They are beautiful. Do you sell all the same price or do you have certain ones that you sell for one price and certain ones for another? How do you do the pricing?
I’m working on a video currently to show how I price my items and I will show my booth in the video to give you an idea of how I do it. These particular earrings I sell for 10 dollars but it really depends on many factors. Keep an eye out for the pricing video!
Hello- questions for you. I am repurposing parts of my Granny's wedding dress for all of her Granddaughters can have a piece. The under layer of her wedding dress is lace, and I thought it would be beautiful to make earrings like this with lace. Do you feel like this is A: is this possible with lace B: any tips with lace (just follow the same steps?
That’s a lovely idea! Fabric can be tricky. To get the best results I would seal the fabric before adding it to your resin project. I would use maybe a sealing spray or find a good fabric sealer first on each side. Let that dry completely and then add it to your project. It will keep the lace from discoloring and hopefully prevent air bubbles from coming out of the fabric and ruining your project. It might take a couple trial runs to get it right, so I would suggest cutting tiny pieces to practice with first. Or maybe even using a different lace to practice before using the precious fabric of her dress for the final project. That way you can see what sealant works best on lace. I hope this helps. Thank you for watching! ❤️
I have that happen sometimes too. :(. It usually happens when the bezel isn’t completely flush with the tape. For an extra step you could try putting hot glue around the outer edges before pouring resin in. That can help keep it in better.
I just began mine, but once I peel them off the tape it’s tacky on the bottom , and seems like resin is needed when I did add alit and left in uv for 3 min, can you help what am I doing wrong please ?
@@leehomestead3424 thank you I just saw that the tray I was using was not flat , May I ask where do you place your ir in what , and is it 3 minutes on each side ? Sorry with all these questions thanks in advance
Thank you for watching! ❤️ Here are the display cards I used in this video: 400 Pack Earring Cards - Earring Card Holder - Custom Earring Cards for Earring Display - Hanging Earrings - Bulk Earring Cards - 2 x 3.5 Inches - Brown (Pack of 400) a.co/d/dsLMYkE
I take the cost of my materials and the the time it takes to make them into consideration. I usually price these for 10.00 at the craft mall I sell in.
Thanks for watching! I used to have an Etsy shop, but I wasn’t getting enough sells to make the ad costs worth it. I now sell them at festivals and by custom request. In the future I may make my own website.
Here is the tape I use: Booshow Resin Tape for Epoxy Resin Molding, Silicone Adhesive Tape, 2 inch Wide 164 Feet Long Traceless Craft Tape for Making River Tables Hollow Frame Bezels Epoxy Resin Craft Pendant a.co/d/2FyMKVG
Thank you with all the helpful hints, your earrings are really pretty!
Thank you so much! ❤️
Great job!! I just ordered materials to get started. I do make jewelery but am venturing into resin!!!
That’s wonderful! I know you’ll do a great job! Good luck on your new adventure! ❤️
They turned out very pretty.
Thank you so much! 😊
Love all your UV Resin Videos👏🏻👏🏻👏🏻👏🏻❤️
Thank you so much! ❤️❤️❤️
These really are pretty!
Thanks for sharing.
@@patgivens1009 Thank you so much! ❤️
Just found your great channel! Thanks for going slow enough for newbies! Love all of your ideas! Thanks for sharing. New subscriber. 😊
Yay! I’m glad you’re here! Thank you for subscribing! ❤️
Gorgeous and beautifully done 😊
Thank you so much! ❤️
Wonderful tutorial! Thank You for sharing
Thank you! Thank you for watching! ❤️
So pretty!
@@Vsv1224 Thank you so much! ❤️
Lovely! Great tutorial 🎉
Thank you! ☺️
Very helpful thank you for sharing xo
@@mondwulfcreates Thank you for watching! ❤️
They are beautiful. Do you sell all the same price or do you have certain ones that you sell for one price and certain ones for another? How do you do the pricing?
I’m working on a video currently to show how I price my items and I will show my booth in the video to give you an idea of how I do it. These particular earrings I sell for 10 dollars but it really depends on many factors. Keep an eye out for the pricing video!
Lovely thank you ❤
Thank you for watching! ❤️
What's the tape or plastic under the earrings...can you do it without being UV resin
The tape is uv resin tape. You need it to keep the resin in the bezel. You can use regular resin for this too and wait overnight for it to cure.
Hello- questions for you. I am repurposing parts of my Granny's wedding dress for all of her Granddaughters can have a piece. The under layer of her wedding dress is lace, and I thought it would be beautiful to make earrings like this with lace. Do you feel like this is A: is this possible with lace B: any tips with lace (just follow the same steps?
That’s a lovely idea! Fabric can be tricky. To get the best results I would seal the fabric before adding it to your resin project. I would use maybe a sealing spray or find a good fabric sealer first on each side. Let that dry completely and then add it to your project. It will keep the lace from discoloring and hopefully prevent air bubbles from coming out of the fabric and ruining your project. It might take a couple trial runs to get it right, so I would suggest cutting tiny pieces to practice with first. Or maybe even using a different lace to practice before using the precious fabric of her dress for the final project. That way you can see what sealant works best on lace. I hope this helps. Thank you for watching! ❤️
My Resin leaked out of the Bezel from the back side..had to debur them with tool as it hardened with UV.any tips on how to avoid the leakage ?
I have that happen sometimes too. :(. It usually happens when the bezel isn’t completely flush with the tape. For an extra step you could try putting hot glue around the outer edges before pouring resin in. That can help keep it in better.
@@leehomestead3424 Thankyou so much for replying ..😇 Will try sealing with glue..Thanks for the nice vid!
How do you twist the earring and not break, I do that to mine and they break?
Thank you for watching! It may be the type of hooks you’re buying. But, I also do it very gently and not too far.
@@leehomestead3424 thank you will practice, I just bought the hooks from your link thanks so much 🥰
Do you resin the back of the earrings? Or the sides?
I make them just like I did in the video, with no more steps added.
I just began mine, but once I peel them off the tape it’s tacky on the bottom , and seems like resin is needed when I did add alit and left in uv for 3 min, can you help what am I doing wrong please ?
Once you take them off of the tape the backs will need the uv light on them and then clean them with rubbing alcohol and a q-tip.
@@leehomestead3424 thank you I just saw that the tray I was using was not flat , May I ask where do you place your ir in what , and is it 3 minutes on each side ? Sorry with all these questions thanks in advance
@@SandraGonzalez-kj9sc Where do I place what?
I do three minutes on front and 1-2 minutes on back.
@@leehomestead3424 your bezels, ?
@@SandraGonzalez-kj9sc I work on a flat desk with something underneath like a piece of paper to catch any resin.
How do you price your earrings?
I’m in the process of making a video and I will explain how and why I price things the way I do.
What do you have under them?
I’m not sure what you mean? Is it the display cards?
Hi do you have a link for those display cards, thanks I’m advance
Thank you for watching! ❤️
Here are the display cards I used in this video:
400 Pack Earring Cards - Earring Card Holder - Custom Earring Cards for Earring Display - Hanging Earrings - Bulk Earring Cards - 2 x 3.5 Inches - Brown (Pack of 400) a.co/d/dsLMYkE
How do you price your pendant?
I take the cost of my materials and the the time it takes to make them into consideration. I usually price these for 10.00 at the craft mall I sell in.
😅 Me and Molly Brown can do this,it was good to get a refresher course,
Ain't it Molly Brown,?
Yesum,' you can bleedat 🤠👍🌼
bonjour . es ce que vous avez une boutique ou un site ou vous vendez vos bijoux ?
Thanks for watching! I used to have an Etsy shop, but I wasn’t getting enough sells to make the ad costs worth it. I now sell them at festivals and by custom request. In the future I may make my own website.
@@leehomestead3424 ok ! le jour ou vous créer votre site je serais acheteuse .
Thank you so much! ❤️
What kind of tape?
Here is the tape I use: Booshow Resin Tape for Epoxy Resin Molding, Silicone Adhesive Tape, 2 inch Wide 164 Feet Long Traceless Craft Tape for Making River Tables Hollow Frame Bezels Epoxy Resin Craft Pendant a.co/d/2FyMKVG