Cest nul, quelle perte de temps. Il existe bien dautres façon de faire ces coutures droites sans matériel polluant comme le styromousse, de plus votre titre est faux.
If you watch the video carefully, it doesn't get into the machine as it's used on the OUTSIDE not near where it would get shredded. You can also coat the styrofoam, with mod-podge which will prevent it from shredding. It's all logic... but only if you have any!
How come the polystyrene does not move while you are sewing ? How did you get the edges of the polystyrene so neat and "clean" so that there were no "crumbs" floating around".
They make specific tools to keep your fabric in place and they probably don’t cost any more than the price of the foam and you don’t have to go through all of the mess to get the same results.
If you want the fabric to stay aligned, this trick isn't working. What samples you show are poorly aligned & shift even in the small sample used--if this trick is meant to help with alignment, it's not working! (Also this looked better when pins were inserted into corrugated cardboard as shown on another channel).
@@Aeronwen813 No, the blade did not break in the video but that was a box cutter being used. Those blades are designed to snap off when the blade gets dull and only a portion of the entire length is to be used, not the entire section as seen in this video.
Good thing there wasn't any talking. I had to MUTE the "music" to get rid of that. There is no reason to risk styrofoam crumbs in the machine. Bad music. Bad sewing trick. Don't do that.
Me encanta esa máquina de coser lástima que acá donde yo vivo aún no ha llegado ese modelo. Yo tengo el pie prensatelas que hace eso con los elásticos tal cual. Un abrazo desde Argentina 🇦🇷💕😘
One can also place a finger at the back of the foot to make the same gathers. There is no need to spend money on a ball of foam or potentially cut your finger when slicing it. I would not do it.
Just came across your video 😊 this is like a seen guide don’t you think 🤔 and I was wondering a couple of things 🤔 1st do you need a certain size ball or will any size do? 2nd how did you get the ball edges so smooth? what did you use please? and 3rd what if you want to make the seam closer to the edge of the fabric? I would be very happy if you could answer my questions 😁 oh I’ve also subscribed 😁 thanks for sharing this with us 👍🏻 from Bev in the UK 🇬🇧 xx
This is a great idea. I helps keep the fabric set measured away from the needle where you can guide it. Also, might I add that if you coat the foam with mod-podge, it will help keep it in place, and from shedding. For those who are objecting to this idea, get over yourselves. Did YOU come up with it? No. that's the only reason you're objecting.
Купите лапку для пришивания резинки, и выкиньте свой пенопласт.
Ерунда полная а для новичков в шитье вообще гиморрой полный
Et ensuite on fait comment avec tous les morceaux de polystyrène collés un peu partout ?
Mauvaise idée !
Non, il reste bien rangé et ne gêne même pas
@@JasmineHome1come l hai fatto liscio il polistirolo
Your title is false...you did not insert Styrofoam inside your machine!
Thank you for your comment! I suggest you watch my video again! I'm sure you'll find everything you couldn't find now!
Cest nul, quelle perte de temps. Il existe bien dautres façon de faire ces coutures droites sans matériel polluant comme le styromousse, de plus votre titre est faux.
That's your comment, really? Were you just looking for something you could nit pick?
No way I am using polstyrene foam near my Sewing Machine. Who wants that kind of mess getting into their machine?
If you watch the video carefully, it doesn't get into the machine as it's used on the OUTSIDE not near where it would get shredded. You can also coat the styrofoam, with mod-podge which will prevent it from shredding. It's all logic... but only if you have any!
Not to bad of an idea. I honest would use a clear tape around the Styrofoam to avoid crumbs.
Annoying music. Just speak!
Thank you for your comment! I will take your comments into account!
Seems like a waste of time.
How come the polystyrene does not move while you are sewing ?
How did you get the edges of the polystyrene so neat and "clean" so that there were no "crumbs" floating around".
I put together thick foam plastic specially, with small parts attached) But it doesn’t move because the tape is holding it in place
I can clearly see clear toe holding the styrofoam down. You could also face the front with clear tape.
They make specific tools to keep your fabric in place and they probably don’t cost any more than the price of the foam and you don’t have to go through all of the mess to get the same results.
Great ideas!
Thank you.
❤
If you want the fabric to stay aligned, this trick isn't working. What samples you show are poorly aligned & shift even in the small sample used--if this trick is meant to help with alignment, it's not working! (Also this looked better when pins were inserted into corrugated cardboard as shown on another channel).
Thank you for your comment! I will definitely take your wishes into account!
You're too slow.
Hate styrofoam...messy
☺️
Hacking up a piece of styrofoam with a blade that breaks apart is a bit scary. Be careful what you advise others to do.
Did the blade break or just the polystyrene.? It the blade didn't seem to break when I rewound and watched a second time.
@@Aeronwen813
No, the blade did not break in the video but that was a box cutter being used. Those blades are designed to snap off when the blade gets dull and only a portion of the entire length is to be used, not the entire section as seen in this video.
@@Aeronwen813 Don't run with scissors either!
If you can't be positive ...just scroll. No one is forcing you to try these tips.
Good thing there wasn't any talking. I had to MUTE the "music" to get rid of that. There is no reason to risk styrofoam crumbs in the machine. Bad music. Bad sewing trick. Don't do that.
As a matter of fact, I thing this idea is great. Sewing tools are expensive. She has just created something useful and practical. 😊😊😊
Идея , в целом хорошая, но применить нужно другой материал, но только не пенопласт!
Dumb waste of a post
ЗАМЕЧАТЕЛЬНО! ПРЕКРАСНАЯ ИДЕЯ. БРАВО! А ЧТО ДЕРЖИТ ЭТУ СИНТЕТИЧЕСКУЮ ДЕТАЛЬ С БУЛАВКАМИ...? ПОЧЕМУ ОНА НЕ ДВИГАЕТСЯ?
двухсторонний скотч
Бедная машинка, как потом отодрать и оттереть
Chevere esta técnica, ay que colocarla para mejor trabajo
Mil gracias por compartir ❤❤❤❤
¡Me alegro mucho que te haya gustado! También me di cuenta de que era conveniente e interesante.
Me encanta esa máquina de coser lástima que acá donde yo vivo aún no ha llegado ese modelo. Yo tengo el pie prensatelas que hace eso con los elásticos tal cual. Un abrazo desde Argentina 🇦🇷💕😘
😊😊
One can also place a finger at the back of the foot to make the same gathers. There is no need to spend money on a ball of foam or potentially cut your finger when slicing it. I would not do it.
Just came across your video 😊 this is like a seen guide don’t you think 🤔 and I was wondering a couple of things 🤔 1st do you need a certain size ball or will any size do? 2nd how did you get the ball edges so smooth? what did you use please? and 3rd what if you want to make the seam closer to the edge of the fabric? I would be very happy if you could answer my questions 😁 oh I’ve also subscribed 😁 thanks for sharing this with us 👍🏻 from Bev in the UK 🇬🇧 xx
wow! gamechanger for sure!
Thank you for your reply! I look forward to seeing you again on my channel!❤️
ta maszyna dobrej marki , a chodzi jak stary nie oliwiony grat !
Dziękuję za Twój komentarz! Wezmę Twoje uwagi pod uwagę!
@@JasmineHome1 Sorry ,ale szkoda mi tej maszyny .Mam dobry zbiór maszyn ,ale są konserwowane i pracują cichutko .Pozdrawiam
This is a great idea. I helps keep the fabric set measured away from the needle where you can guide it. Also, might I add that if you coat the foam with mod-podge, it will help keep it in place, and from shedding.
For those who are objecting to this idea, get over yourselves. Did YOU come up with it? No. that's the only reason you're objecting.
Who wants to go through all that just to sew elastic to a piece of fabric.
Here are a few ideas for what you can use foam for )
ME. I happen to appreciate the logic in this! but apparently some of you don't even know what that is.
I watched this???😳😳😳😳😳
Как сделать сборку на тканти
Умелые ручки, браво!!!
❤️☺️
Não sei o que aconteceu
como entender? você não gostou da ideia?
O ponto não está bom.
Can't you talk??
Why should I talk? I'm just showing you how to do it)
Niente male per arricciatura con elastico, ma così facendo, è ben distribuita? Grazie Jasmine!! 👏🏼👏🏼👏🏼👏🏼👏🏼❤️
The idea seems practical but I would feel happier if the styrofoam shape were to be covered to prevent bits coming away into the sewing machine.🤗🦘🦘🦘