parts I am give you the appropriate value in big resistor with colour code.I know that you can easiley repair your multimeter with your own hand,Thank you have a nice day.
R16 pe kitna value Ka resistance lagega?
My brother you can useR16= 1k resistor color code ,,,,brown black red gold,,,,Laga sakte hain.
Thank you for comment me my brother & have a nice day.
I have the same multimeter but different model DT830B. I check inside and it doesn't have a speaker but the main board is the same as DT830D.
My brother '' Pande gaming'' first i have to thank you to coment me.Can you upload a photo of your multimeter PCB on youtube
or one thing clear meter did not have speaker various types meter have types of buzzer which help to produce the the beep sound if your meter does not have buzzer then try to find the buz
letter then solder it ,,If there is no option then coment me.
Thank you for coment me have a nice day.
Register value tell sir..I am tamilnadu
R6 me kon kon no. Ka resister lagega
My brother "MANOJ DUBEY" First thing for coment me ...
Specially R6 is responsible for bad reading ..........
You can use R6=20 Ohms resistor color code ,,,, Red Black Black Gold ...
Thank you my brother & have a nice day..........
@@kcdash9638 thank's sir ji
Sir mera multimeter jab me Dc Amp section select kar ta hu or 200/20 m lekar jatei bina prox lagye reading increase hone lagla
Konsa resistant replace karna he?????
Mine is OK! But I have one Multimeter Eda DT9205A with the power switch damaged. Any Help?
My Dear friend ! Norberto Sousa,,,,,,Now a days these types of power switches you can easiey find in chinies toys or chinies electronics shop just take a photo of the switch and pin then go to shop and get it ,,,,,Recenteley I replaced exact this type of switch in a digital radio,It is not complicated to replace it just do with your soldering iron,,,,Thank you my friend have a nice day .
Hello R2 ka value kya hoga DT830D multimeter ka
My brother " Ranjeet Kumar" first thing thank you for comment me.
Mere bahi AAP R2 ke upar me jo choota saa number likha hua hai mujhe likh ke comment kijiyeega.
maltimitar me R15 bhi kharab hogaya iska kya number h
My brother "Berendra Kumar " koi bat nahi me aap ko sare resistors ke list de deta hoon .
I can give appropriate value with color code please note.
R 1 = 510 k Green Brown Yellow Gold.
R 2 = 510 k Green Brown Yellow Gold.
R 3 = 220 k Red Red Yellow Gold.
R 4= 220 k Red Red Yellow Gold.
R5 try 100 ohms Brown Black Brown Gold.
R6= it means just short with a wire.
R7 = 1 meg Brown Black Green Gold.
R8=13 k Brown Orange Orange Gold.
R9= 390 ohms Orange White Brown Gold.
R 10= 100 k Brown Black Yellow Gold.
R 11=1k Brown Black Red Gold.
R 12=20k Red Black Orange Gold.
R 13= 100 ohms Brown Black Brown Gold.
R 14=100k Brown Black Yellow Gold.
R 15= 100 meg higher value no need to replace it.
R 16=1.3 k Brown Orange Red Gold.
R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold
R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold
R 19=90k rare try 100 k Brown Black Brown Gold.
R20=,352k rare try 350 k Orange Green Yellow Gold.
R21=,548k rare try 550k green green yellow gold.
R22= ,220 k Red Red Yellow Gold.
R23= SAME
R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold.
Vr 1 absent look closely a resistor short in Vr1.
Check D1 if it reverse current then it replace other wise leave it...
All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic ....
Thank you my my brother & have a nice day.
Sir mujhase ek bhul ho gai jisase mera multimeter kharab ho gya resistivity mode pe rakhne ke bad ac bolt check karne se kharab ho gya please thik karne upay bataye
Multimeter ko repair kaise kare mere multimeter me betteri chhapi aati hai ese kaise sahi kare ek vedio banao bhai
Sir display me -1 or kabhi kahbi kuch number dikha rha h or ic garm ho rhi plz rply sir
The board does not having any fuse ( no safety) .make a video that to install fuse and make it safe device
Multimeter Display show nahi kar raha & IC bhi garam ho raha hai? Any repairing solution?
Nice sir
Thank you my brother ! "Iqbal Ahmed" thanks for your valuable support to me,
Any kind of electronic issue you can coment me any time.Thank you & have a nice day.
sir mera 510k ka resistor khrab hai iske bdle konsa resister laga skte hai
My dear brother "Amrit Lal Sahu" ,Is your 510 is a small SMD resistor code ?
Then i have to convert it into a big resistor it is a 51 OHMS resistor the
Colour code of this resistor is (GREEN BROWN BLACK GOLD).Thank you my brother
,Have a nice day.
R15 k badle konsa lagau?
My brother "Shovan Chowdhury" First thank you for coment me
R 15 hai 9001 covert in big resistor the value is"" 10k"""
Color Code Brown Black Orange Gold
Aap iski jagah 10k lagasaktey hain,,,,
,,,,,,,,,,,,,,,,Thank you my brother have a nice day,,,,,,,,,,,,,,,
Good good Bhai
Thank you my brother sarvesh Kumar ,Our channel has lots more realistic videos i hope you like it ,,,,,many many thanks bro for your affection and love.
What is the value of r6 and r16 ?
Great
Thank you my brother " Shekhar Kushwaha "
&
Have a nice day.
सर मैं नया मल्टीमीटर लिया हूं लेकिन वह खराब है उसमें वैल्यू सही नहीं बताता और बीप का आवाज आता है मैं क्या करूं आप कृपया बताएं आपके जवाब का इंतजार रहेगा
My brother "Amit Gendle" first thank you for coment me,,,,,,
Dekhiye value aur beep ka aabaz aana ye sanket hai ke aap ka koi do resistor short hain jaise ki aap mere video mein dekh sakte hain,,,,agar aap ka display thik hai to,,,,,,,
Aap ko me pehele do resistor ka color code ke saath de Raha hoon aap ise thik us jagah lagana Jahan pe meine lagaya tha,,,,,,aagar nahi hua to me aur bhi resistor ke nam bataunga
R6=20 Ohms - color code - Red Black Black gold
R16=1k - color code - Brown Black Red Gold
Thank you my brother have a nice day
My multimeter select the dc voltage without tuch supply meter reading showing plz help me
My brother "ddhiman hr" first thing thank you for comment me .
If DC voltage selection without touch ,,, I have dout that the multimeter rotor brass connector is broken or Check the inner ckt where the rotor spins.If problem then comment me.
Thank you my brother & have a nice day.
@@kcdash9638 Sir my problem is standing
Bro I have kusum 2700 multimeter, it's not work due to high voltage AC current, then it's AC VOLTAGE AND AMPER NOT Work zero showing, can u guide how can I repair it
My brother "Pankaj Satputa" can you upload your meter hd video on TH-cam,,,,,because I cannot see Kusum 2700 multimeter ,,,first I see the ckt video then I recommend you appropriate value of resistor ,,coment me which name you can upload this video on TH-cam.Thank you my brother have a nice day.
Sorry my brother ''Pankaj Satputa" I don't have any what'sapp or face book only I have this TH-cam that's why I told you to upload your video ,It's quite easy just mobile record and upload it then you give a tital name of your video ,my brother just do it it quite easer than what'sapp.Thank you my brother .I am waiting for your uploaded video,,,,,,,,,,,,,,,
Ok tomorrow I capture then upload
Nihar bhai, mere paas same multimeter hai, ac current check karte waqt short hua meter ke andar and ab ye kaam nahi kar raha, maine meter khol kar dekha to R5, R6 and R16 short hai, meter on karne par main IC heat hota hai and display sahi se nahi aa raha, pls R5, R6 and R16 ka correct value bataye jise replace kar saku agar koi aur component bhi badalne ki jarurat hai to bataye, thanks.
My brother "jitendra kumar" dekhiye R5=100 ohms,R6=2 Ohms ,,,,Agar app ek analog meter se dekh rahe he to ye to OHMS hain ye do to short dikhaye ga,,,,,,lekin aagar aap ka koi bhi resistor ke upar me jo chote chote number likha hua hai ye hi uska value hai jaise ki mere meter me do resistor jal gaye tha uska number bhi nahi nazar nahi aa raha tha aagar aaisa hai to muje us resistor ka serial number jaise ki R15,,,R17 coment me batayega ,,,,,bojo chote chote number resitor pe likha hua hai usko convert kar na hai SMD convert in BIG resistor uske baad jo value me bataunga bo jaroor kam karega ,,,,,,main ic ke sath cheed chad nahi karna chaye ,,,,,Thank you my brother have a nice day.
@@kcdash9638 Bhai maine check kiya hai and R5, R6 and R16 short dikh rahe hai, unke number nahi dikh rahe, in sab ki jagah pe jo bade wale resistor lagenge unka value bata do. Thanks again
My brother "jitendra kumar"These are the values with color code,,,,,
R5=100 ohms ,,color code=Brown Black Brown Gold
R6=20 Ohms ,,color code=Red Black Black Gold
R16=1k,,color code=Brown Black Red Gold.
Thank you my brother for coment me have a nice day.
@@kcdash9638 Thanks bhai, Maine ek same model ke dusre Multimeter me check kiya to SMD resistor ke upar likhe number mil gaya, R5 1000, R6 9000, R16 132, apne jo values batati hai resistors ki wo inki jagah lag jayegi kya?
My brother " jitendra kumar " Now i have convert all these resistors in SMD form. R5=1000 convert in big resistors100 ohms
Brown Black Brown Gold, R6=9000 convert in big resistors
900 ohms White Black Brown Gold,,
R16=132 convert in big resistors 1.3 k Brown Orange Red Gold ,,,,,you can also try this .Thank you my brother for coment me.
Sir mere clamp meter ki main ic main current nahi AA RHA Kya kharab ho sakta h
My brother "Tarsem Singh" me toh pehele ic par dout nahi karta kyun ki ye Jo chote chote smd resistor hai ye sayad kharab ho sakte hain aapne bhi jaroor dekha yoga mere video mein.Pehele aap ko aapna meter ki ek video mobile we utha kar TH-cam pe apload karna hoga kyun ki ,,,,mere pass bhi do clamp meter hain lekin in chote chote smd resistor ka number alag alag hain isie liye me pehele aap me dwara upload kiya gaya video dekhunga dhayan rahe aap ko upload video ka naam mujhe coment me batana hoga take mujhe video dhoond he me koie takleeb nahi ho .l am waiting for your uploaded video,Thank you have a nice day.
koi plz batye ga R4 main kon si reseter lagy gi
nice and thanks
17 ..18 resistor kitne ohm ka hai
My brother " Amir Ah " first thing thank you for comment me.
My brother here the value with color code.
R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold
R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold
Thank you my brother & have a nice day.
Multimetar me R9 kharab ho gaya koun sa lagaga
My brother " Berendra Kumar " first thing thank you for comment me.
Ky aap R9 ke upar ka chota sa number mujhe bata de to me
aap ko resistor ke value with colour code ke sath de degunga.
black resistance hai par wo Jal Gayi Hai
My brother " Birendra Kumar " mera r9 ka value me bata raha hu jo ki lagvak aap ki tarah hoga .
Upar likha hai 3900 = 390 Ohms.
Colour code,,,,,Orange White Brown Gold.
Thanks u
dhanyavad
Continuity mode my meter also not reading any value nor buzzer. I will ck R16
Please tell R16,R17,R18 VALUE ???
Un pr kya code likha hai
Hello brother mera multimeter mein ac & dc voltage aadhi bata rahi hai kya problem hai please bataye????
My brother "Dhaval Jesadiya " first thing thank you for coment me.
Mere bhai aadhi bata rahi hai ye kis tarah se aadhi hai
,,,,,,,,Kya aap ka display letters aadhi dikha rahi hai
,,,,,,,,,Ya voltage aadhi dikha rahi hai
@@kcdash9638sirf ac & dc voltage
Then ok my brother "Dhaval Jesadiya"
Fitst you need to know R1 ,,,,,,,,,,,,R5 is responsible for bad readings,,,,, I give you value with color code
R1=510K color code _ Green Brown Yellow Gold
R2=890K color code _ Brown white yellow gold
R3=290k color code _Red White Yellow gold
R4=790k color code _ blue white yellow gold
R5=100 ohms color code _ brown black brown gold
Thank you for coment me have a nice day.
भाई मल्टीमीटर 200ohm resistance पर सेट थी और ac supply चेक कर ली। अब क्या करे?
My brother "Ritanshu sharma"first thing thank you for comment me.
Mera man na hai ki jab tak aap ka display chal raha hai matlab aap ka meter thik hai.
Jab High voltage AC current 200 omhs me ghusa hoga ye zaroor aap ka smd resistor ko short kiya hoga ,,, to koi bat nahi aap ko me sare resistor ka value color code ke sath de deta hu.
I give you whole resistor with color code .
R 1 = 510 k Green Brown Yellow Gold.
R 2 = 510 k Green Brown Yellow Gold.
R 3 = 220 k Red Red Yellow Gold.
R 4= 220 k Red Red Yellow Gold.
R5 try 100 ohms Brown Black Brown Gold.
R6= Red Black Black Gold.
R7 = 1 meg Brown Black Green Gold.
R8=13 k Brown Orange Orange Gold.
R9= 390 ohms Orange White Brown Gold.
R 10= 100 k Brown Black Yellow Gold.
R 11=1k Brown Black Red Gold.
R 12=20k Red Black Orange Gold.
R 13= 100 ohms Brown Black Brown Gold.
R 14=100k Brown Black Yellow Gold.
R 15= 100 meg higher value no need to replace it.
R 16=1K Brown Black Red Gold.
R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold
R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold
R 19=90k rare try 100 k Brown Black Brown Gold.
R20=,352k rare try 350 k Orange Green Yellow Gold.
R21=,548k rare try 550k green green yellow gold.
R22= ,220 k Red Red Yellow Gold.
R23= SAME
R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold.
Vr 1 absent look closely a resistor short in Vr1.
Check D1 if it reverse current then it replace other wise leave it...
All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic ....
Thank you my my brother & have a nice day.
In dt830 the potentiometer is not available
Tell me where to fix the 200 ohm potentiometer
Hellow my friend first you tell me that your meter and my meter CKT is same or not then I give you solution why I am telling this to you China made various model of 830 D I can give you photo with proof so friend first you tell me or the CKT is same or not.I am waiting.........your......coment.
sir R5 bhi damage dika raha hai is koun sa rasistor dalna chai.
Yes My brother "Iqbal Ahmed " you know the wright thing the r5 also responsible for bad reading you are much more intelligent you do the wright thing 👍 please replace it wright now by 100 Ohms colour ,,,Brown Black Brown Gold,,,Thank you my brother and i hope that your meter is ok .
thanks
my multimeter is showing higher voltage (shows a 1.5v battery 4.6 volts)
i didn't see any burned components
what should i do?
My brother " Mahdi Bayat" first thing thank you for comment me.
My brother sometimes SMD resistor doesn't look burned but internally they are burned ,,,, I give you appropriate resistor with color code .
,,,,,That can responsible for bad readings. Please note.
R 1 = 510 k Green Brown Yellow Gold.
R 2 = 510 k Green Brown Yellow Gold.
R 3 = 220 k Red Red Yellow Gold.
R 4= 220 k Red Red Yellow Gold.
R5 try 100 ohms Brown Black Brown Gold.
R6= 20 ohms Red Black Black Gold.
R7 = 1 meg Brown Black Green Gold.
Thank you my brother & have a nice day.
Hello sir when you makeing video so please say with your mouth what you are going to show dont make silence videos how can people understand so please say with your mouth thanks
On karne se IC hit ho raha hai kya problem hai
sir mera malti meter value redding jayada kam dikha raha hai koi tips batai jo thik ho sake.
My dear brother "Iqbal Ahmed" my first advice to cheek the the battery using a bulb that you saw on my video,After that you should need to check the r2 to r7 resistor ,Please note my brother that r2 and r7 is not the value of the resistor the actual value of the resistor is like r7 is written on the 105 this convert into big resistor it is a 1 meg resistor colour is brown black green gold ,any kind of help you can coment me my brother,,,,,Let's hope your meter is ok .Thank you have a nice day my brother
R18 or R17 resistance ka smd code batao bhai
R17=0086 jo hai 8 meg ka ye kabhi kharab nahi hota,
R18=R99 jo 990 mega ohms ye kabhi kharab nahi hota kyun ki iska value hi bahut jayda hai.kharabi r2se r7 me hi hota hai.
Bhai isme resistance kitne number ke Dale Hain bataiye aur video par likh kar dijiye kitne ohm ka resistance hai bhai please Awara video banana jante ho aur video Banaya Hua registance batane ke sath thank you
Thank you sir
Bhai charo or se ghuma ke dekh liya aadha digit ho sho kar raha he.
Or left side me bettery ka simbol kyo dikha raha hoga????
My brother "YATIN PARMAR" dekho ye jo sab ho raha hai ye kebal chip ic ka thik se kam nahi karraha hai isi bajaha se ye battery ka symbol naya battery dalne par dikha rahai,,,,,,
Ma to kabhi bhi har manne ko nahi bolunga kyun ki aap jitna practical karenge aap utna sekhenge ,,,,,, youtube par how to repair digital multimeter lcd hai,,,,aap ise dekhiyega bahut hi acha video hai ,,,,,,Ise dekh kar aap ko thik karne ki upay mil jaye ga.
Hope that your meter will be all wright ,,,keep trying to best of your level.Thanks for your coment have a nice day.
Sir multi meter galti se cuntinuti mode per ac me lag gaya sari reading galat ho gai
why do
My brother "Technical Shiv"first thing thank you for comment me.
Don't worry when your display id ok your meter is allwright the problem one resistor short so remove that resistor your problem will be solve.
I give you whole resistor with color code .
R 1 = 510 k Green Brown Yellow Gold.
R 2 = 510 k Green Brown Yellow Gold.
R 3 = 220 k Red Red Yellow Gold.
R 4= 220 k Red Red Yellow Gold.
R5 try 100 ohms Brown Black Brown Gold.
R6= Red Black Black Gold.
R7 = 1 meg Brown Black Green Gold.
R8=13 k Brown Orange Orange Gold.
R9= 390 ohms Orange White Brown Gold.
R 10= 100 k Brown Black Yellow Gold.
R 11=1k Brown Black Red Gold.
R 12=20k Red Black Orange Gold.
R 13= 100 ohms Brown Black Brown Gold.
R 14=100k Brown Black Yellow Gold.
R 15= 100 meg higher value no need to replace it.
R 16=1K Brown Black Red Gold.
R 17= 90 ohms Rare try 100 ohms,Brown Black Brown Gold
R 18= denotes90 ohms try 100 ohms,Brow Black Brown Gold
R 19=90k rare try 100 k Brown Black Brown Gold.
R20=,352k rare try 350 k Orange Green Yellow Gold.
R21=,548k rare try 550k green green yellow gold.
R22= ,220 k Red Red Yellow Gold.
R23= SAME
R9 denotes 9 ohms rare try 10 ohms Brown Black Black Gold.
Vr 1 absent look closely a resistor short in Vr1.
Check D1 if it reverse current then it replace other wise leave it...
All "C" type cyramic smd and it's value is not same that's why no need to replace it ,,,, if it is replace it can damage your chip ic ....
Thank you my my brother & have a nice day.