#171
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- [Builder's view]HASEGAWA YAMAHA'89YZR500 LUCKY STRIKE is in progress.
Glue the exhaust chamber, then the inside of the frame. Since the swing arm has a lightening hole inside, cut a plastic plate, cover the hole, and fill it with polyester putty.
The chain tensioner part at the end of the swing arm is dug with a chisel and the details are improved with a hexagon nut made by cutting metal wire and aluminum.
Notice: I made some goods. Sold at SUZURI.
suzuri.jp/nand...
The photos of the finished product are summarized here plamodel.info
Please follow me on Twitter.
/ nandemo_seisaku
Various photos are published irregularly on Instagram.
Instagram / nandemo_plamo
Facebook page / nandemoseisaku
Web site nandemo-seisak...
Contact info@nandemo-seisaku.com
It seems that you had to do a lot of work to make the parts fit well and to make the model stronger. As always, beautiful artistic work. Thank you.
Thank you!!😀
安易にディテールアップパーツを使わず、加工や工作で情報量を増やしていくスタイル
いいですね👍
ありがとうございます😀
ディテールアップパーツを使うこともよくありますが、基本高価なんですよね。
だから手作り出来るバーツは手作りで済ませたいです。
So much attention to details! Cannot wait to see this thing painted and built!
Thanks😀
Des modifications minutieuses qui font de vos maquettes des modèles uniques au monde !
Bravo et merci pour le partage de votre passion.
Merci!😀
Three videos in a week?! What has two thumbs and likes it? This guy. Great work as usual. 👍👍
Thanks!!😀
お疲れ様です。
バイク模型は40年近く前には良く作っていました。
…が、基本的に4スト車ばかりで2ストで作ったのは自分が乗っていたRZくらいでしたね。
何が面倒だったかというと、チャンバーの組立と塗装です。
貼り合わせだと隙間だらけ、一体整形だと肉抜き埋めとヒケ地獄でウンザリしますし、模型的にはインライン4の集合管が絶対カッコいいと思っていたので…
それに当時は今のように安価にエアブラシセットが入手出来ませんでした。
ハンドピースもオリンポスのピースコンとかしかまだなくて、コンプレッサーなんて高くて高校生の自分には買えなかったです。
チャンバーって異径のパイプを溶接して作るぢゃないですか。あの溶接ラインの焼け再現が筆や缶スプレーでは不可能と思っていたので、手が出せなかったというのもありますね。
サードパーティのパーツも当時の自分からしたら高い物でしたし…
鋼管フレームのバイクキットしか作ったことがないので、アルミのボックスフレームやスイングアームは新鮮ですね。
肉抜き穴を丁寧に埋められて、テンショナーもディテールアップされて、どんどん解像度が上がってくると動画を見ている自分のテンションも上がります。
配信ありがとうございました。次回も楽しみにしております。
お疲れさまです。40年前っつーと…だいぶ前ですね😅😀
2ストのチャンバーは特徴的ですが確かに面倒なところもありますね。
塗装が見せ所になりますので楽しいですよ。面倒なら黒一色でもそれはそれでカッコイイです。
ハンドピースはオリンポスしか選択肢がなかったような感じでしたね。今はたくさんいろんなタイプがあって迷ってしまいますね。
Amazing video man, thanks for sharing
Thank you👍
スイングアームへの拘りが尋常じゃない…!
ここ、結構目立つところで…😀
こんばんわ~♪ 2ストバイクの象徴のチャンバー。やっぱ、いいですね~♪
こんばんは。ありがとうございます😀👍
Sugestão: construir o tensor da corrente em metal. Parabéns pela construção.
Tudo bem, mas vou tentar de várias maneiras😀
The swing arm certainly needed a lot of work to get it looking like the real thing. I think Hasegawa could have done a little better by making each half of the arm out of two parts glued together.
It can't be helped because it's hard for manufacturers to devise😅😀
チェーンテンショナーの細かな情報量の追加は、完成度をすごく高めてくれそうですね。
YZRやFZRのスイングアームは、見るからにゴツくて個人的に好みです^^
ありがとうございます、レーサーのフレームやスイングアームはゴツくてカッコいいですよね😀
🤗🌞👍👍👍
Que bacana 👏👏👊👊👍👍😄😄
obrigada!
👏👏👏👍👀🇲🇽✌️
👍