ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2017
- Some issues I found with the Integy steering knuckles and how to maximize your steering throw.
Parts for the Team Associated B5M steering links:
ASC6263 - 2.06" turnbuckles
ASC91453 - HD ballcups
ASC91048 - 8mm ballstuds
ASC25612 - M3 locknuts
Check out more information and other updates at my blog:
razorrcblog.blogspot.com
Came across the TT and I could not ask for better or more informational videos on the truck! Now I am going through and watching each set up video you have on them. Looking into alternatives instead of building the Tekno ET410 and this definitely seems like a candidate!
Thanks again for taking the time to make the in depth videos and actually explaining what's going on with the truck!
Thanks for the tips! I've been following the discussion at URC.
Thanks for all the info bro! I have the 10sc, I love to find those steering knuckles!
Charles Pagan I eventually took off the knuckles and just boiled the plastic ones.
@@RazorRC I had to shims my diffs, I'm running 42/70 hobbstar 2200kv motor in it!! 4s 20 mins of insane power ! I check the temp on the diffs instead the motor!!!
Sounds crazy, but I'm not surprised the drivetrain can take it!
Hey bud, try using some dry graphite on the inside of the front knuckles where the pillow balls sit. That should help to loosen up the movement.
Where did you get those front hub carriers? I am racing the TT offroad and the hub carrier cracked. NEED those!
Could u send me a link on where can I get those tires
Can you adjust the chassis length
Does your servo rest up against the body?
What types are you using?
I mean tires.
That suspension is super sloppy... this truck is garbage.
@RazorRC - I really wanted to buy this truck... I love pivot ball suspension setups.. and I like the small size and the overkill drive train. But steering precision is what separates $200 kits from the $400 kits. Please let us know how the slop is with the stock "boiled" setup.. OR... just replace the entire ball stud and knuckle with a kyosho dbx buggy parts.. as long as hyper tt arms accepts the thread and diameter of the ball stud.. it should work.
You recently turned the Hyper into a basher... how has it held up? And more importantly how did the pivot ball hub hold up?